Andreas Pettersson wrote:
> root wrote:
> >
> > Andreas Pettersson wrote:
> >
> > > Hej!
> > >
> > > Samba fungerar fint nu... men jag har fortfarande tv� problem kvar.
> > >
> > > Vid uppstart f�r jag ett meddelande om att st�d f�r "fs type devpts"
> > > saknas, har jag gl�mt att kompliera in n�t i k�rnan? Vad?
> > >
> > > Ett annat problem �r att inte X startar. Jag f�r f�ljande meddelande:
> > >
> > > _XSERVTransSocketOpen: socket() failed for local
> > > _XSERVTransSocketOpenCOTSServer: Unable to open socket for local
> > > _XSERVTransOpen: transport open failed for local/server.pettersson.se:0
> > > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for local
> > > _X11TransSocketOpen: socket() failed for local
> > > _X11TransSocketOpenCOTSClient: Unable to open socket for local
> > > _X11TransOpen: transport open failed for local/server.pettersson.se:0
> > >
> > > waiting for X server to begin accepting connections
> > > XFree86 Version 3.3.5 / X Window System
> > > (protocol Version 11, revision 0, vendor release 6300)
> > > Release Date: August 23 1999
> > > If the server is older than 6-12 months, or if your card is
> > > newer
> > > than the above date, look for a newer version before reporting
> > > problems. (see http://www.XFree86.Org/FAQ)
> > > Operating System: Linux 2.2.5-22smp i686 [ELF]
> > > Configured drivers:
> > > S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
> > > newmmio, mmio_928, s3_generic
> > > (using VT number 7)
> > >
> > > XF86Config: /usr/X11R6/lib/X11/XF86Config
> > > (**) stands for supplied, (--) stands for probed/default values
> > > (**) XKB: keycodes: "xfree86"
> > > (**) XKB: types: "default"
> > > (**) XKB: compat: "default"
> > > (**) XKB: symbols: "us(pc101)"
> > > (**) XKB: geometry: "pc"
> > > (**) XKB: rules: "xfree86"
> > > (**) XKB: model: "pc101"
> > > (**) XKB: layout: "se"
> > > (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
> > > (**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
> > > (**) S3: Graphics device ID: "S3 Inc.|86c764/765 [Trio32/64/64V+]"
> > > (**) S3: Monitor ID: "My Monitor"
> > > (--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
> > > (--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
> > > (--) S3: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
> > > (--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
> > > (--) S3: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
> > > (--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
> > > (--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
> > > (--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
> > > (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
> > > (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
> > > (--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
> > > (--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
> > > (--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
> > > (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
> > > (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
> > > (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
> > > (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
> > > (--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
> > > (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> > > (--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> > > (--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> > > (--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> > > (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> > > (--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> > > (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> > > (--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> > > (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> > > (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> > > (--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> > > (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> > > (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> > > (--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> > > (--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> > > (--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> > > (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> > > (--) S3: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
> > > (--) S3: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
> > > (--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
> > > (--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
> > > (--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
> > > (--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
> > > (--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
> > > (--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
> > > (--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
> > > (--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
> > > (**) FontPath set to "unix/:-1"
> > > (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xe0000000
> > > (--) S3: chipset: Trio64V+ rev. 54
> > > (--) S3: chipset driver: newmmio
> > > (--) S3: card type: PCI
> > > (--) S3: videoram: 2048k
> > > (--) S3: Ramdac type: s3_trio64
> > > (--) S3: Ramdac speed: 135 MHz
> > > (--) S3: Using Trio32/64 programmable clock (MCLK 59.957 MHz)
> > > (--) S3: Maximum allowed dot-clock: 135.000 MHz
> > > (**) S3: Mode "640x480": mode clock = 25.175
> > > (--) S3: Using 6 bits per RGB value
> > > (--) S3: Virtual resolution set to 640x480
> > > (--) S3: Local bus LAW is 0xE0000000
> > > (--) S3: Using a banksize of 2048k, line width of 640
> > > (--) S3: Using a single 64x64 area at (576,482) for expanding pixmaps
> > > (--) S3: Using 8 planes of 640x2730 at (0,546) aligned 8 as font cache
> > > ._FontTransSocketOpen: socket() failed for unix
> > > _FontTransSocketOpenCOTSClient: Unable to open socket for unix
> > > _FontTransOpen: transport open failed for unix/server.pettersson.se:-1
> > > failed to set default font path 'unix/:-1'
> > > Fatal server error:
> > > could not open default font 'fixed'
> > >
> > > When reporting a problem related to a server crash, please send
> > > the full server output, not just the last messages
> > >
> > > _X11TransSocketOpen: socket() failed for local
> > > _X11TransSocketOpenCOTSClient: Unable to open socket for local
> > > _X11TransOpen: transport open failed for local/server.pettersson.se:0
> > > ..
> > > _X11TransSocketOpen: socket() failed for local
> > > _X11TransSocketOpenCOTSClient: Unable to open socket for local
> > > _X11TransOpen: transport open failed for local/server.pettersson.se:0
> > > giving up.
> > > xinit: Invalid argument (errno 22): unable to connect to X server
> > > xinit: No such process (errno 3): Server error.
> > >
> > > Jag k�r RedHat 6.1 med kernel 2.2.12 och S3Trio64V+ grafikkort
> > >
> > > Hoppas n�n kan hj�lpa mig!
> > >
> > > H�lsninar
> > > ANDREAS
> > >
> > > ======Annons================================================
> > > === V�rldens minsta Linux workstation?
> > > === Nu med Linux DeLuxe V6.5 http://www.svithiod.com
> > > ============================================================
> >
> > Ojoj, det d�r problemet fick jag ocks�, fast med 2.2.13 k�rnan, men jag
> > hade redan s� mycket kr�ngel, s� jag installerade bara om allt, det
> > konstiga med det d�r var v�l �nd� det att om jag startade med min gamla
> > kernel s� funkade det.
>
> M�ste allts� betyda att vi gl�mt att kompilera in st�d f�r n�got i
> k�rnan, men vad?
>
> >
> > Mikael Jacobson
> >
> > ======Annons================================================
> > === V�rldens minsta Linux workstation?
> > === Nu med Linux DeLuxe V6.5 http://www.svithiod.com
> > ============================================================
>
> ======Annons================================================
> === V�rldens minsta Linux workstation?
> === Nu med Linux DeLuxe V6.5 http://www.svithiod.com
> ============================================================
Ingen aning, n�n sa n�t om Unix domain sockets, men det hade jag med (fast jag
kompilerade iof in st�d f�r vfat i min k�rna men int' fan kunde jag komma �t
min windos partition)
Mikael Jacobson
======Annons================================================
=== V�rldens minsta Linux workstation?
=== Nu med Linux DeLuxe V6.5 http://www.svithiod.com
============================================================
