HI acee:

PUA does not advertise reachable or unreachable details, it advertise events 
with prefix from up to down.



胡志波 Hu Zhibo
Mobile: +86-18618192287<tel:+86-18618192287>
Email: huzh...@huawei.com<mailto:huzh...@huawei.com>

发件人:Acee Lindem (acee) <a...@cisco.com>
收件人:Peter Psenak <ppsenak=40cisco....@dmarc.ietf.org>;Robert Raszuk 
抄 送:Aijun Wang <wang...@chinatelecom.cn>;Xiaoyaqun 
<xiaoya...@huawei.com>;Huzhibo <huzh...@huawei.com>;Aijun Wang 
<wangai...@tsinghua.org.cn>;lsr <lsr@ietf.org>
时 间:2020-07-31 00:04:02
主 题:Re: [Lsr] New Version Notification for 

So, how do we define a reachable route - is it any route subsumed by the 
summary LSA that we knew about in the past that becomes unreachable? When the 
PUA is withdrawn, how do we know whether it is because of expiration of the 
interval or the route becoming reachable again? This is a slippery slope.

On 7/30/20, 10:34 AM, "Lsr on behalf of Peter Psenak" <lsr-boun...@ietf.org on 
behalf of ppsenak=40cisco....@dmarc.ietf.org> wrote:

    On 30/07/2020 16:30, Robert Raszuk wrote:
    > Hey Peter,
    > Not sure how smart you really want to be here but keep in mind that BGP
    > say option C may never hear about it all the way to the egress PE in
    > other domain or area ... It is almost always incongruent with IGP.
    > So if the BGP path is installed it will indeed be at risk to resolve via
    > less specific when it is still active BGP path and you too quickly
    > remove info about unreachability.

    again, if you are smart you can use this info to your advantage, even
    without putting it in the forwarding and leaving the less specific stuff


    > Thx
    > R.
    > On Thu, Jul 30, 2020 at 4:21 PM Peter Psenak <ppse...@cisco.com
    > <mailto:ppse...@cisco.com>> wrote:
    >     On 30/07/2020 16:14, Robert Raszuk wrote:
    >      >      > 2:For bgp example,when the pe node down,the bgp peer
    >     must down
    >      >     within
    >      >      > 30 mintus,It will not get it up via cancle advertise pua.
    >      >
    >      >     for the above it is sufficient to advertise the
    >     unreachability for few
    >      >     seconds from each ABR independently. That would be a much
    >     more solid
    >      >     proposal.
    >      >
    >      >
    >      > Not sure about "few seconds" ... IBGP def hold time in number of
    >      > implementations is 180 sec :) .. but few minutes will work for 
    >     depends how you use it.
    >     If you can use the unreachable info in a smart way, it's sufficient if
    >     it is present for a very short time interval.
    >     thanks,
    >     Peter
    >      >
    >      > Thx,
    >      > R.
    >      >

    Lsr mailing list

Lsr mailing list

Reply via email to