Hi Thomas! try ps_eoj_at_start@ in your ifhp.conf. We had the same problem with our Colorlaserjet 8550DN. regards, Klaus Micheler -----Urspr�ngliche Nachricht----- Von: Thomas Emmel [mailto:[EMAIL PROTECTED]] Gesendet am: Dienstag, 29. August 2000 17:10 An: [EMAIL PROTECTED] Betreff: LPRng: Again a Problem with HP2500CM Hello, I have a silly problem with my HP2500CM! It doesn't print if I filter my job with ifhp (3.3.21)! After two hours of work I found the following: If I put the (postscript) job directly to the printer it works but without selecting a tray or anything... If I put it to the filter first ifhp add some header like ^[%-12345X@PJL @PJL JOB NAME = "PID 5067" DISPLAY = "root" @PJL ENTER LANGUAGE = POSTSCRIPT ^D%! <</PostRenderingEnhance true /PostRenderingEnhanceDetails << /PrintQuality 3 /Type 11 >> >> setpagedevice <</MediaType (Tran)>> setpagedevice %!PS-Adobe-2.0 ... The printer receives the file and it seems that it will be printed but after some seconds the READY message reappear and thats all! Next I catched the file and made some changes. The result is: after removing the ^D (CTRL-D) above the file will be printed with the correct tray selected... The funny thing is I can swear that it works fine the last months without this problem :-) My question is: Ist there any switch to remove this CTRL-D remove_ctrl=D doesn't work... Any help suggested with thanks Thomas -- ____________________________________________________________________ Dipl.-Ing. Thomas Emmel TU Darmstadt: Inst. f. Mechanik (FB6) AG IV Hochschulstr. 1, 64289 Darmstadt Tel.: +49 (6151) 16 49 66, FAX: +49 (6151) 16 30 18 e-mail: [EMAIL PROTECTED] www : http://coulomb.mechanik.tu-darmstadt.de/user/emmel ____________________________________________________________________ ---------------------------------------------------------------------------- - If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. ---------------------------------------------------------------------------- - ----------------------------------------------------------------------------- If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
AW: LPRng: Again a Problem with HP2500CM
Micheler Klaus (MDCA Villach) Tue, 29 Aug 2000 10:23:46 -0700
