Le 21/08/2017 à 04:20, David Erickson a écrit :
Hi all-
Hello David,
I'd like to run LSC in async mode listening for updates and acting on
them, as opposed to polling, however a couple things I've noticed:
-Clean doesn't get run at all while in async mode, why? Can I enable it?
No, clean phase must be run with option -c. Async phase is just for sync
(-a instead of -s).
-I have OpenLDAP 2.4.28, and my async ldap source service configured,
but when I watch debug logging, it looks like it is still polling
every 10 seconds as opposed to being triggered based on changes, why?
Are you to have syncprov overlay configured on OpenLDAP? Note also that
OpenLDAP 2.4.28 is really old, you should use a more recent version.
Also, when I run "sudo lsc -t 1 -s all -c all", I'm seeing the
following errors printed in the log:
Aug 20 15:38:45 - ERROR - There is no future associated with operation
message ID 15, perhaps the operation would have been completed
Aug 20 15:38:45 - ERROR - There is no future associated with operation
message ID 15, perhaps the operation would have been completed
Aug 20 15:38:45 - ERROR - There is no future associated with operation
message ID 20, perhaps the operation would have been completed
Aug 20 15:38:45 - ERROR - There is no future associated with operation
message ID 20, perhaps the operation would have been completed
Can these be ignored? And if so, are they going to be fixed? I'd
like to turn my logging to error only and have it email me in the
event of an error, and if these are being printed on every run that
won't work.
Don't know, try to use a more recent version of OpenLDAP to see if these
messages are still present.
--
Clément OUDOT
Consultant en logiciels libres, Expert infrastructure et sécurité
Savoir-faire Linux
137 boulevard de Magenta - 75010 PARIS
Blog: http://sflx.ca/coudot
_______________________________________________________________
Ldap Synchronization Connector (LSC) - http://lsc-project.org
lsc-users mailing list
[email protected]
https://lists.lsc-project.org/cgi-bin/mailman/listinfo/lsc-users
