lists wrote:
> hdc: ATAPI 24X CD-ROM drive, 128kb Cache, DMA
> Uniform CD-ROM driver revision: 3.20
> ide-cd: cmd 0x28 timed out
> hdc: DMA interrupt recovery
> hdc: lost interrupt
> hdc: status error: status=0X58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was unknown
> hdc: drive not ready for command
Try the following two approaches:
1) Disabling DMA with the old IDE driver: linux ide_core.options="ide=nodma"
2) Switching to the new PATA driver (will rename the drives to /dev/sda and
/dev/scd0): linux pata
> I'll boot into the mandrake 8.2 installed and pull these from that as
> well if it will help.
It won't help.
--
Alexander E. Patrakov
--
http://linuxfromscratch.org/mailman/listinfo/livecd
FAQ: http://www.linuxfromscratch.org/faq/
Unsubscribe: See the above information page
