On Fri, 27 Feb 2004, Anthony Ewell wrote: > Dudes! The error was from LPRng Tool! From Chapter 11 of the above:
Well, if you read your original post, LPRngTool wasn't mentioned until several items in, leading me to beleive that you had edited by hand to set up the queues -- otherwise, not being familiar with LPRngTool, I probably would not have chimed in. ;) > The following is an example of a simple printcap entry that can > be used to send a job to > a remote printer using the RFC1179 protocol: > # *LPRng* syntax > > # :lp value is 'where to print the job' > lp: > :[EMAIL PROTECTED] > > # OR Vintage BSD Print Spooler Syntax > # (*LPRng* supports this as well) > # :rp = remote printer, :rm = remote machine or host > lp: > :rp=raw:rm=10.0.0.1 > > I also want the TCP/IP (jet direct, etc.) section of LPRng Tool > to allow > me to add the queues name (rp) to it. Umm... nuh-uh. See, this is where it seems like there's some confusion. When printing via TCP/IP on the JetDirect interface, there are NO queues and you print on port 9100. If you want to print to an "rp" on a remote printer, you are speaking of RFC1179 LPR printing -- distinctly different. One cannot (again, to my knowledge) combine the two. Perhaps in LPRngTool you have somehow selected LPR and TCP/IP simultaneously and this is why it's doing this...? > My "ideal" LPRng Tool is one where I have NO HAND WORK after I use it. :-) Agreed! :) > --Tony > > p.s. "pilot error" ?!?!?! I do believe the technical term for this is > "short between > the head sets!" ;-) And, yes, I am guilty of a lot of that! We all make mistakes... I think you're referring to those who do so more than others. :) Cheers, ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | | Ryan Novosielski - Jr. UNIX Systems Admin |$&| |__| | | |__/ | \| _| | [EMAIL PROTECTED] - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent. | IST/ACS - NJMS Medical Science Bldg - C630 ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
