Many thanks David, your response correspond to what i understand of LSC 
behavior. 

For the comma character my phpLdapAdmin permit to set it, so i will have to 
refuse that character.

Regards,

Le 16/07/13, David Coutadeur  <[email protected]> a écrit :
> 
> It seems that DN is case insensitive, but CN is not...
> I am not sure how matching rules are set and retrieved on AD.
> Issue 342 is still open and correspond quite well to your problem.
> 
> As far as I know, it is highly discouraged to use comma characters in DN
> components, in any directory...
> Considering this, LSC should manage the comma character.
> 
> Le 16/07/2013 15:01, "POISSON Frédéric" a écrit :
> > Hello David,
> > 
> > Yes conditions correspond :
> > ...
> >                             <conditions>
> >                                 <create>true</create>
> >                                 <update>true</update>
> >                                 <delete>true</delete>
> >                                 <changeId>true</changeId>
> >                             </conditions>
> > 
> > My pivot as source LDAP is Sun DS is nsUniqueID, i map this attribute to 
> > serialNumber on Active Directory. I see that modrn works when i change CN 
> > by adding letters, but don't work when changing from/to upper or lower case 
> > letter.
> > 
> > DN component on destination is "CN={cn},<base Active Directory>".
> > 
> > Notice that i see after sending my email this bug id 
> > http://tools.lsc-project.org/issues/342 , it seems to be quite similar ?
> > 
> > I have also another question about modrdn, does LSC manage the comma 
> > character ?  
> > 
> > Regards,
> > Le 16/07/13, David Coutadeur  <[email protected]> a écrit :
> >>
> >> Hi Frederic,
> >>
> >> Did you set your changeId condition accordingly ?
> >> What is your DN component and your pivot attribute ?
> >>
> >>
> >>         <conditions>
> >>                 <create>true</create>
> >>                 <update>true</update>
> >>                 <delete>true</delete>
> >>                 <changeId>true</changeId>
> >>         </conditions>
> >>
> >> Regards,
> >> David
> >>
> >>
> >> Le 16/07/2013 14:26, "POISSON Frédéric" a écrit :
> >>> Hello,
> >>>
> >>> I'm running some test of synchronization between from a Sun DS to an AD. 
> >>> I have defined a pivot attribute which permit normally to identify each 
> >>> entries inside my source. 
> >>>
> >>> When i update an Sun DS entry on attribute cn which is a part of the DN 
> >>> of the AD entry synced, LSC do a replace ldap operation instead of modrdn 
> >>> ? The modification done on the source is just replacing lower characters 
> >>> to upper characters on cn attribute.
> >>>
> >>> Have you ever encounter this problem ?
> >>>
> >>> With DEBUG inside logback.xml i see this line :
> >>> ...  Replacing attribute "cn": source values are [Stephane TEST], old 
> >>> values were [Stephane test], new values are [Stephane TEST]
> >>>
> >>> Regards,
> >>> PS: I use LSC 2.0.2.
> >>> --
> >>>
> >>> Frederic Poisson
> >>>   
> >>>
> >>>
> >>>
> >>>
> >>> _______________________________________________________________
> >>> Ldap Synchronization Connector (LSC) - http://lsc-project.org
> >>>
> >>> lsc-users mailing list
> >>> [email protected]
> >>> http://lists.lsc-project.org/listinfo/lsc-users
> >>
> >>
> >>
> > --
> > 
> > Frederic Poisson
> >  
> > 
> 
> 
> -- 
> David Coutadeur - intégrateur LinID
> Groupe LINAGORA - BU LGS
> +33 1 46 96 63 63 / poste 601
> +33 6 42 00 63 19
> 80 rue Roque de Fillol
> 92800 PUTEAUX
> 
> "/La présente transmission contient des informations confidentielles
> appartenant à Linagora, exclusivement destinées au(x) destinataire(s)
> identifié(s) ci-dessus. Si vous n'en faites pas partie, toute
> reproduction, distribution ou divulgation de tout ou partie des
> informations de cette transmission, ou toute action effectuée sur la
> base de celles-ci vous sont formellement interdites.
> Si vous avez reçu cette transmission par erreur, nous vous remercions de
> nous en avertir et de la détruire de votre système d'information.
> 
> The present transmission contains privileged and confidential
> information belonging to Linagora, exclusively intended for the
> recipient(s) thereabove identified. If you are not one of these
> aforementioned recipients, any reproduction, distribution, disclosure of
> said information in whole or in part, as well as any action undertaken
> on the basis of said information are strictly prohibited. If you
> received the present transmission by mistake, please inform us and
> destroy it from your messenging and information systems./"
> 
> 
--

Frederic Poisson
 
_______________________________________________________________
Ldap Synchronization Connector (LSC) - http://lsc-project.org

lsc-users mailing list
[email protected]
http://lists.lsc-project.org/listinfo/lsc-users

Reply via email to