================ @@ -1,195 +1,147 @@ -# Contributing to LLDB-DAP - -This guide describes how to extend and contribute to lldb-dap. -For documentation on how to use lldb-dap, see [lldb-dap's README](https://github.com/llvm/llvm-project/blob/main/lldb/tools/lldb-dap/README.md). - -lldb-dap and LLDB are developed under the umbrella of the -[LLVM project](https://llvm.org/). As such, the -"[Getting Started with the LLVM System](https://llvm.org/docs/GettingStarted.html)", -"[Contributing to LLVM](https://llvm.org/docs/Contributing.html)" and -"[LLVM coding standard](https://llvm.org/docs/CodingStandards.html)" -guides might also be relevant, if you are a first-time contributor to the LLVM -project. - -lldb-dap's source code is [part of the LLVM -repository](https://github.com/llvm/llvm-project/tree/main/lldb/tools/lldb-dap) -on Github. We use Github's [issue -tracker](https://github.com/llvm/llvm-project/tree/main/lldb/tools/lldb-dap) -and patches can be submitted via [pull -requests](https://github.com/llvm/llvm-project/pulls). - -## Building `lldb-dap` from soruce - -To build lldb-dap from source, first need to [setup a LLDB build](https://lldb.llvm.org/resources/build.html). -After doing so, run `ninja lldb-dap`. To use your freshly built `lldb-dap` -binary, install the VS Code extension and point it to lldb-dap by setting the -`lldb-dap.executable-path` setting. - -## Responsibilities of LLDB, lldb-dap and the Visual Studio Code Extension - -Under the hood, the UI-based debugging experience is fueled by three separate -components: - -* LLDB provides general, IDE-indepedent debugging features, such as: - loading binaries / core dumps, interpreting debug info, setting breakpoints, - pretty-printing variables, etc. The `lldb` binary exposes this functionality - via a command line interface. -* `lldb-dap` exposes LLDB's functionality via the - "[Debug Adapter Protocol](https://microsoft.github.io/debug-adapter-protocol/)", - i.e. a protocol through which various IDEs (VS Code, Emacs, vim, neovim, ...) - can interact with a wide range of debuggers (`lldb-dap` and many others). -* The VS Code extension exposes the lldb-dap binary within VS Code. It acts - as a thin wrapper around the lldb-dap binary, and adds VS-Code-specific UI - integration on top of lldb-dap, such as autocompletion for `launch.json` - configuration files. - -Since lldb-dap builds on top of LLDB, all of LLDB's extensibility mechanisms -such as [Variable Pretty-Printing](https://lldb.llvm.org/use/variable.html), -[Frame recognizers](https://lldb.llvm.org/use/python-reference.html#writing-lldb-frame-recognizers-in-python) -and [Python Scripting](https://lldb.llvm.org/use/python.html) are available -also in lldb-dap. - -When adding new functionality, you generally want to add it on the lowest -applicable level. I.e., quite frequently you actually want to add functionality -to LLDB's core in order to improve your debugging experience in VS Code. - -### The Debug Adapter Protocol - -The most relevant resources for the Debug Adapter Protocol are: -* [The overview](https://microsoft.github.io/debug-adapter-protocol/overview) - which provides a high-level introduction, -* the [human-readable specification](https://microsoft.github.io/debug-adapter-protocol/specification), and -* the [JSON-schema specification](https://github.com/microsoft/debug-adapter-protocol/blob/main/debugAdapterProtocol.json). - -lldb-dap adds some additional non-standard extensions to the protocol. To take -advantage of those extensions, IDE-specific support code is needed, usually -inside the VS Code extension. When adding a new extension, please first look -through the [issue tracker of the Debug Adapter -Protocol](https://github.com/microsoft/debug-adapter-protocol/issues) to check -if there already is a proposal serving your use case. If so, try to take -inspiration from it. If not, consider opening an upstream issue. - -To avoid naming collisions with potential future extensions of the Debug -Adapter protocol, all non-standard extensions should use the prefix -`$__lldb_extension` in their JSON property names. - -### Debugging the Debug Adapter Protocol - -To debug the Debug Adapter Protocol, point the `LLDBDAP_LOG` environment -variable to a file on your disk. lldb-dap will log all communication received -from / sent to the IDE to the provided path. In the VS Code extension, you -can also set the log path through the `lldb-dap.log-path` VS Code setting. - -## Building the VS Code extension from source - -Installing the plug-in is very straightforward and involves just a few steps. - -In most cases, installing the VS Code extension from the [VS Code -Marketplace](https://marketplace.visualstudio.com/items?itemName=llvm-vs-code-extensions.lldb-dap) -and pointing it to a locally built lldb-dap binary is sufficient. Building -the VS Code extension from source is only necessary if the TypeScript code is -changed. - -### Pre-requisites - -- Install a modern version of node (e.g. `v20.0.0`). -- On VS Code, execute the command `Install 'code' command in PATH`. You need to - do it only once. This enables the command `code` in the PATH. - -### Packaging and installation - -```bash -cd /path/to/lldb/tools/lldb-dap -npm install -npm run package # This also compiles the extension. -npm run vscode-install -``` - -On VS Code, set the setting `lldb-dap.executable-path` to the path of your local -build of `lldb-dap`. - -And then you are ready! - -### Updating the extension - -Updating the extension is pretty much the same process as installing it from -scratch. However, VS Code expects the version number of the upgraded extension -to be greater than the previous one, otherwise the installation step might have -no effect. - -```bash -# Bump version in package.json -cd /path/to/lldb/tools/lldb-dap -npm install -npm run package -npm run vscode-install -``` +# Getting started with `lldb-dap` -Another way upgrade without bumping the extension version is to first uninstall -the extension, then reload VS Code, and then install it again. This is -an unfortunate limitation of the editor. - -```bash -cd /path/to/lldb/tools/lldb-dap -npm run vscode-uninstall -# Then reload VS Code: reopen the IDE or execute the `Developer: Reload Window` -# command. -npm run package -npm run vscode-install -``` - -### Deploying for Visual Studio Code +Welcome to the `llb-dap` documentation! -The easiest way to deploy the extension for execution on other machines requires -copying `lldb-dap` and its dependencies into a`./bin` subfolder and then create a -standalone VSIX package. +`lldb-dap` brings the power of `lldb` into any editor or IDE that supports the +[Debug Adapter Protocol (DAP)](https://microsoft.github.io/debug-adapter-protocol/). -```bash -cd /path/to/lldb/tools/lldb-dap -mkdir -p ./bin -cp /path/to/a/built/lldb-dap ./bin/ -cp /path/to/a/built/liblldb.so ./bin/ -npm run package -``` +## Prerequisites -This will produce the file `./out/lldb-dap.vsix` that can be distributed. In -this type of installation, users don't need to manually set the path to -`lldb-dap`. The extension will automatically look for it in the `./bin` -subfolder. +In order to begin debugging with `lldb-dap`, you may first need to acquire the +`lldb-dap` binary from an LLVM distribution. For general LLVM releases visit +https://releases.llvm.org/ or check your systems preferred package manager for +the `lldb` package. -*Note: It's not possible to use symlinks to `lldb-dap`, as the packaging tool -forcefully performs a deep copy of all symlinks.* +In some cases, a language specific build of `lldb` / `lldb-dap` may also be +available as part of the languages toolchain. For example the +[swift language](https://www.swift.org/) toolchain includes additional language +integrations in `lldb` and the toolchain builds provider both the `lldb` driver +binary and `lldb-dap` binary. -*Note: It's possible to use this kind flow for local installations, but it's -not recommended because updating `lldb-dap` requires rebuilding the extension.* +## IDE Integration -## Formatting the Typescript code +In addition to the `lldb-dap` binary, some IDEs have additional extensions to +support debugging. -This is also very simple, just run: +- Visual Studio Code - +[LLDB DAP Extension](https://marketplace.visualstudio.com/items?itemName=llvm-vs-code-extensions.lldb-dap) +<!-- Add other IDE integrations. --> -```bash -npm run format -``` +## Launching a program -## Working with the VS Code extension from another extension +To launch an executable for debugging, first define a launch configuration tells +`lldb-dap` how to launch the binary. -The VS Code extension exposes the following [VS Code -commands](https://code.visualstudio.com/api/extension-guides/command), -which can be invoked by other debugger extensions to leverage this extension's -settings and logic. The commands help resolve configuration, create adapter -descriptor, and get the lldb-dap process for state tracking, additional -interaction, and telemetry. +A simple launch configuration may look like +```json +{ + "type": "lldb-dap", + "request": "launch", + "name": "Debug a.out", + "program": "a.out" +} ``` ---------------- JDevlieghere wrote:
Aren't attach & launch configurations a VS Code concept? Presumably we need to mention them here to motivate all the configuration options we support. Maybe we should frame it as "depending on your editor, you have to specify how to launch or attach". For VS Code, bla bla bla. https://github.com/llvm/llvm-project/pull/172580 _______________________________________________ lldb-commits mailing list [email protected] https://lists.llvm.org/cgi-bin/mailman/listinfo/lldb-commits
