You don't need anything fancy. Just use different filters for the same
phyical device. Here is what I have in my printcap:
ps|z53:\
sh:sd=/var/spool/lpd/z53:mx#0:\
:lp=/dev/lp0:\
:if=/usr/local/lexmark/z53/z53.sh
:mc#1
:sh:
Photo:\
sh:sd=/var/spool/lpd/z53Photo:mx#0:\
:lp=/dev/lp0:\
:if=/usr/local/lexmark/z53/z53Photo.sh
:mc#1
:sh:
Draft:\
sh:sd=/var/spool/lpd/z53Draft:mx#0:\
:lp=/dev/lp0:\
:if=/usr/local/lexmark/z53/z53Draft.sh
:mc#1
:sh:
Everything is pretty much the same except for the filter. I set up each
filter to do get the output I wanted, and that's all there was to it.
Joel
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
