Your original email ended up in my Spam Collection Sack, and this is not the best place for it. This could be due to that fact that you sent it directly to me, or you sent it to the LPRng mailing list and you were not subscribed to it. Or you might be trying to beat the list security and were sending to lprng-owner and expecting to spam the list :-) If you are subscribed to the mailing list, then you might have sent it from a site or address different than the one that you registered with. If the latter is the case and you want to post from this address then send me ([EMAIL PROTECTED]) email with LPRNGMAIL in the SUBJECT line so my junk mail purging system will not toss it into the bit shredder (we shred our email for security reasons). In fact, if you any problems with the list, send me email with LPRNGMAIL in the header. The best way to get answers is via the LPRng mailing list, which I peruse on a fairly frequent basis. To subscribe, send mail to: [EMAIL PROTECTED] with the word subscribe in the body. This reply may be sent by a semiautomatic system, and the real person actually may be drinking coffee at the present time... so my apologies for the one-size-fits-all introduction. Patrick Powell Astart Technologies, [EMAIL PROTECTED] 9475 Chesapeake Drive, Suite D, Network and System San Diego, CA 92123 Consulting 858-874-6543 FAX 858-279-8424 LPRng - Print Spooler (http://www.astart.com) Here was your original question, perhaps with an answer attached. > From [EMAIL PROTECTED] Thu Sep 14 09:06:46 2000 > From: [EMAIL PROTECTED] > Date: Thu, 14 Sep 2000 09:11:12 -0700 (PDT) > To: [EMAIL PROTECTED] > Subject: NONMEMBER from [Uwe Fischer <[EMAIL PROTECTED]>] > > >From owner-lprng Thu Sep 14 09:11:08 2000 > Received: from east.millennianet.com (east.millennianet.com [206.71.161.23]) > by astart2.astart.com (8.9.3/8.9.3) with ESMTP id JAA05650 > for <[EMAIL PROTECTED]>; Thu, 14 Sep 2000 09:11:06 -0700 (PDT) > Received: from sys2.amsterdam.nl.eu.psi.net (sys2.amsterdam.nl.eu.psi.net >[154.15.249.6]) > by east.millennianet.com (8.9.2/8.9.2) with ESMTP id JAA27123 > for <[EMAIL PROTECTED]>; Thu, 14 Sep 2000 09:05:31 -0700 (PDT) > Received: from [212.222.82.66] (helo=ilb-gate.ilb.de) > by sys2.amsterdam.nl.eu.psi.net with smtp (Exim 1.90 #1) > for [EMAIL PROTECTED] > id 13ZbSg-00043R-00; Thu, 14 Sep 2000 17:02:08 +0100 > Received: from mailgw.pdm.ILB-Potsdam.DE by ilb-gate.ilb.de > via smtpd (for [154.15.251.146]) with SMTP; 14 Sep 2000 16:02:01 UT > Received: from ilb.de ([EMAIL PROTECTED] [193.97.176.6]) > by linux10.pdm.ILB-Potsdam.DE (8.8.7/8.8.7) with ESMTP id RAA25835; > Thu, 14 Sep 2000 17:59:13 +0200 > Sender: [EMAIL PROTECTED] > Message-ID: <[EMAIL PROTECTED]> > Date: Thu, 14 Sep 2000 18:01:58 +0200 > From: Uwe Fischer <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > Organization: InvestitionsBank Brandenburg > X-Mailer: Mozilla 4.73 [en] (X11; I; Linux 2.2.15-4mdk i586) > X-Accept-Language: de, en > MIME-Version: 1.0 > To: [EMAIL PROTECTED] > Subject: LPRng-3.6.24 prints Banner-Pages with 'sh'-option - Why? > Content-Type: text/plain; charset=us-ascii > Content-Transfer-Encoding: 7bit > > Hi, > > I have a big problem with my Linux-PC's and LPRng-3.6.24. > > I have set the sh-option in /etc/printcap and in /etc/lpd.conf, but I > get banner-pages. Why? > Can you give me a hint? > > Many thanks Uwe > > > --------------------------------- > My /etc/printcap: > > # LABEL apsfilter > # apsfilter setup Die Apr 27 14:27:39 CEST 1999 > # > # APS_BASEDIR:/usr/local/apsfilter > # > # > ascii|lp1|laserjet-a4-ascii-mono|laserjet ascii mono:\ > :sh:\ > :sd=/var/spool/lpd/laserjet-a4-ascii-mono:\ > :lf=/var/spool/lpd/laserjet-a4-ascii-mono/log:\ > :af=/var/spool/lpd/laserjet-a4-ascii-mono/acct:\ > :if=/usr/local/apsfilter/filter/aps-laserjet-a4-ascii-mono:\ > :mx#0:\ > :lp=raw@pdm-nd12:\ > :remote_support=RQVMC: > > # > lp|LPT1|lp2|laserjet-a4-auto-mono|laserjet auto mono:\ > :sh:\ > :sd=/var/spool/lpd/laserjet-a4-auto-mono:\ > :lf=/var/spool/lpd/laserjet-a4-auto-mono/log:\ > :af=/var/spool/lpd/laserjet-a4-auto-mono/acct:\ > :if=/usr/local/apsfilter/filter/aps-laserjet-a4-auto-mono:\ > :mx#0:\ > :lp=raw@pdm-nd12:\ > :remote_support=RQVMC: > > > # > raw|lp3|laserjet-a4-raw|laserjet auto raw:\ > :sh:\ > :sd=/var/spool/lpd/laserjet-raw:\ > :lf=/var/spool/lpd/laserjet-raw/log:\ > :af=/var/spool/lpd/laserjet-raw/acct:\ > :if=/usr/local/apsfilter/filter/aps-laserjet-a4-raw:\ > :mx#0:\ > :lp=raw@pdm-nd12:\ > :remote_support=RQVMC: > .common: :sh: :sd=/var/spool/lpd/%P: :lf=log: :af=acct: :mx#0: :remote_support=RQVMC: # you want to have clients send to the server ascii|lp1|laserjet-a4-ascii-mono|laserjet ascii mono:[EMAIL PROTECTED] ascii|lp1|laserjet-a4-ascii-mono|laserjet ascii mono:server :tc=.common :if=/usr/local/apsfilter/filter/aps-laserjet-a4-ascii-mono: :[EMAIL PROTECTED]: :lpd_bounce # lp|LPT1|lp2|laserjet-a4-auto-mono|laserjet auto mono:[EMAIL PROTECTED] lp|LPT1|lp2|laserjet-a4-auto-mono|laserjet auto mono:server :tc=.common :if=/usr/local/apsfilter/filter/aps-laserjet-a4-auto-mono: :[EMAIL PROTECTED]: :lpd_bounce # raw|lp3|laserjet-a4-raw|laserjet auto raw:[EMAIL PROTECTED] raw|lp3|laserjet-a4-raw|laserjet auto raw:server :tc=.common :if=/usr/local/apsfilter/filter/aps-laserjet-a4-raw: :lp=raw@pdm-nd12: :lpd_bounce > > > -- > +-----------------------------------------+---------------------------+ > | Uwe Fischer | Systemadministrator | > +-----------------------------------------+---------------------------+ > | InvestitionsBank des Landes Brandenburg | E-Mail: [EMAIL PROTECTED] | > | Referat EDV (302) | Tel.: 0331/660-1148 | > | GERMANY 14480 Potsdam, Steinstr. 104-106| WWW: http://www.ilb.de | > +-----------------------------------------+---------------------------+ > Patrick Powell Astart Technologies, [EMAIL PROTECTED] 9475 Chesapeake Drive, Suite D, Network and System San Diego, CA 92123 Consulting 858-874-6543 FAX 858-279-8424 LPRng - Print Spooler (http://www.astart.com) ----------------------------------------------------------------------------- If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
