Hello.
 I just upgraded from LPRng3.7.1 to LPRng3.7.4 to get the "tc=" to work.

 after a while sysadmins started calling and complaining that one of their
 printers stoped working and it wouldn't start even if restarted!

 I tracked if down to this:

 If you have configuration like this it would block the printer permanently
 until restarted. Even with a simple "lpq" would block the printers!
 The printers would respond with connection refused to telnet/LPD/appsocket
 after the first "lpq" being done.

 .common:
  :sd=/var/spool/lpd/%P

 .client:
  :lp=%P@localhost
  :force_localhost

 osiris:tc=.client
 osiris:server
  :cm=HP5Si UNIT G-Huset
  :[EMAIL PROTECTED]
  :tc=.common


 Error log shows "MIO Error #0000" when trying to print with LPRng 3.7.4
 thru standard LPD.


 Exchanging the lp= with a appsocket corresponding command would work
 around the problem and work as expected.

 Working example:
 --
 osiris:tc=.client
 osiris:server
  :cm=HP5Si UNIT G-Huset
  :lp=osiris.unit.liu.se%9100
  :tc=.common


 Again, LPD-printing worked with 3.7.1 with HP5Si.
 Also, LPD-printing DOES work with newer printers like HP4050 & LPRng3.7.4!

 Envirovment:
 Linux Redhat 6.2 with LPRng 3.7.1 & 3.7.4.
 HP5Si with Jetdirect J2550B (A05.05 firmware) and NetJet ethernet cards.
 All printing is done thru HP JetDirect interface.

-- 
=====================================================================
Dejan Ilic, Tech Univ. of Linkoping, Sweden Phone:+46-(0)13-473 01 06
Email: [EMAIL PROTECTED]      Web: http://www.lysator.liu.se/~svedja
=====================================================================


-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address

If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body.  For the impatient,
to subscribe to a list with name LIST,  send mail to [EMAIL PROTECTED]
with:                           | example:
subscribe LIST <mailaddr>       |  subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr>     |  unsubscribe lprng [EMAIL PROTECTED]

If you have major problems,  send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------

Reply via email to