The patch didn't help but here is the bt. I'll go through my installation, this is looking like a local problem.
doug@doug-desktop:~$ gdb lives GNU gdb (GDB) 7.5-ubuntu Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/bin/lives...done. (gdb) run Starting program: /usr/bin/lives [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". [New Thread 0x7fffec8f6700 (LWP 20492)] [New Thread 0x7fffe6daa700 (LWP 20493)] LiVES 2.0.3 Copyright 2002-2013 Gabriel Finch ([email protected]) and others. LiVES comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details. [New Thread 0x7fffe5d53700 (LWP 20510)] LiVES info: Invalid effect farneback_analyserfarneback_analysersalsaman1 found in compound effect image_stabilizer, line 4 LiVES info: Invalid effect farneback_analyserfarneback_analysersalsaman1 found in compound effect motion_analyser, line 4 [New Thread 0x7fffbed40700 (LWP 20998)] Program received signal SIGSEGV, Segmentation fault. weed_find_leaf (key=<optimized out>, leaf=<optimized out>) at weed-gslice.c:204 204 if (!weed_strcmp((char *)leaf->key,(char *)key)) return leaf; (gdb) bt #0 weed_find_leaf (key=<optimized out>, leaf=<optimized out>) at weed-gslice.c:204 #1 _weed_leaf_get (plant=0x500000004, plant@entry=<error reading variable: Cannot access memory at address 0x7fffffffbe48>, key=0x5b4229 <Address 0x5b4229 out of bounds>, idx=0, value=0x0) at weed-gslice.c:378 (gdb) On 13-04-18 06:14 AM, salsaman wrote: > Doug, > its hard to see what the problem is, but can you try this: > save the attached patch file in your lives/src directory, then: > > patch -p0 < test.patch > > then make and make install again. > > There is a chance it will fix the problem. > > > Gabriel. > > > > http://lives.sourceforge.net > https://www.ohloh.net/accounts/salsaman > > > On Wed, Apr 17, 2013 at 8:22 PM, Doug Webb <[email protected] > <mailto:[email protected]>> wrote: > > Looks like I'm using version 3 but I have version 2 installed also. I > think this is the stock install from Ubuntu. Here is a further bt > > doug@doug-desktop:~$ gdb lives > GNU gdb (GDB) 7.5-ubuntu > Copyright (C) 2012 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later > <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show > copying" > and "show warranty" for details. > This GDB was configured as "x86_64-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>... > Reading symbols from /usr/bin/lives...done. > (gdb) run > Starting program: /usr/bin/lives > [Thread debugging using libthread_db enabled] > Using host libthread_db library > "/lib/x86_64-linux-gnu/libthread_db.so.1". > [New Thread 0x7fffec8f6700 (LWP 16345)] > [New Thread 0x7fffe6daa700 (LWP 16346)] > > LiVES 2.0.3 > Copyright 2002-2013 Gabriel Finch ([email protected] > <mailto:[email protected]>) and others. > LiVES comes with ABSOLUTELY NO WARRANTY > This is free software, and you are welcome to redistribute it > under certain conditions; see the file COPYING for details. > > [New Thread 0x7fffe5d53700 (LWP 16363)] > LiVES info: Invalid effect > farneback_analyserfarneback_analysersalsaman1 > found in compound effect image_stabilizer, line 4 > > LiVES info: Invalid effect > farneback_analyserfarneback_analysersalsaman1 > found in compound effect motion_analyser, line 4 > > [New Thread 0x7fffbed40700 (LWP 16852)] > > Program received signal SIGSEGV, Segmentation fault. > 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > (gdb) bt > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > mt@entry=<error reading variable: Cannot access memory at address > 0x7fffffffcb48>, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > #1 0x00000000005540f8 in draw_block (mt=0x254f5a0, > cairo=<error reading variable: Cannot access memory at address > 0x7fffffffcab8>, > surf=<error reading variable: Cannot access memory at address > 0x7fffffffcac0>, block=0x25b4100, x1=0, > x2=<error reading variable: Cannot access memory at address > 0x7fffffffcab0>) at multitrack.c:831 > (gdb) q > A debugging session is active. > > Inferior 1 [process 16342] will be killed. > > Quit anyway? (y or n) y > Quitting: Couldn't get registers: No such process. > doug@doug-desktop:~$ > > > > > On 13-04-17 02:12 PM, salsaman wrote: > > I need to see a longer backtrace. Can you press return a couple of > > times after entering "bt" ? > > > > What version of gtk are you using, gtk 2 or gtk 3 ? > > > > Regards, > > Gabriel. > > > > > > > > http://lives.sourceforge.net > > https://www.ohloh.net/accounts/salsaman > > > > > > On Wed, Apr 17, 2013 at 4:44 PM, Doug Webb <[email protected] > <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > I couldn't seem to give the -debug arg to lives under gdb so > here > > it is > > without. This time it hung up instead of crashing. > > > > > > doug@doug-desktop:~$ gdb lives > > GNU gdb (GDB) 7.5-ubuntu > > Copyright (C) 2012 Free Software Foundation, Inc. > > License GPLv3+: GNU GPL version 3 or later > > <http://gnu.org/licenses/gpl.html> > > This is free software: you are free to change and > redistribute it. > > There is NO WARRANTY, to the extent permitted by law. Type > "show > > copying" > > and "show warranty" for details. > > This GDB was configured as "x86_64-linux-gnu". > > For bug reporting instructions, please see: > > <http://www.gnu.org/software/gdb/bugs/>... > > Reading symbols from /usr/bin/lives...done. > > (gdb) run > > Starting program: /usr/bin/lives > > [Thread debugging using libthread_db enabled] > > Using host libthread_db library > > "/lib/x86_64-linux-gnu/libthread_db.so.1". > > [New Thread 0x7fffec8f6700 (LWP 12347)] > > [New Thread 0x7fffe6daa700 (LWP 12348)] > > > > LiVES 2.0.3 > > Copyright 2002-2013 Gabriel Finch ([email protected] > <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>) and > others. > > LiVES comes with ABSOLUTELY NO WARRANTY > > This is free software, and you are welcome to redistribute it > > under certain conditions; see the file COPYING for details. > > > > [New Thread 0x7fffe5d53700 (LWP 12365)] > > LiVES info: Invalid effect > > farneback_analyserfarneback_analysersalsaman1 > > found in compound effect image_stabilizer, line 4 > > > > LiVES info: Invalid effect > > farneback_analyserfarneback_analysersalsaman1 > > found in compound effect motion_analyser, line 4 > > > > [New Thread 0x7fffbed40700 (LWP 12853)] > > [Thread 0x7fffe5d53700 (LWP 12365) exited] > > > > Program received signal SIGSEGV, Segmentation fault. > > 0x00007ffff6916c30 in g_type_check_instance_cast () > > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > > (gdb) bt > > #0 0x00007ffff6916c30 in g_type_check_instance_cast () > > from /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 > > #1 0x00000000005540f8 in draw_block (mt=0x254cf80, > > mt@entry=<error reading variable: Cannot access memory > at address > > 0x7fffffffcb48>, > > cairo=<error reading variable: Cannot access memory at > address > > 0x7fffffffcab8>, > > surf=<error reading variable: Cannot access memory at > address > > 0x7fffffffcac0>, block=0x29b68b0, x1=0, > > x2=<error reading variable: Cannot access memory at address > > 0x7fffffffcab0>) at multitrack.c:831 > > (gdb) > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > Precog is a next-generation analytics platform capable of advanced > > analytics on semi-structured data. The platform includes APIs > for building > > apps and a phenomenal toolset for data science. Developers can use > > our toolset for easy data analysis & visualization. Get a free > account! > > http://www2.precog.com/precogplatform/slashdotnewsletter > > > > > > _______________________________________________ > > Lives-users mailing list > > [email protected] > <mailto:[email protected]> > > https://lists.sourceforge.net/lists/listinfo/lives-users > > > > ------------------------------------------------------------------------------ > Precog is a next-generation analytics platform capable of advanced > analytics on semi-structured data. The platform includes APIs for > building > apps and a phenomenal toolset for data science. Developers can use > our toolset for easy data analysis & visualization. Get a free > account! > http://www2.precog.com/precogplatform/slashdotnewsletter > _______________________________________________ > Lives-users mailing list > [email protected] > <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/lives-users > > > > > ------------------------------------------------------------------------------ > Precog is a next-generation analytics platform capable of advanced > analytics on semi-structured data. The platform includes APIs for building > apps and a phenomenal toolset for data science. Developers can use > our toolset for easy data analysis & visualization. Get a free account! > http://www2.precog.com/precogplatform/slashdotnewsletter > > > _______________________________________________ > Lives-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/lives-users ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Lives-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/lives-users
