I'm using Live555 to replace an old streaming stack in a video / audio
recording system. One of the requirements of this system is that any
client playing back the media should be able to display the original time
at which the video / audio was recorded. In the previous system this
was supported by storing the original NTP timestamps from when the
video was recorded and reusing them in the RTCP packets when streaming.

>From my initial investigations, there seems to be no way to specify the
NTP timestamp to be used for an RTCP packet, nor to provide an offset
that could be applied against the wall clock to adjust the generated
timestamps.

Does anyone know of a way to achieve this, or an alternative way to provide
the original timestamps?

Kind regards.
--
Nick Ogden

G4S Technology
Tel:    +44 (0) 1684 857299
[email protected]<mailto:[email protected]>
www.g4stechnology.com
Challenge House, International Drive, Tewkesbury, Gloucestershire, GL20 8UQ, UK
P Please consider the environment before printing this email


________________________________
The details of this company are as follows:
G4S Technology Limited, Registered Office: Challenge House, International 
Drive, Tewkesbury, Gloucestershire GL20 8UQ, Registered in England No. 2382338.

This communication may contain information which is confidential, personal 
and/or privileged.

It is for the exclusive use of the intended recipient(s).
If you are not the intended recipient(s), please note that any distribution, 
forwarding, copying or use of this communication or the information in it is 
strictly prohibited.

Any personal views expressed in this e-mail are those of the individual sender 
and the company does not endorse or accept responsibility for them.

Prior to taking any action based upon this e-mail message, you should seek 
appropriate confirmation of its authenticity.

This e-mail has been scanned for all viruses by MessageLabs.
_______________________________________________
live-devel mailing list
[email protected]
http://lists.live555.com/mailman/listinfo/live-devel

Reply via email to