The ones I use are marked:

White-Rodgers
3F01-121
Fixed Setting
Snap Disc Fan Control
Close:120 deg F
Open: 110 deg F

I don't recall where I got them.

White Rodgers has a web site with those switches on it.


Norm
S/V Bandersnatch
Lying Julington Creek FL
30 07.72N  081 38.4W


> [Original Message]
> From: Peter Gelinas <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>; TWL2 <[EMAIL PROTECTED]>
> Date: 1/6/2008 3:01:04 PM
> Subject: (T&T: & TWL2:) Re: & TWL2:) Re: onan 8kw gen monitoring
>
>
>
> Norm, can yoube a bit more specific? I have been to Home Depot, and no
such animal exists
>
>
> > Date: Sat, 5 Jan 2008 17:54:35 -0800
> > Subject: (T&T: & TWL2:) Re: & TWL2:) Re: onan 8kw gen monitoring
> > From: [EMAIL PROTECTED]
> > To: [EMAIL PROTECTED]
> >
> >
> > I would advise you to do as I did and add a temperature switch
> > strapped on
> > the rubber exhaust hose just downstream of the exhaust elbow where the
> > seawater is injected into the exhaust stream. This is the first part
> > to
> > get hot after loss of seawater flow, for whatever reason, and early
> > warning
> > before anything gets damaged is a Good Thing. I used a Klixon type
> > switch
> > available at HVAC and probably Home Depot used to turn on attic fans,
> > normally open, closes at 120 deg F and wire it in parallel with the
> > oil
> > pressure switch/high block temp switch, so that when it closes the
> > genset
> > shuts down.
> >
> > Put another on the main engine in the same place and connect it to an
> > audible alarm.
> >


_______________________________________________
Liveaboard mailing list
[email protected]
To adjust your membership settings over the web 
http://www.liveaboardnow.org/mailman/listinfo/liveaboard
To subscribe send an email to [EMAIL PROTECTED]

To unsubscribe send an email to [EMAIL PROTECTED]
The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/

To search the archives http://www.mail-archive.com/[email protected]

The Mailman Users Guide can be found here 
http://www.gnu.org/software/mailman/mailman-member/index.html

Reply via email to