On Thu, 2003-07-24 at 12:29, Patrick Powell wrote: Patrick, what you say makes sense. If I understand you correctly all I would need to change is :append_z to :append_z intray1. The problem is that after this change the queue stalls. I also tested this against a HP4050 where the differences between the printcap entries are :ifhp=model=hp4050,pcl :append_z duplex, intray3, and postscript files do print to the correct tray but PCL files do not.
> > From [EMAIL PROTECTED] Thu Jul 24 08:38:47 2003 > > Subject: LPRng: Tray selection for PCL files > > From: Robert Fausey <[EMAIL PROTECTED]> > > To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> > > Date: 24 Jul 2003 10:59:15 -0400 > > > > With the following printcap entry I am able to peform tray selection for > > a HP8000 printer but only for postscript files. What is missing for > > tray selection for PCL files? > > > > :append_z letterhead, simplex > > :bp=/var/local/LPRng/libexec/filters/cit.banner.sh > > :filter=/var/local/LPRng/libexec/filters/ifhp > > :ifhp=model=hp8000,pcl,status@,forceprocessing > > :lf=/var/local/LPRng/spool/lpd.log > > :lp=psnt2%9100 > > :lpd_force_poll > > :mc=0:ml=0:mx#0:bk:rw > > :of=/var/local/LPRng/libexec/filters/ifhp > > :sd=/var/local/LPRng/spool/lpd/%P > > :send_job_rw_timeout=0 > > > > > HP8000 uses HP4000 PCL commands > > ## We have printcap information > [ hp4000_pcl ] > ## pcl paper source selection > ## use -Zsource=n > ## 0 - current, 1 - tray 2 (first cassette), 2 - manual > ## 3 - ???? > ## 4 - tray 1 (Multipurpose), 5 - tray 3 (second cassete) > ## 6 - envelope 8 - tray 4 (third cassette) > ## 20-39 high capacity input trays 2-21 > ## > > pcl_intray1=\033&l4H > pcl_intray2=\033&l1H > pcl_intray3=\033&l5H > pcl_intray4=\033&l8H > > > > You can look at the pcl it is generating by using: > > echo test | ifhp -Tdev=/tmp/out,trace,model=hp8000,pcl,status@,forceprocessing > > I got: > [EMAIL PROTECTED] > @PJL RESET > @PJL JOB NAME = ":" DISPLAY = ":" > @PJL RDYMSG DISPLAY = ":" > @PJL INFO ID > @PJL USTATUSOFF > @PJL USTATUS JOB = ON > @PJL USTATUS DEVICE = ON > @PJL USTATUS PAGE = ON > @PJL USTATUS TIMED = 10 > @PJL ENTER LANGUAGE = PCL > ^[E^[&l2A^[&k2G^[&s0C^[&l0O^[9^[(s0P^[(s10.00H^[(s4099Ttest > [EMAIL PROTECTED] > @PJL RDYMSG DISPLAY = ":" > @PJL EOJ NAME = ":" > @PJL USTATUSOFF > @PJL USTATUS JOB = ON > @PJL USTATUS DEVICE = ON > @PJL USTATUS PAGE = ON > @PJL USTATUS TIMED = 10 > @PJL RDYMSG DISPLAY = "Done: :" > ^[%-12345X > > > So now you can try using the tray commands: > > > > echo test | ifhp > -Tdev=/tmp/out,trace,model=hp8000,pcl,status@,forceprocessing,intray1 > > [EMAIL PROTECTED] > @PJL RESET > @PJL JOB NAME = ":" DISPLAY = ":" > @PJL RDYMSG DISPLAY = ":" > @PJL INFO ID > @PJL USTATUSOFF > @PJL USTATUS JOB = ON > @PJL USTATUS DEVICE = ON > @PJL USTATUS PAGE = ON > @PJL USTATUS TIMED = 10 > @PJL SET INTRAY1 = ON > @PJL ENTER LANGUAGE = PCL > ^[E^[&l2A^[&k2G^[&s0C^[&l0O^[9^[(s0P^[(s10.00H^[(s4099T^[&l4Htest > ^^^ tray selection > [EMAIL PROTECTED] > @PJL RDYMSG DISPLAY = ":" > @PJL EOJ NAME = ":" > @PJL USTATUSOFF > @PJL USTATUS JOB = ON > @PJL USTATUS DEVICE = ON > @PJL USTATUS PAGE = ON > @PJL USTATUS TIMED = 10 > @PJL RDYMSG DISPLAY = "Done: :" > ^[%-12345X > > Does this help a bit? > > Patrick Powell Astart Technologies > [EMAIL PROTECTED] 6741 Convoy Court > Network and System San Diego, CA 92111 > Consulting 858-874-6543 FAX 858-751-2435 > LPRng - Print Spooler (http://www.lprng.com) > > ----------------------------------------------------------------------------- > YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST > The address you post from MUST be your subscription address > > If you need help, send email to [EMAIL PROTECTED] (or lprng-requests > or lprng-digest-requests) with the word 'help' in the body. For the impatient, > to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] > with: | example: > subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] > unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] > > If you have major problems, send email to [EMAIL PROTECTED] with the word > LPRNGLIST in the SUBJECT line. > ----------------------------------------------------------------------------- -- Sideshow Bob: You wanted to be Krusty's sidekick since you were five! What about the buffoon lessons, the four years at clown college. Cecil: I'll thank you not to refer to Princeton that way. ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
