All right I have modified my syncoptions by adding what to do in each action
(create_value,default_value,force_value)
lsc.syncoptions.ADpam.telephoneNumber.create_value=srcBean.getAttributeValueById("telephoneNumber")
lsc.syncoptions.Sunit.telephoneNumber.default_value = 0000000000
lsc.syncoptions.Sunit.telephoneNumber.force_value =
srcBean.getAttributeValueById("telephoneNumber")
However I don't see where to put K F or M...
It works anyway
Thank you
François
-------- Message d'origine--------
De: Jonathan Clarke [mailto:[email protected]]
Date: jeu. 17/06/2010 15:40
À: Clément OUDOT
Cc: Raphaël Ouazana-Sustowski; [email protected]; François
Chapuis ([email protected]); Gunter Holzer
Objet : Re: [lsc-users] RE : RE : RE : ldap2ldap synchro task configuration
On 17/06/2010 14:29, Clément OUDOT wrote:
> 2010/6/17 Raphaël Ouazana-Sustowski<[email protected]>:
>> See http://lsc-project.org/wiki/documentation/1.2/configuration/syncoptions
>>
>
> Please check your lsc.syncoptions.TASKNAME.default.action value: this
> should be F and not K if you want always modify destination data
Also check the action type you're using : create_value will only add the
value if you're adding a new entry which was not previously in the
destination.
Jonathan
--
--------------------------------------------------------------
Jonathan Clarke - [email protected]
--------------------------------------------------------------
Ldap Synchronization Connector (LSC) - http://lsc-project.org
--------------------------------------------------------------
_______________________________________________________________
Ldap Synchronization Connector (LSC) - http://lsc-project.org
lsc-users mailing list
[email protected]
http://lists.lsc-project.org/listinfo/lsc-users
