Hi,
I've a second problem with 3.6.17: Running lpd on a system
where the tmp and spool directories are on different partitions,
gives the following "-D 2" output:
----- cut ------------------------------------------------------------
2000-06-20-13:50:40.045 moon [9440] RECV lw-e3-guru-test: Checkwrite: file
'/var/spool/lpd/lw-e3-guru-test/hfA825' fd 7, inode 0x18871, perms 0100600
2000-06-20-13:50:40.051 moon [9440] RECV lw-e3-guru-test: setstatus: msg
'lw-e3-guru-test: Check_for_missing files: error renaming '/tmp/temp09qPaaCs' to
'dfA825andros' - Cross-device link'
2000-06-20-13:50:40.052 moon [9440] RECV lw-e3-guru-test: Trim_status_file: dir
'/var/spool/lpd/lw-e3-guru-test', file 'status.lw-e3-guru-test' max 10, min 0
2000-06-20-13:50:40.053 moon [9440] RECV lw-e3-guru-test: Trim_status_file:
'/var/spool/lpd/lw-e3-guru-test/status.lw-e3-guru-test' max 10, min 0, size 1948
2000-06-20-13:50:40.054 moon [9440] RECV lw-e3-guru-test: Checkwrite: file
'/var/spool/lpd/lw-e3-guru-test/status.lw-e3-guru-test' fd 8, inode 0x18868, perms
0100600
2000-06-20-13:50:40.056 moon [9440] RECV (INFO) lw-e3-guru-test: Check_for_missing
files: error renaming '/tmp/temp09qPaaCs' to 'dfA825andros' - Cross-device link
2000-06-20-13:50:40.082 moon [9440] RECV lw-e3-guru-test: cleanup: signal No signal,
Errorcode 0, exits 1
----- cut ------------------------------------------------------------
With 3.6.12 and the same configuration, it runs fine.
(both versions tested on Solaris 2.7 with binaries compiled on 2.6 if that
matters)
Any ideas?
Thanks,
Robin
--
Robin Sommer * private 05251/65041 * work 05251/60-3322
Univers. of Paderborn * [EMAIL PROTECTED] * [EMAIL PROTECTED]
-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
