Petri Savolainen(psavol) replied on github web page:
include/odp/api/spec/comp.h
line 512
@@ -0,0 +1,873 @@
+/* Copyright (c) 2017, Linaro Limited
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file
+ *
+ * ODP Compression
+ */
+
+#ifndef ODP_API_COMP_H_
+#define ODP_API_COMP_H_
+
+#include <odp/visibility_begin.h>
+#include <odp/api/support.h>
+#include <odp/api/packet.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @defgroup odp_compression ODP COMP
+ * ODP Compression is an API set to do compression+hash or decompression+hash
+ * operations on data. Hash is calculated on plaintext.
+ *
+ * if opcode = ODP_COMP_COMPRESS, then it will apply hash and then compress,
+ * if opcode = ODP_COMP_DECOMPRESS, then it will decompress and then apply
+ * hash.
+ * Independent hash-only operations are not supported. Implementation should
+ * perform hash along with valid compression algo.
+ * Macros, enums, types and operations to utilize compression interface.
+ * @{
+ */
+
+/**
+ * @def ODP_COMP_SESSION_INVALID
+ * Invalid session handle
+ */
+
+/**
+ * @typedef odp_comp_session_t
+ * Compression/Decompression session handle
+ */
+
+/**
+ * Compression API operation mode
+ */
+typedef enum {
+ /** Synchronous, return results immediately */
+ ODP_COMP_SYNC,
+ /** Asynchronous, return results via event queue */
+ ODP_COMP_ASYNC
+} odp_comp_op_mode_t;
+
+/**
+ * Comp API operation type.
+ *
+ */
+typedef enum {
+ /** Compress */
+ ODP_COMP_OP_COMPRESS,
+ /** Decompress */
+ ODP_COMP_OP_DECOMPRESS
+} odp_comp_op_t;
+
+/**
+ * Comp API hash algorithm
+ *
+ */
+typedef enum {
+ /** ODP_COMP_HASH_ALG_NONE - No hash algorithm selected. */
+ ODP_COMP_HASH_ALG_NONE,
+ /** ODP_COMP_HASH_ALG_SHA1 - SHA-1 hash algorithm. */
+ ODP_COMP_HASH_ALG_SHA1,
+ /** ODP_COMP_HASH_ALG_SHA256 - SHA-2 hash algorithm
+ * 256-bit digest length.
+ */
+ ODP_COMP_HASH_ALG_SHA256
+} odp_comp_hash_alg_t;
+
+/**
+ * Comp API compression algorithm
+ *
+ */
+typedef enum {
+ /** No algorithm specified.
+ * Means no compression, output == input.
+ * if provided, no operation (compression/decompression or hash)
+ * applied on input. Added for testing purpose.
+ */
+ ODP_COMP_ALG_NULL,
+ /** DEFLATE - RFC1951 */
+ ODP_COMP_ALG_DEFLATE,
+ /** ZLIB - RFC1950 */
+ ODP_COMP_ALG_ZLIB,
+ /** LZS */
+ ODP_COMP_ALG_LZS
+} odp_comp_alg_t;
+
+/**
+ * Comp API session creation return code
+ *
+ */
+typedef enum {
+ /** Session created */
+ ODP_COMP_SES_CREATE_ERR_NONE,
+ /** Creation failed, no resources */
+ ODP_COMP_SES_CREATE_ERR_ENOMEM,
+ /** Creation failed, bad compression params */
+ ODP_COMP_SES_CREATE_ERR_INV_COMP,
+ /** Creation failed, bad hash params */
+ ODP_COMP_SES_CREATE_ERR_INV_HASH,
+ /** Creation failed,requested configuration not supported*/
+ ODP_COMP_SES_CREATE_ERR_NOT_SUPPORTED
+} odp_comp_ses_create_err_t;
+
+/**
+ * Comp API operation return codes
+ *
+ */
+typedef enum {
+ /** Operation completed successfully*/
+ ODP_COMP_ERR_NONE,
+ /** Operation paused due to insufficient output buffer.
+ *
+ * This is not an error condition. On seeing this situation,
+ * Implementation should maintain context of in-progress operation and
+ * application should call packet processing API again with valid
+ * output buffer but no other alteration to operation params
+ * (odp_comp_op_param_t).
+ *
+ * if using async mode, application should either make sure to
+ * provide sufficient output buffer size OR maintain relevant
+ * context (or ordering) information with respect to each input packet
+ * en-queued for processing.
+ *
+ */
+ ODP_COMP_ERR_OUT_OF_SPACE,
+ /** Invalid user data pointers */
+ ODP_COMP_ERR_DATA_PTR,
+ /** Invalid input data size */
+ ODP_COMP_ERR_DATA_SIZE,
+ /** Compression Algo failure */
+ ODP_COMP_ERR_ALGO_FAIL,
+ /** Error if operation has been requested in an invalid state */
+ ODP_COMP_ERR_INV_STATE,
+ /** Error if API does not support any of the operational parameter. */
+ ODP_COMP_ERR_NOT_SUPPORTED,
+ /** Error if session is invalid. */
+ ODP_COMP_ERR_INV_SESS
+} odp_comp_err_t;
+
+/**
+ * Comp API enumeration for preferred compression level/speed. Applicable
+ * only for compression operation not decompression.
+ * Value provided defines a trade-off between speed and compression ratio.
+ *
+ * If compression level == ODP_COMP_LEVEL_MIN, output will be produced at
+ * fastest possible rate,
+ *
+ * If compression level == ODP_COMP_LEVEL_MAX, output will be highest possible
+ * compression,
+ *
+ * compression level == ODP_COMP_LEVEL_DEFAULT means implementation will use
+ * its default choice of compression level.
+ *
+ */
+typedef enum {
+ /* Use implementation default */
+ ODP_COMP_LEVEL_DEFAULT = 0,
+ /** Minimum compression (fastest in speed) */
+ ODP_COMP_LEVEL_MIN,
+ /** Maximum compression (slowest in speed) */
+ ODP_COMP_LEVEL_MAX,
+} odp_comp_level_t;
+
+/**
+ * Comp API enumeration for huffman encoding. Valid for compression operation.
+ *
+ */
+typedef enum {
+ /** use implementation default to choose between compression codes */
+ ODP_COMP_HUFFMAN_CODE_DEFAULT = 0,
+ /** use fixed huffman codes */
+ ODP_COMP_HUFFMAN_CODE_FIXED,
+ /** use dynamic huffman coding */
+ ODP_COMP_HUFFMAN_CODE_DYNAMIC,
+} odp_comp_huffman_code_t;
+
+/**
+ * Hash algorithms in a bit field structure
+ *
+ */
+typedef union odp_comp_hash_algos_t {
+ /** hash algorithms */
+ struct {
+ /** ODP_COMP_HASH_ALG_SHA1 */
+ uint32_t sha1 : 1;
+
+ /** ODP_COMP_HASH_ALG_SHA256 */
+ uint32_t sha256 : 1;
+
+ } bit;
+
+ /** All bits of the bit field structure
+ *
+ * This field can be used to set/clear all flags, or bitwise
+ * operations over the entire structure.
+ */
+ uint32_t all_bits;
+} odp_comp_hash_algos_t;
+
+/**
+ * Comp algorithms in a bit field structure
+ *
+ */
+typedef union odp_comp_algos_t {
+ /** Compression algorithms */
+ struct {
+ /** ODP_COMP_ALG_NULL */
+ uint32_t null : 1;
+
+ /** ODP_COMP_ALG_DEFLATE */
+ uint32_t deflate : 1;
+
+ /** ODP_COMP_ALG_ZLIB */
+ uint32_t zlib : 1;
+
+ /** ODP_COMP_ALG_LZS */
+ uint32_t lzs :1;
+ } bit;
+
+ /** All bits of the bit field structure
+ * This field can be used to set/clear all flags, or bitwise
+ * operations over the entire structure.
+ */
+ uint32_t all_bits;
+} odp_comp_algos_t;
+
+/**
+ * Compression Interface Capabilities
+ *
+ */
+typedef struct odp_comp_capability_t {
+ /** Maximum number of sessions */
+ uint32_t max_sessions;
+
+ /** Supported compression algorithms */
+ odp_comp_algos_t comp_algos;
+
+ /** Supported hash algorithms. */
+ odp_comp_hash_algos_t hash_algos;
+
+ /** Support type for synchronous operation mode (ODP_COMP_SYNC).
+ * User should set odp_comp_session_param_t:mode based on
+ * support level as indicated by this param.
+ */
+ odp_support_t sync;
+
+ /** Support type for asynchronous operation mode (ODP_COMP_ASYNC).
+ * User should set odp_comp_session_param_t:mode param based on
+ * support level as indicated by this param.
+ */
+ odp_support_t async;
+} odp_comp_capability_t;
+
+/**
+ * Hash algorithm capabilities
+ *
+ */
+typedef struct odp_comp_hash_alg_capability_t {
+ /** Digest length in bytes */
+ uint32_t digest_len;
+} odp_comp_hash_alg_capability_t;
+
+/**
+ * Compression algorithm capabilities structure for each algorithm.
+ *
+ */
+typedef struct odp_comp_alg_capability_t {
+ /** Enumeration indicating algorithm support for dictionary load */
+ odp_support_t support_dict;
+
+ /** Optional Maximum length of dictionary supported
+ * by implementation of an algorithm.
+ *
+ * Invalid if support_dict == ODP_SUPPORT_NO.
+ *
+ * Implementation use dictionary of length less than or equal to value
+ * indicated by dict_len. if set to 0 and if support_dict ==
+ * ODP_SUPPORT_YES, then implementation will use dictionary length
+ * less than or equal to user input length in odp_comp_set_dict()
+ * and update used dictionary length at output of the call.
+ *
+ */
+ uint32_t dict_len;
+
+ /** Maximum compression level supported by implementation of this algo.
+ * Indicates number of compression levels supported by implementation,
+ *
+ * where,
+ *
+ * 1 means fastest compression i.e. output produced at
+ * best possible speed at the expense of compression quality, and
+ *
+ * max_level means best compression i.e.output produced is best possible
+ * compressed content at the expense of speed.
+ *
+ * Example, if max_level = 4 , it means algorithm supports four levels
+ * of compression from value 1 up to 4. User can set this value from
+ * 1 (fastest compression) to 4 (best compression).
+ * See RFC1950 for an example explanation to level.
+ *
+ * Value 0 mean implementation use its default value.
+ *
+ */
+ uint32_t max_level;
+
+ /* Supported hash algorithms */
+ odp_comp_hash_algos_t hash_algo;
+} odp_comp_alg_capability_t;
+
+/**
+ * Comp API dictionary type
+ * Consists of pointer to byte buffer. length of dictionary
+ * indicated by length parameter.
+ */
+typedef struct odp_comp_dict_t {
+ /** pointer to byte array */
+ uint8_t *buf;
+ /** length of the dictionary. */
+ uint32_t len;
+} odp_comp_dict_t;
+
+/**
+ * Comp API algorithm specific parameters
+ *
+ */
+typedef struct odp_comp_algo_param_t {
+ /** struct for defining deflate algorithm parameters.
+ * Also initialized by other deflate based algorithms , ex. ZLIB
+ */
+ struct comp_alg_def_param {
+ /** compression level where
+ * ODP_COMP_LEVEL_MIN <= level <= ODP_COMP_LEVEL_MAX
+ */
+ odp_comp_level_t level;
+ /** huffman code to use */
+ odp_comp_huffman_code_t comp_code;
+ } deflate;
+
+ /** struct for defining zlib algorithm parameters.
+ */
+ struct comp_alg_zlib_param {
+ /** deflate algo params */
+ struct comp_alg_def_param def;
+ } zlib;
+} odp_comp_alg_param_t;
+
+ /**
+ * Comp API session creation parameters
+ *
+ */
+typedef struct odp_comp_session_param_t {
+ /** Compress vs. Decompress operation */
+ odp_comp_op_t op;
+
+ /** Sync vs Async mode
+ *
+ * When mode = ODP_COMP_SYNC, odp_comp_xxx()
+ * should be called.
+ *
+ * When mode = ODP_COMP_ASYNC, odp_comp_xxx_enq()
+ * should be called.
+ *
+ * Use odp_comp_capability() for supported mode.
+ *
+ */
+ odp_comp_op_mode_t mode;
+
+ /** Compression algorithm
+ *
+ * Use odp_comp_capability() for supported algorithms.
+ */
+ odp_comp_alg_t comp_algo;
+
+ /** Hash algorithm
+ *
+ * Use odp_comp_alg_capability() for supported hash algo for
+ * compression algo given as comp_alg. Implementation should not
+ * support hash only operation on data. output should always contain
+ * data + hash.
+ *
+ */
+ odp_comp_hash_alg_t hash_algo;
+
+ /** parameters specific to compression */
+ odp_comp_alg_param_t algo_param;
+
+ /** Async mode completion event queue
+ *
+ * When mode = ODP_COMP_ASYNC, user should wait on ODP_EVENT_PACKET
+ * with subtype ODP_EVENT_PACKET_COMP on this queue.
+ *
+ * By default, implementation enques completion events in-order-of
+ * request submission and thus queue is considered ordered.
+ *
+ * Please note, behavior could be changed or enhanced
+ * to queue event in-order-of their completion to enable
+ * performance-oriented application to leverage hw offered parallelism.
+ * However, this will be subject to application requirement and more
+ * explicit defined use-case.
+ *
+ */
+ odp_queue_t compl_queue;
+} odp_comp_session_param_t;
+
+/**
+ * Comp API per packet operation result
+ *
+ */
+typedef struct odp_comp_packet_op_result_t {
+ /** Operation Return Code */
+ odp_comp_err_t err;
+
+ /** Output packet data range. Where,
+ *
+ * offset = base offset within packet, current data is written at.
+ *
+ * length = length of data written.
+ *
+ */
+ odp_packet_data_range_t out_data_range;
+} odp_comp_packet_op_result_t;
+
+/**
+ * Comp packet API per packet operation parameters
+ */
+typedef struct odp_comp_packet_op_param_t {
+ /** Session handle from creation */
+ odp_comp_session_t session;
+
+ /** Boolean indicating if current input is last chunk of data, where
+ *
+ * true : last chunk
+ *
+ * false: more to follow
+ *
+ * If set to true, indicates this is the last chunk of
+ * data. After processing of last chunk of data is complete i.e.
+ * call returned with any error code except ODP_COMP_ERR_OUT_OF_SPACE,
+ * implementation should move algorithm to stateless mode
+ * for next of batch of operation i.e. reset history,
+ * insert 'End of Block' marker into compressed data stream(if
+ * supported by algo).See deflate/zlib for interpretation of
+ * stateless/stateful.
+ *
+ * For stateless compressions (ex ipcomp), last should be set to 'true'
+ * for every input packet processing call.
+ *
+ * For compression + hash, digest will be available after
+ * last chunk is processed completely. In case of
+ * ODP_COMP_ERR_OUT_OF_SPACE, application should keep on calling
+ * odp_comp_xxx() API with more output buffer unless call returns
+ * with ODP_COMP_ERR_NONE or other failure code except
+ * ODP_COMP_ERR_OUT_OF_SPACE.
+ */
+ odp_bool_t last;
+
+ /** Input data range to process */
+ odp_packet_data_range_t in_data_range;
+
+ /** Output packet data range.
+ * Indicates where processed packet will be written
+ * where length specifies,
+ * length of available packet buffer at input, and
+ * length of data written at output
+ */
+ odp_packet_data_range_t out_data_range;
+} odp_comp_packet_op_param_t;
+
+/**
+ * Query comp capabilities
+ *
+ * Output comp capabilities on success.
+ *
+ * @param[out] capa Pointer to capability structure for output
+ *
+ * @retval 0 on success
+ * @retval <0 on failure
+ */
+int odp_comp_capability(odp_comp_capability_t *capa);
+
+/**
+ * Query supported compression algorithm capabilities
+ *
+ * Output algorithm capabilities.
+ *
+ * @param comp Compression algorithm
+ * @param[out] capa Array of capability structures for output
+ * @param num Maximum number of capability structures to output
+ *
+ * @return Number of capability structures for the algorithm. If this is larger
+ * than 'num', only 'num' first structures were output and application
+ * may call the function again with a larger value of 'num'.
+ * @retval <0 on failure
+ */
+int odp_comp_alg_capability(odp_comp_alg_t comp,
+ odp_comp_alg_capability_t capa[], int num);
+
Comment:
Is array of capabilities needed with comp algorithms? It would be needed if
user would need to select between multiple discrete options - e.g. if only some
dict_len values would make sense (1kB, 4kB, 16kB), but nothing in between.
> Petri Savolainen(psavol) wrote:
> "where length specifies,
> length of available packet buffer at input, and
> length of data written at output"
>
> This specification should be clarified. "Input" refers refers to
> out_data_range.length as operation input param and "output" refers to the
> same as operation output parameter.
>
> In addition to length, offset may be updated at operation output (at least
> when new packet was allocated). That should be mentioned also.
>> Petri Savolainen(psavol) wrote:
>> This last chuck:
>> "In case of
>> ODP_COMP_ERR_OUT_OF_SPACE, application should keep on calling
>> odp_comp_xxx() API with more output buffer unless call returns
>> with ODP_COMP_ERR_NONE or other failure code except
>> ODP_COMP_ERR_OUT_OF_SPACE. "
>>
>> Documents operation return / error codes rather than "last" field usage. So,
>> I'd remove it from here.
>>> Petri Savolainen(psavol) wrote:
>>> If only option for a stateless algorithm is true, then we should document
>>> that the value is ignored.
>>>> Petri Savolainen(psavol) wrote:
>>>> Typo: "enques" -> enqueues"
>>>>> Petri Savolainen(psavol) wrote:
>>>>> Remove this block text since it's speculation of what could be specified.
>>>>>> Petri Savolainen(psavol) wrote:
>>>>>> Typo: "... given as comp_alg" -> "... given as comp_algo"
>>>>>>
>>>>>> There are two SHOULDs, but I think those are not needed:
>>>>>> 1) comp_algo is always set. It should be e.g. ALG_NULL by default. We
>>>>>> have defined that NULL does not have hash capability. It would be also
>>>>>> possible to leave NULL + hash to be implementation defined capability.
>>>>>> When we say that ALG_NULL is only for test, it should be enough to
>>>>>> discourage people from misusing this API for hashing.
>>>>>> 2) What this means: "output should always contain data + hash" ? If we
>>>>>> enable hashing, hash is always calculated. It's not optional for
>>>>>> implementation to calculate it - right.
>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>> Field name should match the type == "hash_algos" (many algorithms in a
>>>>>>> bit field). Underneath "hash_algo" is used with enum
>>>>>>> odp_comp_hash_alg_t (one algo).
>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>> I did comment the same a month back:
>>>>>>>>
>>>>>>>> Is the data input only? If it is, then this should be "const uint8_t
>>>>>>>> *buf"
>>>>>>>>
>>>>>>>> What is expected about the format of the data? Null terminated
>>>>>>>> strings? If it's strings, then e.g. "const char *str" would be better.
>>>>>>>>
>>>>>>>> Also the type documentation should be updated:
>>>>>>>> * This is not dictionary type, but pointer into dictionary data -
>>>>>>>> right?
>>>>>>>> * "Consists of pointer to byte buffer. length of dictionary indicated
>>>>>>>> by length parameter. ", this needs clarification. What is expected
>>>>>>>> about the data behind the pointer?
>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>> @psavol Hmm. I thought that the user should use this value. And
>>>>>>>>> `odp_comp_level_t` should be dropped from the spec.
>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>> How this relates to odp_comp_level_t enumeration ? Shouldn't user
>>>>>>>>>> use those levels and not a number from 0 to this one ?
>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>> This is description of how de/-compression operation work. This
>>>>>>>>>>> should be specified at operation documentation, and optimally only
>>>>>>>>>>> there. Otherwise, we are in danger of this spec getting deprecated
>>>>>>>>>>> (== in conflict with operation documentation) without noticing.
>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>> True, all types need to be odp_ prefixed. Also this type would be
>>>>>>>>>>>> better to typedef and pull out (from inside of algo_param_t) since
>>>>>>>>>>>> it's used in two places already.
>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>> As a side note: it might be logical, we might want to add
>>>>>>>>>>>>> `odp_support_t` field to notify user if implementation supports
>>>>>>>>>>>>> stateful compression. I can easily assume that there might be
>>>>>>>>>>>>> implementations implementing only stateless compression.
>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>> odp_comp_alg_deflate_param, please.
>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>> Please check the see list. It mentions non-existing functions.
>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>> no result here
>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>> s/Else/Otherwise/
>>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>>> ... an error....
>>>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>>>> ... with valid pkt_out and pkt_in being
>>>>>>>>>>>>>>>>>>> ODP_PACKET_INVALID...
>>>>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>>>>> It is an error to call this api when session was created
>>>>>>>>>>>>>>>>>>>> in ODP_COMP_ASYNC mode.
>>>>>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>>>>>> As said, single and multi versions are possible, but not
>>>>>>>>>>>>>>>>>>>>> as proposed in this patch. Both versions should have the
>>>>>>>>>>>>>>>>>>>>> same param structure and specification. Only difference
>>>>>>>>>>>>>>>>>>>>> would be pkt_in[] vs pkt_in, pkt_out[] vs pkt_out,
>>>>>>>>>>>>>>>>>>>>> param[] vs. param ...
>>>>>>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>>>>>>> Then I propose to add a new API like
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> odp_comp_compress_multi(const odp_packet_t pkt_in[],
>>>>>>>>>>>>>>>>>>>>>> odp_packet_t pkt_out[], const odp_comp_compress_param_t
>>>>>>>>>>>>>>>>>>>>>> param[], int num_pkt);
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> which takes of handling multiple packets and retain
>>>>>>>>>>>>>>>>>>>>>> current version for single packet handling.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Shally
>>>>>>>>>>>>>>>>>>>>>> @bala-manoharan
>>>>>>>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>>>>>>>> Results for both sync and async through result function:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> int odp_comp_result(odp_comp_packet_result_t *result,
>>>>>>>>>>>>>>>>>>>>>>> odp_packet_t packet);
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> OR have the results as output parameter. Results
>>>>>>>>>>>>>>>>>>>>>>> function is needed any way for the async operation.
>>>>>>>>>>>>>>>>>>>>>>>> Petri Savolainen(psavol) wrote:
>>>>>>>>>>>>>>>>>>>>>>>> int odp_comp_compress(const odp_packet_t pkt_in[],
>>>>>>>>>>>>>>>>>>>>>>>> odp_packet_t pkt_out[], const
>>>>>>>>>>>>>>>>>>>>>>>> odp_comp_compress_param_t param[], int num_pkt);
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Single packet version may be also added, but is not
>>>>>>>>>>>>>>>>>>>>>>>> necessary since couple of additional if-clauses does
>>>>>>>>>>>>>>>>>>>>>>>> not significant overhead when compare CPU cycles of
>>>>>>>>>>>>>>>>>>>>>>>> the entire comp operation.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> int odp_comp_compress_single(odp_packet_t pkt_in,
>>>>>>>>>>>>>>>>>>>>>>>> odp_packet_t pkt_out, const odp_comp_compress_param_t
>>>>>>>>>>>>>>>>>>>>>>>> param);
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> The two prototypes would be the same except [] and
>>>>>>>>>>>>>>>>>>>>>>>> num_pkt.
>>>>>>>>>>>>>>>>>>>>>>>>
https://github.com/Linaro/odp/pull/156#discussion_r137524166
updated_at 2017-09-07 12:25:59
