Dmitry Eremin-Solenikov(lumag) replied on github web page:
include/odp/api/spec/comp.h
line 345
@@ -0,0 +1,873 @@
+/* Copyright (c) 2017, Linaro Limited
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file
+ *
+ * ODP Compression
+ */
+
+#ifndef ODP_API_COMP_H_
+#define ODP_API_COMP_H_
+
+#include <odp/visibility_begin.h>
+#include <odp/api/support.h>
+#include <odp/api/packet.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @defgroup odp_compression ODP COMP
+ * ODP Compression is an API set to do compression+hash or decompression+hash
+ * operations on data. Hash is calculated on plaintext.
+ *
+ * if opcode = ODP_COMP_COMPRESS, then it will apply hash and then compress,
+ * if opcode = ODP_COMP_DECOMPRESS, then it will decompress and then apply
+ * hash.
+ * Independent hash-only operations are not supported. Implementation should
+ * perform hash along with valid compression algo.
+ * Macros, enums, types and operations to utilize compression interface.
+ * @{
+ */
+
+/**
+ * @def ODP_COMP_SESSION_INVALID
+ * Invalid session handle
+ */
+
+/**
+ * @typedef odp_comp_session_t
+ * Compression/Decompression session handle
+ */
+
+/**
+ * Compression API operation mode
+ */
+typedef enum {
+ /** Synchronous, return results immediately */
+ ODP_COMP_SYNC,
+ /** Asynchronous, return results via event queue */
+ ODP_COMP_ASYNC
+} odp_comp_op_mode_t;
+
+/**
+ * Comp API operation type.
+ *
+ */
+typedef enum {
+ /** Compress */
+ ODP_COMP_OP_COMPRESS,
+ /** Decompress */
+ ODP_COMP_OP_DECOMPRESS
+} odp_comp_op_t;
+
+/**
+ * Comp API hash algorithm
+ *
+ */
+typedef enum {
+ /** ODP_COMP_HASH_ALG_NONE - No hash algorithm selected. */
+ ODP_COMP_HASH_ALG_NONE,
+ /** ODP_COMP_HASH_ALG_SHA1 - SHA-1 hash algorithm. */
+ ODP_COMP_HASH_ALG_SHA1,
+ /** ODP_COMP_HASH_ALG_SHA256 - SHA-2 hash algorithm
+ * 256-bit digest length.
+ */
+ ODP_COMP_HASH_ALG_SHA256
+} odp_comp_hash_alg_t;
+
+/**
+ * Comp API compression algorithm
+ *
+ */
+typedef enum {
+ /** No algorithm specified.
+ * Means no compression, output == input.
+ * if provided, no operation (compression/decompression or hash)
+ * applied on input. Added for testing purpose.
+ */
+ ODP_COMP_ALG_NULL,
+ /** DEFLATE - RFC1951 */
+ ODP_COMP_ALG_DEFLATE,
+ /** ZLIB - RFC1950 */
+ ODP_COMP_ALG_ZLIB,
+ /** LZS */
+ ODP_COMP_ALG_LZS
+} odp_comp_alg_t;
+
+/**
+ * Comp API session creation return code
+ *
+ */
+typedef enum {
+ /** Session created */
+ ODP_COMP_SES_CREATE_ERR_NONE,
+ /** Creation failed, no resources */
+ ODP_COMP_SES_CREATE_ERR_ENOMEM,
+ /** Creation failed, bad compression params */
+ ODP_COMP_SES_CREATE_ERR_INV_COMP,
+ /** Creation failed, bad hash params */
+ ODP_COMP_SES_CREATE_ERR_INV_HASH,
+ /** Creation failed,requested configuration not supported*/
+ ODP_COMP_SES_CREATE_ERR_NOT_SUPPORTED
+} odp_comp_ses_create_err_t;
+
+/**
+ * Comp API operation return codes
+ *
+ */
+typedef enum {
+ /** Operation completed successfully*/
+ ODP_COMP_ERR_NONE,
+ /** Operation paused due to insufficient output buffer.
+ *
+ * This is not an error condition. On seeing this situation,
+ * Implementation should maintain context of in-progress operation and
+ * application should call packet processing API again with valid
+ * output buffer but no other alteration to operation params
+ * (odp_comp_op_param_t).
+ *
+ * if using async mode, application should either make sure to
+ * provide sufficient output buffer size OR maintain relevant
+ * context (or ordering) information with respect to each input packet
+ * en-queued for processing.
+ *
+ */
+ ODP_COMP_ERR_OUT_OF_SPACE,
+ /** Invalid user data pointers */
+ ODP_COMP_ERR_DATA_PTR,
+ /** Invalid input data size */
+ ODP_COMP_ERR_DATA_SIZE,
+ /** Compression Algo failure */
+ ODP_COMP_ERR_ALGO_FAIL,
+ /** Error if operation has been requested in an invalid state */
+ ODP_COMP_ERR_INV_STATE,
+ /** Error if API does not support any of the operational parameter. */
+ ODP_COMP_ERR_NOT_SUPPORTED,
+ /** Error if session is invalid. */
+ ODP_COMP_ERR_INV_SESS
+} odp_comp_err_t;
+
+/**
+ * Comp API enumeration for preferred compression level/speed. Applicable
+ * only for compression operation not decompression.
+ * Value provided defines a trade-off between speed and compression ratio.
+ *
+ * If compression level == ODP_COMP_LEVEL_MIN, output will be produced at
+ * fastest possible rate,
+ *
+ * If compression level == ODP_COMP_LEVEL_MAX, output will be highest possible
+ * compression,
+ *
+ * compression level == ODP_COMP_LEVEL_DEFAULT means implementation will use
+ * its default choice of compression level.
+ *
+ */
+typedef enum {
+ /* Use implementation default */
+ ODP_COMP_LEVEL_DEFAULT = 0,
+ /** Minimum compression (fastest in speed) */
+ ODP_COMP_LEVEL_MIN,
+ /** Maximum compression (slowest in speed) */
+ ODP_COMP_LEVEL_MAX,
+} odp_comp_level_t;
+
+/**
+ * Comp API enumeration for huffman encoding. Valid for compression operation.
+ *
+ */
+typedef enum {
+ /** use implementation default to choose between compression codes */
+ ODP_COMP_HUFFMAN_CODE_DEFAULT = 0,
+ /** use fixed huffman codes */
+ ODP_COMP_HUFFMAN_CODE_FIXED,
+ /** use dynamic huffman coding */
+ ODP_COMP_HUFFMAN_CODE_DYNAMIC,
+} odp_comp_huffman_code_t;
+
+/**
+ * Hash algorithms in a bit field structure
+ *
+ */
+typedef union odp_comp_hash_algos_t {
+ /** hash algorithms */
+ struct {
+ /** ODP_COMP_HASH_ALG_SHA1 */
+ uint32_t sha1 : 1;
+
+ /** ODP_COMP_HASH_ALG_SHA256 */
+ uint32_t sha256 : 1;
+
+ } bit;
+
+ /** All bits of the bit field structure
+ *
+ * This field can be used to set/clear all flags, or bitwise
+ * operations over the entire structure.
+ */
+ uint32_t all_bits;
+} odp_comp_hash_algos_t;
+
+/**
+ * Comp algorithms in a bit field structure
+ *
+ */
+typedef union odp_comp_algos_t {
+ /** Compression algorithms */
+ struct {
+ /** ODP_COMP_ALG_NULL */
+ uint32_t null : 1;
+
+ /** ODP_COMP_ALG_DEFLATE */
+ uint32_t deflate : 1;
+
+ /** ODP_COMP_ALG_ZLIB */
+ uint32_t zlib : 1;
+
+ /** ODP_COMP_ALG_LZS */
+ uint32_t lzs :1;
+ } bit;
+
+ /** All bits of the bit field structure
+ * This field can be used to set/clear all flags, or bitwise
+ * operations over the entire structure.
+ */
+ uint32_t all_bits;
+} odp_comp_algos_t;
+
+/**
+ * Compression Interface Capabilities
+ *
+ */
+typedef struct odp_comp_capability_t {
+ /** Maximum number of sessions */
+ uint32_t max_sessions;
+
+ /** Supported compression algorithms */
+ odp_comp_algos_t comp_algos;
+
+ /** Supported hash algorithms. */
+ odp_comp_hash_algos_t hash_algos;
+
+ /** Support type for synchronous operation mode (ODP_COMP_SYNC).
+ * User should set odp_comp_session_param_t:mode based on
+ * support level as indicated by this param.
+ */
+ odp_support_t sync;
+
+ /** Support type for asynchronous operation mode (ODP_COMP_ASYNC).
+ * User should set odp_comp_session_param_t:mode param based on
+ * support level as indicated by this param.
+ */
+ odp_support_t async;
+} odp_comp_capability_t;
+
+/**
+ * Hash algorithm capabilities
+ *
+ */
+typedef struct odp_comp_hash_alg_capability_t {
+ /** Digest length in bytes */
+ uint32_t digest_len;
+} odp_comp_hash_alg_capability_t;
+
+/**
+ * Compression algorithm capabilities structure for each algorithm.
+ *
+ */
+typedef struct odp_comp_alg_capability_t {
+ /** Enumeration indicating algorithm support for dictionary load */
+ odp_support_t support_dict;
+
+ /** Optional Maximum length of dictionary supported
+ * by implementation of an algorithm.
+ *
+ * Invalid if support_dict == ODP_SUPPORT_NO.
+ *
+ * Implementation use dictionary of length less than or equal to value
+ * indicated by dict_len. if set to 0 and if support_dict ==
+ * ODP_SUPPORT_YES, then implementation will use dictionary length
+ * less than or equal to user input length in odp_comp_set_dict()
+ * and update used dictionary length at output of the call.
+ *
+ */
+ uint32_t dict_len;
+
+ /** Maximum compression level supported by implementation of this algo.
+ * Indicates number of compression levels supported by implementation,
+ *
+ * where,
+ *
+ * 1 means fastest compression i.e. output produced at
+ * best possible speed at the expense of compression quality, and
+ *
+ * max_level means best compression i.e.output produced is best possible
+ * compressed content at the expense of speed.
+ *
+ * Example, if max_level = 4 , it means algorithm supports four levels
+ * of compression from value 1 up to 4. User can set this value from
+ * 1 (fastest compression) to 4 (best compression).
+ * See RFC1950 for an example explanation to level.
+ *
+ * Value 0 mean implementation use its default value.
+ *
+ */
+ uint32_t max_level;
+
+ /* Supported hash algorithms */
+ odp_comp_hash_algos_t hash_algo;
+} odp_comp_alg_capability_t;
+
+/**
+ * Comp API dictionary type
+ * Consists of pointer to byte buffer. length of dictionary
+ * indicated by length parameter.
+ */
+typedef struct odp_comp_dict_t {
+ /** pointer to byte array */
+ uint8_t *buf;
+ /** length of the dictionary. */
+ uint32_t len;
+} odp_comp_dict_t;
+
+/**
+ * Comp API algorithm specific parameters
+ *
+ */
+typedef struct odp_comp_algo_param_t {
+ /** struct for defining deflate algorithm parameters.
+ * Also initialized by other deflate based algorithms , ex. ZLIB
+ */
+ struct comp_alg_def_param {
Comment:
odp_comp_alg_deflate_param, please.
> Dmitry Eremin-Solenikov(lumag) wrote:
> Please check the see list. It mentions non-existing functions.
>> Dmitry Eremin-Solenikov(lumag) wrote:
>> no result here
>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>> s/Else/Otherwise/
>>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>>> ... an error....
>>>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>>>> ... with valid pkt_out and pkt_in being ODP_PACKET_INVALID...
>>>>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>>>>> It is an error to call this api when session was created in
>>>>>> ODP_COMP_ASYNC mode.
>>>>>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>>>>>> As said, single and multi versions are possible, but not as proposed in
>>>>>>> this patch. Both versions should have the same param structure and
>>>>>>> specification. Only difference would be pkt_in[] vs pkt_in, pkt_out[]
>>>>>>> vs pkt_out, param[] vs. param ...
>>>>>>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>>>>>>> Then I propose to add a new API like
>>>>>>>>
>>>>>>>> odp_comp_compress_multi(const odp_packet_t pkt_in[], odp_packet_t
>>>>>>>> pkt_out[], const odp_comp_compress_param_t param[], int num_pkt);
>>>>>>>>
>>>>>>>> which takes of handling multiple packets and retain current version
>>>>>>>> for single packet handling.
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> Shally
>>>>>>>> @bala-manoharan
>>>>>>>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>>>>>>>> Results for both sync and async through result function:
>>>>>>>>>
>>>>>>>>> int odp_comp_result(odp_comp_packet_result_t *result, odp_packet_t
>>>>>>>>> packet);
>>>>>>>>>
>>>>>>>>> OR have the results as output parameter. Results function is needed
>>>>>>>>> any way for the async operation.
>>>>>>>>>> Dmitry Eremin-Solenikov(lumag) wrote:
>>>>>>>>>> int odp_comp_compress(const odp_packet_t pkt_in[], odp_packet_t
>>>>>>>>>> pkt_out[], const odp_comp_compress_param_t param[], int num_pkt);
>>>>>>>>>>
>>>>>>>>>> Single packet version may be also added, but is not necessary since
>>>>>>>>>> couple of additional if-clauses does not significant overhead when
>>>>>>>>>> compare CPU cycles of the entire comp operation.
>>>>>>>>>>
>>>>>>>>>> int odp_comp_compress_single(odp_packet_t pkt_in, odp_packet_t
>>>>>>>>>> pkt_out, const odp_comp_compress_param_t param);
>>>>>>>>>>
>>>>>>>>>> The two prototypes would be the same except [] and num_pkt.
>>>>>>>>>>
https://github.com/Linaro/odp/pull/156#discussion_r136958336
updated_at 2017-09-05 11:18:30
