-----Original Message----- From: Ballantyne, Merrill
Well. that sort of was what I was asking- although non-melting is a relative term. I'm sure that means a 5 minute flame exposure or some such heat exposure limit because any solid can melt (under the right conditions). I guess that answers my question. I'll look for a flame rated hose- most likely the Trident double walled hose meets this criteria. REPLY ABYC spells out the criteria for a fire resistance test. Time limit is 2 minutes. Bottom line, just about anything used in the engine room which could melt, burn, or otherwise be damaged and thus increase the risk to the vessel must be fire rated. Makes good common sense. Its bad enough having to deal with a fire. You don't need complications. The reality is also, that if you can't get the fire under control in about 2 minutes you aren't going to make with portable fire extinguishes,. Common sense suggest your next move is to focus on abandoning the vessel safely. Larger vessels with built in fire fighting systems and the flotation ability to handle tons of water being sprayed on a fire have different criteria. Remember 200 gallons at 10 lb per imperial gallon = one ton. How much extra weight can your boat handle before it becomes unstable or acquires negative buoyancy, regards Arild
_______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://www.liveaboardnow.org/mailman/listinfo/liveaboard To subscribe send an email to [EMAIL PROTECTED] To unsubscribe send an email to [EMAIL PROTECTED] The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
