On 2002.06.14 09:54 Dave Lovelace wrote: > Karl O . Pinc wrote: > > > > Maybe your getting this message because you haven't run > > printconf-gui (or printconf-tui) and configured a printer? > > > > On 2002.06.13 21:44 Milt Cooper wrote: > > > Joel; > > > > > > Sorry for that omission. /etc/printcap reads; > > > : sd =/var/spool/lpd/lp0:\ > > > : mx #0:\ > > > : sh :\ > > > : lp =/dev/usb /lp0:\ > > > :if =/var/spool/lpd/lp0/filter: > > > > > > The configuration was done with the graphical 'printtool' client, > which > > > comes with every Red Hat - based system. > > > > > > Milt > > > > Doesn't printtool run printconf-gui?
Yes. My bad. As someone pointed out, running it again would only restart the debugging process from the beginning. Karl <[EMAIL PROTECTED]> ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
