buenaass
si te sirve te mando info de mis discos>
[EMAIL PROTECTED]:~# hdparm -i /dev/hdc
/dev/hdc:
Model=ST310211A, FwRev=3.54, SerialNo=5DB05TH4
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=1024kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=19541088
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4
[EMAIL PROTECTED]:~# hdparm -t /dev/hdc1
/dev/hdc1:
Timing buffered disk reads: 64 MB in 3.12 seconds = 20.51 MB/sec
[EMAIL PROTECTED]:~# hdparm -T /dev/hdc1
/dev/hdc1:
Timing buffer-cache reads: 128 MB in 0.65 seconds =196.92 MB/sec
y el otro disco
[EMAIL PROTECTED]:~# hdparm -i /dev/hdd
/dev/hdd:
Model=QUANTUM FIREBALLlct20 20, FwRev=APL.0900, SerialNo=052115750195
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=418kB, MaxMultSect=8, MultSect=8
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39876480
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 1 2 3 4 5
[EMAIL PROTECTED]:~# hdparm -t /dev/hdd
/dev/hdd:
Timing buffered disk reads: 64 MB in 3.12 seconds = 20.51 MB/sec
[EMAIL PROTECTED]:~# hdparm -T /dev/hdd
/dev/hdd:
Timing buffer-cache reads: 128 MB in 0.63 seconds =203.17 MB/sec
capaz sirva,
de paso un pregunta: probaste el slackware 10?? que tal???
salu3
niko
pd. la pc es un athlon xp 2.000+ con 256 mb ram , pero de mhz reales
tiene unos 1200 y tantos...
_______________________________________________
Lista de Correo Lnx-brc
[EMAIL PROTECTED]
http://www.cenitec.com.ar/mailman/listinfo/lnx-brc
Grupo de Ususarios de Linux Bariloche - GULBar - http://www.gulbar.homelinux.org
