On Tue, Nov 06, 2001 at 04:22:14PM -0500, Dave Lovelace wrote:
> Luke Bakken wrote:
> >
> > > lp|doppel:\
> > > :sh:\
> > > :ml=0:\
> > > :mx=0:\
> > > :sd=/var/spool/lpd/lp:\
> > > :rm=10.43.224.51:\
> > > :rp=lp:\
> > > :lpd_bounce=true:\
> > > :append_z=duplex,a4
> > > :ifhp=model=hp8100,status@
> > > :filter=/opt/DRKifhp/libexec/filters/ifhp
> >
> > try removing the rp and rm lines and replacing them with:
> >
> > :lp=10.43.224.51%9100
> >
> > also remove the lpd_bounce line perhaps?
> >
> > Luke
> >
> If he does that, he may also need to remove the status@.
well, i tried the following:
lp2|doppel2:\
:sh:\
:ml=0:\
:mx=0:\
:lp=10.43.224.51%9100:\
:sd=/var/spool/lpd/test:\
:append_z=duplex,a4
:ifhp=model=hp8100
:filter=/opt/DRKifhp/libexec/filters/ifhp
still the same problem. takes a very long time, but prints out
correctly.
best regards,
clemens
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
