[EMAIL PROTECTED] wrote:
> 
> The message works correctly on my HP IVsi, and HP Vsi printers here.
> 
> - Justus
> 

> Subject:  Re: LPRng: Console display ready message on HP LaserJets
> 
> This is cooooolll...
> 
> Yet another behaviour difference.  On my hp8000 it stays on all the
> time.
> 
> Patrick Powell
> 

> > From [EMAIL PROTECTED] Fri Aug  4 09:58:31 2000
> > Date: Fri, 04 Aug 2000 11:46:33 -0400
> > From: "Damian, G. C. (Gerald)" <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: LPRng: Console display ready message on HP LaserJets
> >
> > I recently upgraded to LPRng-3.6.22/ifhp-3.3.19 from LPRng-3.6.18/
> > ifhp-3.3.16 and noticed a change in the way cosole display ready
> > messages are handled.
> >
> > In the older revs PJL was generated displaying the user name. At this
> > rev it's configurable via "pjl_ready_msg" in ifhp.conf. Great! Only
> > problem is I rarely see it...
> >
> > On my LaserJets I now see the "00 READY" instead of username and job
> > as I would expect. I know that the PJL is sent because if I take the
> > printer offline I see my message. However, once I bring it online,
> > the msg is immediately replaced with "00 READY".
> >
> > How can I get the prior behavior?

Thanks for the replies. Yes, it does work as expected. I just happened
to try
it on two "special" HP LJ4ms and couldn't get it to work. Next time I'll
do
a better job of testing before I yell for help...

The first printer is JetDirect attached, but had a "LOW TONER"
condition. 
According to the PJL Tech Ref Manual using RDYMSG will replace the
lowest
priority 00 READY message and will NOT appear until a high priority
condition (such as low toner) is cleared.

The 2nd printer is attached to a Microplex(network printer box). I can
send
jobs fine using ifhp over port 4400, but my RDYMSGs don't get displayed. 
I think this has to do with handshake between the Microplex and the
printer
over the parallel port. This is something that I never tried before, not
something that worked & is now broke. I can live that.

Thanks again!

-- 
Jerry Damian             | Ford Email: [EMAIL PROTECTED]  
Ford Motor Co./RCS Dept. | Internet Email: [EMAIL PROTECTED]          
SRL MD 1074 RM 1116      | ph: (313)32-38347 fax: (313)39-04865      
Dearborn, MI 48121-2053  | my opinions != Ford's opinions or policy

-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body.  For the impatient,
to subscribe to a list with name LIST,  send mail to [EMAIL PROTECTED]
with:                           | example:
subscribe LIST <mailaddr>       |  subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr>     |  unsubscribe lprng [EMAIL PROTECTED]

If you have major problems,  send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------

Reply via email to