>>>>> "Timothy" == Timothy Demarest <demarest>
>>>>> wrote the following on Tue, 10 Oct 2000 20:35:37 -0700

  Timothy> On Tue, 10 Oct 2000 16:12:38 -0700 (PDT) [EMAIL PROTECTED]
  Timothy> wrote:

  >>  I am suprised at the transfer rate - this is VERY slow.  Something is
  >> wrong here.  I had an HP4000 and it was NEVER this slow.  Mind you, it
  >> took a while for it to PRINT.
  >> 
  >> Do me a favor - instead of appsocket use RFC1179.
  >> 
  >> lp: :[EMAIL PROTECTED] <- no IP.Printer.Address%9100
  >> 
  >> See what the speed is like...
  >> 
  >> By the way, the Solaris lp uses this method, I recall...
  >> 

OK -- here are the stats when I print using [EMAIL PROTECTED]:

 Filter_status: using model 'hp4000' at 16:31:07.694
 Filter_status: setting up printer at 16:31:07.716
 Filter_status: pagecounter 0 at 16:31:07.717
 Filter_status: sending job file at 16:31:07.734
 Filter_status: starting transfer at 16:31:07.735
 Filter_status: initial job type 'POSTSCRIPT' at 16:31:07.737
 Filter_status: decoded job type 'POSTSCRIPT' at 16:31:07.806
 Filter_status: job type 'POSTSCRIPT' at 16:31:07.807
 Filter_status: transferring 1177064 bytes at 16:31:07.830
 Filter_status: 25 percent done at 16:31:07.932
 Filter_status: 50 percent done at 16:31:08.004
 Filter_status: 75 percent done at 16:31:08.076
 Filter_status: data sent at 16:31:08.142
 Filter_status: sent job file at 16:31:08.143
 Filter_status: pagecounter 0, pages 0 at 16:31:08.149
 Filter_status: done at 16:31:08.152

Not even a full second from start to finish for a 1177064 byte job. the
Socket API version continues to take 15+ minutes.

Tim

--
Timothy Demarest                      ArrayComm, Inc.  
[EMAIL PROTECTED]                2480 North 1st Street, Suite 200
http://www.arraycomm.com              San Jose, CA 95131



-----------------------------------------------------------------------------
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body.  For the impatient,
to subscribe to a list with name LIST,  send mail to [EMAIL PROTECTED]
with:                           | example:
subscribe LIST <mailaddr>       |  subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr>     |  unsubscribe lprng [EMAIL PROTECTED]

If you have major problems,  send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------

Reply via email to