#
# gs_uniprint driver
#
# Does the following for GhostScript:
# gs @MODEL.upp -sOutputFile=- ....
#
# Uses:
# gs_converter= \%s{gs_unidriver}
# gs_unidriver =
# @GS@ -q -dSAFER -dBATCH -sOutputFile=- \
# @\%s{gs_device}.upp \%s{gs_options} -
#
# set gs_device to MODEL and you will get the desired operation
#
# The user can interface to this by using the ifhp options:
#
# lp:
# :ifhp=model=gs_uniprint,gs_device=bjc610a0
# gs -q ... @bjc619a0.upp -
Try using:
Printcap
sc800|st800 on server localhost
:server:fq:ff_separator:direct_read:mx#0:ps=status
:lp=/dev/lp1:sd=/usr/spool/lpd/sc800
:filter=/usr/local/libexec/filters/ifhp
:of=/usr/local/libexec/filters/ifhp
#:ifhp=stc800.upp=ghostscript,gs_device=gs_uniprint
:ifhp=model=gs_uniprint,gs_device=stc800
lq300
:server:fq:ff_separator:direct_read:mx#0:ps=status
:lp=/dev/lp0:sd=/usr/spool/lpd/lq300
Patrick Powell Astart Technologies,
[EMAIL PROTECTED] 9475 Chesapeake Drive, Suite D,
Network and System San Diego, CA 92123
Consulting 858-874-6543 FAX 858-279-8424
LPRng - Print Spooler (http://www.astart.com)
> From [EMAIL PROTECTED] Thu Nov 16 11:31:10 2000
> Date: Thu, 16 Nov 2000 18:12:29 +0000 (GMT)
> From: Keith Matthews <[EMAIL PROTECTED]>
> Subject: LPRng: Problem with end of document form feeds
> To: [EMAIL PROTECTED]
>
> I'm having some problems installing LPRng, system details given below.
>
> Without using filters I have got plain ASCII text to print correctly on
> both printers in the system (an LQ300 dot-matrix and a Stylus Color
> 800), but found it necessary to add the fq' entry in the prntcap for
> both to get an end-of-document form feed.
>
> On adding the filter, the Stylus renders the document text correctly but
> refuses to add the form feed (I have not added the filter to the LQ as
> it seems worthless on such a printer).
>
> I'm sure this is a configuration issue but all my attempts have failed
> and I've now run out of ideas.
>
>
> System
>
>
> Definite Linux & (RH 6.1 clone) upgraded to 2.2.17 kernel
>
> LPRng 3.6.26 built from tarball
> ifhp 3.4.1 built from source rpm
> a2ps 4.13b built from tarball
> psutils 1.17 built from tarball
>
>
> Printcap
>
> sc800|st800 on server localhost
> :server:fq:ff_separator:direct_read:mx#0:ps=status
> :lp=/dev/lp1:sd=/usr/spool/lpd/sc800
> :filter=/usr/local/libexec/filters/ifhp
> :of=/usr/local/libexec/filters/ifhp
> :ifhp=stc800.upp=ghostscript,gs_device=gs_uniprint
> lq300
> :server:fq:ff_separator:direct_read:mx#0:ps=status
> :lp=/dev/lp0:sd=/usr/spool/lpd/lq300
>
> The of entry was added in desperation but seems to have had no effect. I
> have tried all ifhp device entries applicable to the Stylus color 800
> except the 1440 dpi version.
>
>
> --
> Keith Matthews Spam trap
>
> Frequentous Consultants - Linux Services,
> Oracle development & database administration
>
>
>
> -----------------------------------------------------------------------------
> YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
> The address you post from MUST be your subscription address
>
> If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
> or lprng-digest-requests) with the word 'help' in the body. For the impatient,
> to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
> with: | example:
> subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
> unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
>
> If you have major problems, send email to [EMAIL PROTECTED] with the word
> LPRNGLIST in the SUBJECT line.
> -----------------------------------------------------------------------------
>
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
