Using the following printcap entry
pr2019hb
:sd=/var/spool/lpd/%P
:sh:mx=0
:if=/usr/local/libexec/filters/ifhp -Tdebug=1
:lf=log
:lp=144.46.67.104%9100
:ifhp=model=hpdj1200,status@
I tried to print to 755cm, 750c, and 1055cm, altering the model
accordingly. Since there is no model for 1055cm, I tried hpdj1200.
Looking at the content of status file, and the output of lpq command,
everything is normal. I got JSUCC and I was told the print job had
been done. I went to each one of the big printers, there is nothing
came out. The LED show READY STATUS. I thought may be I'm hitting
a wrong printer, but I did verify the IP address is the one used by
the printer, and I did the same thing on at least two printers.
So far the xerox and phaser printers worked quite well with LPRng, only
the HP Design Jet is so hard to work with.
Can somebody help?
Jun
__________________________________________________________________
Get your own FREE, personal Netscape Webmail account today at
http://webmail.netscape.com/
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
