When it took less than 2 seconds,first lp RECV 'lp'displays,then lp SERVER 'lp' and lp (Work print) almost displays simultaous. At this time ,the result of ping is about 20usec. (Both client and server are at a same cisco 2950 switch.)
When it took 92 seconds,i've found that : after 12 seconds,use ps -ax,it displays lp RECV 'lp',and after 50 seconds,it displays lp SERVER 'lp',and after92 seconds,then lp (Worker print) 'lp' displays.At this time, ping from client(RH 7.1) to server ,the result is about 10ms. (The distance between client and server is about 200 metres.) As for the second,why the state lp RECV 'lp' changed to lp SERVER 'lp' took so long time ? I've reference Q179156,and edit the registery, but couldn't resolve my problem. I'm urgent. regards _________________________________________________________ Do You Yahoo!? �����籭�����һ�棬Ӯȡ���籭��Ʊ��һ�֡� http://cn.fifaworldcup.yahoo.com/ ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
