Hi, I recall such problem on my previous workplace. I am not sure but I think that the solution was to send the SPS & PPS in-band. Amit Yedidia.
________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Dan DuFeu Sent: Tuesday, August 25, 2009 6:47 PM To: LIVE555 Streaming Media - development & use Subject: Re: [Live-devel] quicktime client for h264 +1 I have this same issue with my H.264 stream. My Mpeg4 stream works fine with VLC and quicktime, however my H.264 stream works only with VLC. Quicktime performs as Haung describes. As far as I know, I've initialized the profile-level-id and sprop-parameter-sets properly. I've tried to see if I could get quicktime to output logs, but haven't found any such feature yet. Dan. From: [email protected] [mailto:[email protected]] On Behalf Of huang Sent: Monday, August 24, 2009 6:01 AM To: [email protected] Subject: [Live-devel] quicktime client for h264 Hi dear all, I have my own H264VideoStreamFramer and could stream h.264 to VLC and Quicktime. But when Quicktime as client, something was wrong: First, I started the server and Quicktime connected to server, after "PLAY" cmd, server sent data to Quicktime, but Quicktime had no image with increased time at left bottom concer. Then I restarted the server ( but client was still opened ), it worked normally. Do I miss something to trigger Quicktime at beginning ? Thanks Haung The information in this e-mail transmission contains proprietary and business sensitive information. Unauthorized interception of this e-mail may constitute a violation of law. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. You are also asked to contact the sender by reply email and immediately destroy all copies of the original message.
_______________________________________________ live-devel mailing list [email protected] http://lists.live555.com/mailman/listinfo/live-devel
