When I tried running my kernel again after my computer restarted, it booted swapfile (RAYS OS).
On 27 September 2010 19:11, 包孟謙 <[email protected]> wrote: > the "error" which causes the reboot is the "Superblock last mount time is > in the future.", which is not actually a serious error but causes the system > to run fsck anyway. > > SE Linux requires a SE Linux enabled kernel, this should not be a serious > problem unless you really cannot live without the added security. > > no suggestions on why /proc seems unavailable, although the check seems > premature if the / is not yet mounted.. (perhaps there is a /proc in > initrd/initramfs? I do not use these and if you compile a kernel yourself I > do not see any reason why you should, either) > > you still did not explain what you mean by "proceeded to swapfile (Rays > OS)" > > > > On Mon, Sep 27, 2010 at 11:52 AM, Herlyn Melicado < > [email protected]> wrote: > >> In photo0102.jpg, I saw "Mount failed for selinuxfs on /selinux: No such >> file or directory" and "cat: /proc/cmdline: No such file or directory" >> >> Before it rebooted, the last output can be seen in photo0103.jpg You can >> see there that it says "fail" >> >> And after I run it again, the output can be seen on Photo0103.jpg where it >> showed that the it activated swapfile. >> >> I am not installing a new OS yet, but I am just trying to test my newly >> built kernel and initramfs which I find to have some issues. >> >> >> On 27 September 2010 17:37, 包孟謙 <[email protected]> wrote: >> >>> except for a system time problem, the screenshots do not indicate any >>> errors or shortcomings.. >>> >>> and what do you mean by "proceeded to swapfile (Rays OS)", you will boot >>> the OS that is indicated with the "root=" parameter. the swap partition >>> might hold resume data if you used suspend-to-disk before, but you will not >>> be able to use that with any other root filesystem than the one it was >>> stored with, i.e. if you enter Rays OS after boot you never installed any >>> other OS in the first place >>> >>> On Mon, Sep 27, 2010 at 11:25 AM, Herlyn Melicado < >>> [email protected]> wrote: >>> >>>> I tried "pmon>g root=/dev/hda1 console=tty" and it did not hang unlike >>>> before but afterwards it rebooted. Then I tried running it again but now it >>>> proceeded to swapfile (Rays OS). >>>> >>>> This is not the result I wanted. >>>> >>>> I also saw some errors. Please see the attached files. >>>> >>>> >>>> On 27 September 2010 16:58, liushiwei <[email protected]> wrote: >>>> >>>>> pmon>g root=/dev/hda1 console=tty >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "loongson-dev" group. >>>>> To post to this group, send email to [email protected]. >>>>> To unsubscribe from this group, send email to >>>>> [email protected]<loongson-dev%[email protected]> >>>>> . >>>>> For more options, visit this group at >>>>> http://groups.google.com/group/loongson-dev?hl=en. >>>>> >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "loongson-dev" group. >>>> To post to this group, send email to [email protected]. >>>> To unsubscribe from this group, send email to >>>> [email protected]<loongson-dev%[email protected]> >>>> . >>>> For more options, visit this group at >>>> http://groups.google.com/group/loongson-dev?hl=en. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "loongson-dev" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]<loongson-dev%[email protected]> >>> . >>> For more options, visit this group at >>> http://groups.google.com/group/loongson-dev?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "loongson-dev" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]<loongson-dev%[email protected]> >> . >> For more options, visit this group at >> http://groups.google.com/group/loongson-dev?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "loongson-dev" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<loongson-dev%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/loongson-dev?hl=en. > -- You received this message because you are subscribed to the Google Groups "loongson-dev" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/loongson-dev?hl=en.
