Hi Jon,
many thanks for your reactivity.
Robin S wrote: Just in case it matters (especialy since you're using C#,
which is case-sensitive), in your ILog statements, "warn" is lowercase, while
the others are mixed case.
Thank you Robin, but this was just the messages I wrote to the log system
to test my example ;-)
Bruno
Bruker BioSpin GmbH
_____
Bruno Knittel
Automation Development
Bruker BioSpin GmbH
Silberstreifen
76287 Rheinstetten
Germany Phone: +49 721 5161-90064
Fax: +49 721 5161-494
[EMAIL PROTECTED]
www.bruker-biospin.com <http://www.bruker-biospin.com/>
_____
Bruker BioSpin GmbH: Sitz der Gesellschaft/Registered Office: Rheinstetten, HRB
102368 Amtsgericht Mannheim
Geschäftsführer/Managing Directors: Dr. Bernd Gewiese, Dr. Dieter Schmalbein,
Dr. Gerhard Roth
Diese E-Mail und alle Anlagen können Betriebs- oder Geschäftsgeheimnisse, oder
sonstige vertrauliche Informationen enthalten. Sollten Sie diese E-Mail
irrtümlich erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine
Vervielfältigung oder Weitergabe der E-Mail und aller Anlagen ausdrücklich
untersagt. Bitte benachrichtigen Sie den Absender und löschen/vernichten Sie
die empfangene E-Mail und alle Anlagen.
Vielen Dank.
This message and any attachments may contain trade secrets or privileged,
undisclosed or otherwise confidential information. If you have received this
e-mail in error, you are hereby notified that any review, copying or
distribution of it and its attachments is strictly prohibited. Please inform
the sender immediately and delete/destroy the original message and any copies.
Thank you.
-----Ursprüngliche Nachricht-----
Von: Ron Grabowski [mailto:[EMAIL PROTECTED]
Gesendet: Mittwoch, 7. Mai 2008 03:40
An: Log4NET User
Betreff: Re: AW: log4net configuration withtou Xml file
I added an overload to BasicConfigurator that accepts more than one appender so
you don't have to cast down to the Hierarchy and understand what's going on at
that level:
https://issues.apache.org/jira/browse/LOG4NET-153
----- Original Message ----
From: Knittel Bruno <[EMAIL PROTECTED]>
To: Log4NET User <[email protected]>
Sent: Tuesday, May 6, 2008 3:38:15 AM
Subject: AW: log4net configuration withtou Xml file
Hi Everyone,
I finally managed to configure log4net through the code, even using
multiple appenders.
Was not so hard, I just took a look at how the BasicConfigurator,
XmlConfigurator and the units tests were written.
Follows the piece of code I just ran. It creates a ConsoleAppender as well
as a FileAppender.
Hope it can help someone.
Regards,
Bruno
using System;
using System.Collections.Generic;
using System.Windows.Forms;
using log4net;
using log4net.Appender;
using log4net.Repository;
using log4net.Repository.Hierarchy;
namespace log4nettest
{
static class Program
{
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main()
{
ConfigureLog();
ILog lLog = LogManager.GetLogger(typeof(Program));
lLog.Debug("Debug");
lLog.Error("Error");
lLog.Fatal("Fatal");
lLog.Info("Info");
lLog.Warn("warn");
}
private static ConsoleAppender GetConsoleAppender()
{
ConsoleAppender lAppender = new ConsoleAppender();
lAppender.Name = "Console";
lAppender.Layout = new
log4net.Layout.PatternLayout("%date{dd-MM-yyyy HH:mm:ss,fff} %5level [%2thread]
%message (%logger{1}:%line)%n");
lAppender.Threshold = log4net.Core.Level.Error;
lAppender.ActivateOptions();
return lAppender;
}
private static FileAppender GetFileAppender()
{
FileAppender lAppender = new FileAppender();
lAppender.Name = "File";
lAppender.AppendToFile = true;
lAppender.File = "log.txt";
lAppender.Layout = new
log4net.Layout.PatternLayout("%date{dd-MM-yyyy HH:mm:ss,fff} %5level [%2thread]
%message (%logger{1}:%line)%n");
lAppender.Threshold = log4net.Core.Level.All;
lAppender.ActivateOptions();
return lAppender;
}
private static void ConfigureLog()
{
Logger root;
root = ((Hierarchy)LogManager.GetRepository()).Root;
root.AddAppender(GetConsoleAppender());
root.AddAppender(GetFileAppender());
root.Repository.Configured = true;
}
}
}
Bruker BioSpin GmbH
_____
Bruno Knittel
Automation Development
Bruker BioSpin GmbH
Silberstreifen
76287 Rheinstetten
Germany Phone: +49 721 5161-90064
Fax: +49 721 5161-494
[EMAIL PROTECTED]
www.bruker-biospin.com <http://www.bruker-biospin.com/>
_____
Bruker BioSpin GmbH: Sitz der Gesellschaft/Registered Office: Rheinstetten, HRB
102368 Amtsgericht Mannheim
Geschäftsführer/Managing Directors: Dr. Bernd Gewiese, Dr. Dieter Schmalbein,
Dr. Gerhard Roth
Diese E-Mail und alle Anlagen können Betriebs- oder Geschäftsgeheimnisse, oder
sonstige vertrauliche Informationen enthalten. Sollten Sie diese E-Mail
irrtümlich erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine
Vervielfältigung oder Weitergabe der E-Mail und aller Anlagen ausdrücklich
untersagt. Bitte benachrichtigen Sie den Absender und löschen/vernichten Sie
die empfangene E-Mail und alle Anlagen.
Vielen Dank.
This message and any attachments may contain trade secrets or privileged,
undisclosed or otherwise confidential information. If you have received this
e-mail in error, you are hereby notified that any review, copying or
distribution of it and its attachments is strictly prohibited. Please inform
the sender immediately and delete/destroy the original message and any copies.
Thank you.
-----Ursprüngliche Nachricht-----
Von: Radovan Raszka [mailto:[EMAIL PROTECTED]
Gesendet: Dienstag, 6. Mai 2008 08:00
An: Log4NET User
Betreff: RE: log4net configuration withtou Xml file
Hello Bruno,
configuring log4net directly from the code is my dream too, but documentation
did not give any example how to do this.
It is simple if you need to use the only appender - use BasicConfigurator:
log4net.Appender.FileAppender fa = new log4net.Appender.FileAppender();
fa.AppendToFile = false;
fa.File = "ipagent.log";
fa.Layout = new log4net.Layout.PatternLayout("%date{dd-MM-yyyy HH:mm:ss,fff}
%5level [%2thread] %message (%logger{1}:%line)%n");
fa.Threshold = log4net.Core.Level.Debug;
fa.ActivateOptions();
log4net.Config.BasicConfigurator.Configure(fa);
I have this tested and it works well. But when configuration is more complex, I
didn't found a way how to make logging to work. Look at this message
http://www.mail-archive.com/[email protected]/msg03890.html,
there you find a piece of my (nonworking) code.
If you'll be able to find what is missing there, let me know
Radovan Raszka
_____
From: Knittel Bruno [mailto:[EMAIL PROTECTED]
Sent: Monday, May 05, 2008 9:32 AM
To: [email protected]
Subject: log4net configuration withtou Xml file
Hello Everyone,
I need to be able to configure log4net without the XmlConfigurator, that is
directly from my code.
I am aware of the BasicConfigurator but one appender is not enough for me.
I would like to be able to create some new appenders, remove (or disable)
them and change their
log threshold at runtime. I am working under Compact Framework 2.0.
I already took a look at this (
http://www.mail-archive.com/[email protected]/msg02895.html )
mail that gave me many informations,
but did not yet found how to create an appender and register it not for one
logger but for all (and all the ones that will be created after I registered my
appender).
In fact how can I achieve a configuration like the following file but
programmatically:
<configuration>
<log4net>
<appender name="TextLogFileAppender" type="log4net.Appender.FileAppender" >
<file value="log.xml" />
<appendToFile value="true" />
<layout type="log4net.Layout.XmlLayoutSchemaLog4j" />
<param name="Threshold" value="ERROR" />
</appender>
<appender name="ConsoleErrorAppender" type="log4net.Appender.ConsoleAppender">
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level %logger [%ndc]
<%property{auth}> - %message%newline" />
</layout>
<param name="Threshold" value="FATAL" />
</appender>
<appender name="UdpAppender" type="log4net.Appender.UdpAppender">
<localPort value="8080" />
<remoteAddress value="192.168.1.1" />
<remotePort value="8080" />
<layout type="log4net.Layout.XmlLayoutSchemaLog4j">
<locationInfo value="true" />
</layout>
<param name="Threshold" value="DEBUG" />
</appender>
<!-- Setup the root category, add the appenders and set the default level -->
<root>
<appender-ref ref="TextLogFileAppender" />
<appender-ref ref="ConsoleErrorAppender" />
<appender-ref ref="UdpAppender" />
</root>
</log4net>
</configuration>
Best regards and many thanks in advance for any help,
Bruno
