I had the same problem. The printer was closing the connection while it
was warming up. You can tell LPRng/ifhp to leave the connection open as
long as possible, however the printer still kill the connection.

You have to change the "I/O TIMEOUT" at the printers control panel, to
wait long enough for the warm-up to complete.

---------------------------------------------------------------------------
Mike Hurst                                       Systems Support Specialist
[EMAIL PROTECTED]                          Engineering Computing
(519) 888-4567 ext.6146                              University of Waterloo

On Sun, 7 Jan 2001 [EMAIL PROTECTED] wrote:

> > From [EMAIL PROTECTED] Thu Jan  4 14:36:08 2001
> > To: [EMAIL PROTECTED]
> > Subject: LPRng: Power Saver Timeout with IFHP/LPRng
> > Date: Thu, 04 Jan 2001 16:28:33 -0500
> > From: "David E. Cross" <[EMAIL PROTECTED]>
> >
> > I have a problem where a printer in power saver mode will print out 3 header
> > sheets and one job.  What _appears_ to be happening is that IFHP/LPRng is
> > timing out while the printer warms up and then retries.  By the second timeout
> > the printer is ready so when the 3rd attempt happens the printer can do things
> > normally.  
> >
> > What can I do to prevent this from happening, how can I extend the timeout 
> > (if that is what is needed, "send_job_rw_timeout=0" does not appear to 
> > work).  
> >
> > Also, for one more data point, these are lexmark printers running in 
> > "enginesync" mode.
> >
> > --
> > David Cross                               | email: [EMAIL PROTECTED] 
> > Lab Director                              | Rm: 308 Lally Hall
> > Rensselaer Polytechnic Institute,         | Ph: 518.276.2860            
> > Department of Computer Science            | Fax: 518.276.4033
> > I speak only for myself.                  | WinNT:Linux::Linux:FreeBSD
> 
> 
> Could you post a sample of the status produced for this problem?
> 
> i.e. - 
> 
> lpr /some/file/to/print
> 
> <wait until you get the job printed>
> 
> lpq -L >/tmp/post.this
> 
> and post the /tmp/post.this
> 
> Patrick Powell                 Astart Technologies,
> [EMAIL PROTECTED]            9475 Chesapeake Drive, Suite D,
> Network and System             San Diego, CA 92123
>   Consulting                   858-874-6543 FAX 858-279-8424 
> LPRng - Print Spooler (http://www.lprng.com)
> 
> -----------------------------------------------------------------------------
> YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
> The address you post from MUST be your subscription address
> 
> If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
> or lprng-digest-requests) with the word 'help' in the body.  For the impatient,
> to subscribe to a list with name LIST,  send mail to [EMAIL PROTECTED]
> with:                           | example:
> subscribe LIST <mailaddr>       |  subscribe lprng-digest [EMAIL PROTECTED]
> unsubscribe LIST <mailaddr>     |  unsubscribe lprng [EMAIL PROTECTED]
> 
> If you have major problems,  send email to [EMAIL PROTECTED] with the word
> LPRNGLIST in the SUBJECT line.
> -----------------------------------------------------------------------------
> 


-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address

If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body.  For the impatient,
to subscribe to a list with name LIST,  send mail to [EMAIL PROTECTED]
with:                           | example:
subscribe LIST <mailaddr>       |  subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr>     |  unsubscribe lprng [EMAIL PROTECTED]

If you have major problems,  send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------

Reply via email to