Hi,
setting target.use-fast-stepping to false did indeed solve this issue,
albeit at the cost of increased runtime obviously. However, i ran into
another issue right after i stepped out of the previously problematic
function: http://sht.tl/bdAKRC
Trying to source-level step this function (with use-fast-stepping=false)
results in 1) the disassembly getting all kinds of messed up and 2) the
process not stepping but hanging at the `cmp r1, #0` instruction. The
original assembly code around that PC looks like this:
LBB24_1: @ %label0
@ =>This Inner Loop Header: Depth=1
@DEBUG_VALUE:
[J]java.lang.Thread.<init>(Ljava/lang/Runnable;Ljava/lang/String;)V:__$env
<- R5
ldrexd r1, r2, [r0]
strexd r1, r6, r6, [r0]
cmp r1, #0
bne LBB24_1
@ BB#2: @ %label0
@DEBUG_VALUE:
[J]java.lang.Thread.<init>(Ljava/lang/Runnable;Ljava/lang/String;)V:__$env
<- R5
dmb ish
movs r1, #5
A simple loop, which is actually part of an inlined function. We had some
issues with inlined functions previously, i assume this issue is related.
Interestingly enough, the back trace is also a bit wonky:
(lldb) bt
* thread #1: tid = 0x18082, 0x0021a9b4
AttachTestIOSDev`[J]java.lang.Thread.<init>(Ljava/lang/Runnable;Ljava/lang/String;)V
[inlined] [j]java.lang.Thread.threadPtr(J)[set] + 14 at Thread.java:1, stop
reason = trace
* frame #0: 0x0021a9b4
AttachTestIOSDev`[J]java.lang.Thread.<init>(Ljava/lang/Runnable;Ljava/lang/String;)V
[inlined] [j]java.lang.Thread.threadPtr(J)[set] + 14 at Thread.java:1
frame #1: 0x0021a9a6
AttachTestIOSDev`[J]java.lang.Thread.<init>(__$env=0x01662fc8,
__$this=0x64da3833, runnable=0xa4f07400, threadName=0x00286000)V + 46 at
Thread.java:138
There should be a lot more frame. I'm gonna try to dig up some more details.
Thanks a lot!
Mario
On Sun, Nov 30, 2014 at 1:32 AM, Jason Molenda <ja...@molenda.com> wrote:
> The size of the breakpoint instruction is set by
> GetSoftwareBreakpointTrapOpcode(). In your case, most likely you're in
> PlatformDarwin::GetSoftwareBreakpointTrapOpcode() - lldb uses the symbol
> table (from the binary file) to determine if the code in a given function
> is arm or thumb. If it's arm, a 4 byte breakpoint is used. If it's thumb,
> a 2 byte breakpoint. Of course thumbv2 of T32 instructions can be 4 bytes
> -- the blne instruction is in your program -- but I assume the 2 byte
> breakpoint instruction still works correctly in these cases; the cpu sees
> the 2-byte instruction and stops execution.
>
> I am a little wary about the fact that this comes after an it instruction,
> I kind of vaguely remember issues with that instruction's behavior.
>
> It shouldn't make any difference but you might want to try
>
> (lldb) settings set target.use-fast-stepping false
>
> which will force lldb to single instruction step through the function.
> Right now lldb is looking at the instruction stream and putting breakpoints
> on branch/call/jump instructions to do your high-level "step" command,
> instead of stopping on every instruction. It is possible there could be a
> problem with that approach and the it instruction. Please report back if
> this changes the behavior.
>
> J
>
>
> > On Nov 26, 2014, at 9:22 AM, Mario Zechner <badlogicga...@gmail.com>
> wrote:
> >
> > I dug a little deeper, inspecting the GDB remote packets send by LLDB to
> perform the stepping. It appears when sending memory breakpoint commands
> used for stepping, the size of the instruction being replaced isn't taken
> into account, or writing back the original instruction isn't done properly.
> The following log shows what happens when stepping into the previously
> mentioned function:
> >
> > (lldb) s
> > Process 166 stopped
> > * thread #1: tid = 0x0fd9, 0x002602e0
> AttachTestIOSDev`[J]java.lang.Object.<init>(__$env=0x016bffc8,
> __$this=0x017864b0)V + 12 at Object.java:136, queue =
> 'com.apple.main-thread', stop reason = step in
> > frame #0: 0x002602e0
> AttachTestIOSDev`[J]java.lang.Object.<init>(__$env=0x016bffc8,
> __$this=0x017864b0)V + 12 at Object.java:136
> > (lldb) disassemble -p
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V + 12 at Object.java:136:
> > -> 0x2602e0: ldr r2, [r1]
> > 0x2602e2: ldr r2, [r2, #0x30]
> > 0x2602e4: tst.w r2, #0x100000
> > 0x2602e8: it ne
> > (lldb) s
> > Process 166 stopped
> > * thread #1: tid = 0x0fd9, 0x002602ec
> AttachTestIOSDev`[J]java.lang.Object.<init>(__$env=0x016bffc8,
> __$this=0x017864b0)V + 24 at Object.java:136, queue =
> 'com.apple.main-thread', stop reason = EXC_BAD_INSTRUCTION
> (code=EXC_ARM_UNDEFINED, subcode=0xffd1b001)
> > frame #0: 0x002602ec
> AttachTestIOSDev`[J]java.lang.Object.<init>(__$env=0x016bffc8,
> __$this=0x017864b0)V + 24 at Object.java:136
> > (lldb) disassemble -p
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V + 24 at Object.java:136:
> > -> 0x2602ec: .long 0xb001ffd1 ; unknown opcode
> > 0x2602f0: pop {r7, pc}
> >
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V + 30:
> > 0x2602f2: nop
> >
> > AttachTestIOSDev`[J]java.lang.Object.clone()Ljava/lang/Object; at
> Object.java:154:
> > 0x2602f4: push {r4, r5, r7, lr}
> > (lldb) disassemble -f
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V at Object.java:136:
> > 0x2602d4: push {r7, lr}
> > 0x2602d6: mov r7, sp
> > 0x2602d8: sub sp, #0x4
> > 0x2602da: movs r2, #0x0
> > 0x2602dc: str r2, [sp]
> > 0x2602de: str r1, [sp]
> > 0x2602e0: ldr r2, [r1]
> > 0x2602e2: ldr r2, [r2, #0x30]
> > 0x2602e4: tst.w r2, #0x100000
> > 0x2602e8: it ne
> > 0x2602ea: blne 0x44b290 ; _bcRegisterFinalizer
> > 0x2602ee: add sp, #0x4
> > 0x2602f0: pop {r7, pc}
> >
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V + 30:
> > 0x2602f2: nop
> >
> > The first step succeeds and ends up right after the prologue, at
> 0x2602e0: ldr r2, [r1]. The next step ends up at 0x2602ec: .long
> 0xb001ffd1 which is wrong, it should be 0x2602ea: blne 0x44b290.
> >
> > The GDB remote conversation between lldb and the debugserver on the
> device (only relevant parts):
> >
> > # First step
> > lldb->debugserver: $Z0,2602e0,2#73
> > debugserver->lldb: $OK#00
> > lldb->debugserver: $vCont;c:0fd9#15
> > debugserver->lldb: (320)
> $T05thread:fd9;qaddr:37ebfad0;threads:fd9,ffa,ffb,ffd,fff,1009,100a,100b;00:c8ff6b01;01:b0647801;02:00000000;03:c87d6a00;04:00000000;05:c8ff6b01;06:fc6a6501;07:0c6a6501;08:90e96b01;09:28000000;0a:74a0ea37;0b:c8ff6b01;0c:b09e5b00;0d:086a6501;0e:d1b22000;0f:
> >
> > # Second step
> > lldb->debugserver: $Z0,2602ea,2#a4
> > debugserver->lldb: $OK#00
> > lldb->debugserver: $vCont;c:0fd9#15
> > debugserver->lldb: (324)
> $T92thread:fd9;qaddr:37ebfad0;threads:fd9,ffa,ffb,ffd,fff,1009,100a,100b;00:c8ff6b01;01:b0647801;02:01004300;03:c87d6a00;04:00000000;05:c8ff6b01;06:fc6a6501;07:0c6a6501;08:90e96b01;09:28000000;0a:74a0ea37;0b:c8ff6b01;0c:b09e5b00;0d:086a6501;0e:d1b22000;0f:
> >
> > For the first step, a 2 byte memory breakpoint is written to 0x2602e0
> ($Z0,2602e0,2#73), which is where the first step ended up. The instruction
> that got replaced is 2 bytes long. The GDB command wrote a 2 bytes memory
> breakpoint to the address, so all is good.
> >
> > For the second step, a 2 byte memory breakpoint is written to 0x2602ea
> ($Z0,2602ea,2#a4). But instead of ending up at 0x2602ec, which is in the
> middle of the 4-byte blne instruction.
> >
> > Is it correct for LLDB to set a 2 byte memory breakpoint instead of a
> 4-byte memory breakpoint in this case? The PC will be set to an invalid
> address, which then causes the EXC_BAD_INSTRUCTION.
> >
> > Am i understanding this correctly? Is there a way for me to fix this?
> >
> > On Wed, Nov 26, 2014 at 5:26 PM, Mario Zechner <badlogicga...@gmail.com>
> wrote:
> > Hi,
> >
> > we generate thumbv7 binaries for iOS devices. We deploy, launch and
> debug those via LLDB. Stepping into functions seems to almost always
> generate a EXC_BAD_INSTRUCTION signal. The signal is not generated when
> running the app without the debugger attached. It is also not generated
> when we attach a debugger, but simply let the app run without breakpoints
> or any stepping.
> >
> > Here's one of these function's LLVM IR:
> >
> > =======================
> > define external void @"[J]java.lang.Object.<init>()V"(%Env* %p0,
> %Object* %p1) nounwind noinline optsize {
> > label0:
> > call void @"llvm.dbg.declare"(metadata !{%Env* %p0}, metadata !19),
> !dbg !{i32 136, i32 0, metadata !{i32 786478, metadata !0, metadata !1,
> metadata !"[J]java.lang.Object.<init>()V", metadata
> !"[J]java.lang.Object.<init>()V", metadata !"", i32 136, metadata !15, i1
> false, i1 true, i32 0, i32 0, null, i32 256, i1 false, void (%Env*,
> %Object*)* @"[J]java.lang.Object.<init>()V", null, null, metadata !17, i32
> 136}, null}
> > %r0 = alloca %Object*
> > store %Object* null, %Object** %r0
> > call void @"llvm.dbg.declare"(metadata !{%Object** %r0}, metadata
> !21), !dbg !{i32 136, i32 0, metadata !14, null}
> > store %Object* %p1, %Object** %r0
> > call void @"register_finalizable"(%Env* %p0, %Object* %p1), !dbg
> !{i32 136, i32 0, metadata !18, null}
> > ret void, !dbg !{i32 136, i32 0, metadata !18, null}
> > }
> > =======================
> >
> > The corresponding thumbv7 assembler code as generated by LLVM:
> >
> > =======================
> > .globl "_[J]java.lang.Object.<init>()V"
> > .align 2
> > .code 16 @ @"[J]java.lang.Object.<init>()V"
> > .thumb_func "_[J]java.lang.Object.<init>()V"
> > "_[J]java.lang.Object.<init>()V":
> > .cfi_startproc
> > Lfunc_begin18:
> > .loc 1 136 0 @ Object.java:136:0
> > @ BB#0: @ %label0
> > .loc 1 136 0 @ Object.java:136:0
> > push {r7, lr}
> > mov r7, sp
> > sub sp, #4
> > @DEBUG_VALUE: [J]java.lang.Object.<init>()V:__$env <- R0
> > movs r2, #0
> > str r2, [sp]
> > str r1, [sp]
> > .loc 1 136 0 prologue_end @ Object.java:136:0
> > Ltmp6:
> > ldr r2, [r1]
> > ldr r2, [r2, #48]
> > tst.w r2, #1048576
> > Ltmp7:
> > @DEBUG_VALUE: [J]java.lang.Object.<init>()V:__$env <- R0
> > it ne
> > blxne __bcRegisterFinalizer
> > add sp, #4
> > pop {r7, pc}
> > Ltmp8:
> > Lfunc_end18:
> > "L_[J]java.lang.Object.<init>()V_end":
> >
> > .cfi_endproc
> > =======================
> >
> > Now, when stepping into this function, LLDB receives a signal from the
> debug server:
> >
> > =======================
> > (lldb) s
> > Process 176 stopped
> > * thread #1: tid = 0x11f5, 0x0023e2ec
> AttachTestIOSDev`[J]java.lang.Object.<init>(__$env=0x0169efc8,
> __$this=0x0174cd10)V + 24 at Object.java:136, queue =
> 'com.apple.main-thread', stop reason = EXC_BAD_INSTRUCTION
> (code=EXC_ARM_UNDEFINED, subcode=0xffd1b001)
> > frame #0: 0x0023e2ec
> AttachTestIOSDev`[J]java.lang.Object.<init>(__$env=0x0169efc8,
> __$this=0x0174cd10)V + 24 at Object.java:136
> > =======================
> >
> > Disassembling around the PC gives:
> >
> > =======================
> > (lldb) disassemble --pc
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V + 24 at Object.java:136:
> > -> 0x23e2ec: .long 0xb001ffd1 ; unknown opcode
> > 0x23e2f0: pop {r7, pc}
> >
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V + 30:
> > 0x23e2f2: nop
> >
> > Disassembling until the beginning of the frame gives:
> >
> > (lldb) disassemble -f
> > AttachTestIOSDev`[J]java.lang.Object.<init>()V at Object.java:136:
> > 0x23e2d4: push {r7, lr}
> > 0x23e2d6: mov r7, sp
> > 0x23e2d8: sub sp, #0x4
> > 0x23e2da: movs r2, #0x0
> > 0x23e2dc: str r2, [sp]
> > 0x23e2de: str r1, [sp]
> > 0x23e2e0: ldr r2, [r1]
> > 0x23e2e2: ldr r2, [r2, #0x30]
> > 0x23e2e4: tst.w r2, #0x100000
> > 0x23e2e8: it ne
> > 0x23e2ea: blne 0x429290 ; _bcRegisterFinalizer
> > 0x23e2ee: add sp, #0x4
> > 0x23e2f0: pop {r7, pc}
> >
> > Accprding to this, execution should never end up at address 0x23e2ec.
> That's right in the middle of the blne and add instructions in the second
> disassembly. I have a hunch that the debugserver on the device may
> interfere here, e.g. add a trap instruction to implement the stepping. I'm
> not quite sure what to make of it.
> >
> > I'd appreciate any hints. If you require more information, i got plenty
> of logs :)
> >
> > Thanks,
> > Mario
> >
> > _______________________________________________
> > lldb-dev mailing list
> > lldb-dev@cs.uiuc.edu
> > http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev
>
>
_______________________________________________
lldb-dev mailing list
lldb-dev@cs.uiuc.edu
http://lists.cs.uiuc.edu/mailman/listinfo/lldb-dev
