TheBong Pipe wrote:
<SNIP>
> Third problem: in a 10Mbit link, the transfer rate is about 180Kbyte/s. Is
> it
> normal for a Jetdirect card? Do you think that upgrading to 100Mbit should
> be
> good? Could it be a linux networking problem (the server has two 3com 905
> NICs, one speaking Appletalk, one TCP/IP)?
<SNIP>
Yes, if you're transferring 500MB files to and fro I would definitely
upgrade to 100Mbit - its cheap nowadays, and you'll see a big
performance improvement. 180Kbyte/sec is a little on the slow end for
10MBit, but not unusually so - especially if there is much other traffic
on that network.
--
Jules Agee
System Administrator
Pacific Coast Feather Co.
[EMAIL PROTECTED] x284
-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
