Hello!
I'll explain problem after doing the question.
I've got a queue with two filters, one for the as (Accounting Start)
and other for the ae (Accounting end). When I send a big job to the
queue and I've got enough paper on the printer occurs the following:
1) as is executed properly
2) the job begin to be printed, the printer prints 3 pieces of paper and
there aren't pieces of paper left and for this reason the job is not
completely sent to the printer, in fact, the as filter is not executed.
3) After the time indicated by send_job_rw_timeout the job there is
another attempt to print the job and after another else. There are 3
attempts to print the job but in the parameter send_try the number of
attempts is 10. Is there another parameter where I can configure it?
Thanks in advance,
Regards,
Antonio.
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
