I have a similar (the same) problem when I ugraded *LPRng*:
Old config: LPRng-3.6.21 ifhp-3.3.17
New config: LPRng-3.6.24 ifhp-3.3.17
Problem description:
Partial job output when using @status on HP JetDirect interfaces.
Workaround:
Since I can't turn on status due to some weird problems, the workaround
is to use @pagecount instead of @status. That seems to solve the
partial printout problem.
On Tue, Sep 26, 2000 at 08:55:12AM -0400, David Livingstone wrote:
>
>
> Posted this on the 14-15th originally and never saw a response ... here
> it is again ...
>
> In an effort to solve a problem I upgraded both ifhp and lprng and found
> another problem !
>
> Original config : LPRng-3.6.19 and ifhp-3.3.17
> new config : LPRng-3.6.24 and ifhp-3.3.21
>
> Loaded on a redhat 6.2 system attempting to print to a HP8000 connected
> to a extendnet print server. Packages were all loaded via rpm.
>
> With the old configuration and the following printcap I could print
> successfully :
> deslz:
> :lp=deslz%9100
> :sd=/usr/spool/lpd/deslz
> :mx#0
> :bp=/usr/libexec/filters/pclbanner
> :ifhp=model=hp8000,status@
> :if=/usr/libexec/filters/ifhp
-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
