Hi ALL, In RFC5329, OSPFv3 TE Link TLV have below sub-TLVs 18 - Neighbor ID (8 octets) ： Neighbor Interface ID ， Neighbor Router ID 19 - Local Interface IPv6 Address 20 - Remote Interface IPv6 Address
question1： 4.4. Remote Interface IPv6 Address Sub-TLV if link-LSA not have a prefix length of 128 and the LA-bit how to get remote Interface ipv6 address to fill the tlv value. question2： if router only advertise : 18 - Neighbor ID (8 octets) ： Neighbor Interface ID ， Neighbor Router ID 19 - Local Interface IPv6 Address how to match router's TE Link TLV with peer router's TE Link TLV question3： 4. Link TLV --- " The Neighbor ID sub-TLV is mandatory for OSPFv3 Traffic Engineering support. " it means Local Interface IPv6 Address Sub-TLV is not mandatory if only advertise : 18 - Neighbor ID (8 octets) how to match router's TE Link TLV with peer router's TE Link TLV Thanks, Jenny In section 4 Link TLV： [cid:[email protected]] [cid:[email protected]] [cid:[email protected]]
_______________________________________________ Lsr mailing list [email protected] https://www.ietf.org/mailman/listinfo/lsr
