Hi all.
I'm new to lprng and have the following problem with my setup:
There is a terminal server and some thin clients. Some of these clients have
a printer attached and are running a lprng with this printcap:
lp
:server:sh:sf:direct_read:mx#0:ps=status
:sd=/var/spool/lpd/lp
:lp=/dev/lp0
and on the terminal server:
kyocera|PS_1200 on server localhost
:server:sh:direct_read:mx#0:ps=status
:[EMAIL PROTECTED]
:sd=/var/spool/lpd/kyocera
:if=/usr/lib/filters/apsfilter/apsfilter
In fact there is a postscript printer attached, but it only prints pure text
- not interpreted postscript when doing "lpr -Pkyocera /etc/printcap":
%!PS_Adobe-3.0
%% Title: stdin
%% For: daemon
etc.
Is there an obvious error in my setup? Looks like some wrong linefeeds?
Anyway: Is there a way to run the client lprng without the need for a spool
directory?
Thanks in advance,
-Cajus Pollmeier
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
