Hi Aijun,

After almost 30 years, we're not going to deprecate OSPF LSInfinity based on 
your opinion. 

Please be specific as to what you feel is problematic with usage in the 24-bit 
metric in the E-Intra-Area-Prefix LSA.

Thanks,
Acee

On 10/11/22, 12:09 AM, "Peter Psenak" <[email protected]> wrote:

    Aijun,

    On 11/10/2022 05:44, Aijun Wang wrote:
    > Hi, Peter:
    > 
    > Let's focus on OSPF itself then.
    > 
    > In OSPFv2(RFC2328) and OSPFv3(RFC5340), the metric length for the link or 
intra-area prefix is 16 bit; but the metric length for the summary 
LSA/inter-area is 24bit.
    > There will be no problem to define the LSInfinity for the summary LSA as 
0xFFFFFF( although the usages of such definition is doubtful and should be 
revaluated----for example, is there any real deployment for the mentioned 
possible usages?)
    > 
    > But for OSPFv3(RFC8362), if you still define the LSInifiity as 0xFFFFFF, 
there is possible the cost to some prefixes advertised by the ABR reach this 
value, it is unreasonable to consider such prefixes are unreachable.  Then, 
rely on such value of the metric to determine the reachability is problematic.

    again, there is no problem. For RFC8362 0xFFFFFF already means 
    LSInfinity for inter/external prefixes. All we propose is to define the 
    same meaning for that metric for intra-area prefixes as it is 24 bits as 
    well.

    Peter

    > 
    > We should decrease or abandon such unsound reliance.
    > 
    > It is easy for the device to implement such special treatment, it is 
difficult and complex for the operator to run the network based on such special 
treatment.
    > 
    > 
    > Best Regards
    > 
    > Aijun Wang
    > China Telecom
    > 
    > -----Original Message-----
    > From: [email protected] <[email protected]> On Behalf Of Peter 
Psenak
    > Sent: Monday, October 10, 2022 3:56 PM
    > To: Aijun Wang <[email protected]>; 'Acee Lindem (acee)' 
<[email protected]>; 'Ketan Talaulikar' <[email protected]>; 
'Peter Psenak' <[email protected]>
    > Cc: [email protected]
    > Subject: Re: [Lsr] RFC 8362 and LSInfinity
    > 
    > Aijun,
    > 
    > On 09/10/2022 07:44, Aijun Wang wrote:
    >> Hi, Acee, Peter and Ketan:
    >>
    >> I propose we limit the usage of LSInfinity within the network. That is
    >> to say, we should depreciate its usages, not enhance it.
    >>
    >> As defined in RFC2328, the sole purpose of LSInfinity is to let the
    >> receiver bypass the SPF calculation for the associated LSA:
    >>
    >> a)In case the advertisement of LSA for some special aim.
    >>
    >> b)Another is for the premature aging the LSA (which is not encouraged).
    >>
    >> There is few application for the a) usage until now, same situation
    >> for
    >> b) usage.
    > 
    > definition of LSInfinity is very exact - it means unreachability.
    > 
    >>
    >> The reason for the above situations may be the definition within the
    >> RFC2328 is counterintuitive----the maximum value of the metric should
    >> be used for the last resort of the reachability, no other more
    >> meanings. Or else, it will complex the implementation and deployment, 
for example:
    >>
    >> a)For OSPFv2, the LSInfinity is defined as 0xffffff
    >>
    >> b)For IS-IS, the equivalent variable is MAX_PATH_METRIC, which is
    >> defined as 0xFE000000
    > 
    > you are comparing apples to oranges. These are two different protocols.
    > 
    >>
    >> c)For OSPFv3, which value will you be defined, especially for the
    >> Intra-Area-Prefix? Considering the metric for the intra-area and
    >> inter-area are all 24-bit long?
    > 
    > OSPFv3 inherits all the constants defined for OSPFv2, it's explicitly 
mentioned in the OSPFv3 RFC. And LSInfinity is 24 bits long.
    > 
    >>
    >> d)And, for the metric in ”IP Algorithm Prefix Reachability” ,
    >> 
https://datatracker.ietf.org/doc/html/draft-ietf-lsr-ip-flexalgo#section-6.3 
<https://datatracker.ietf.org/doc/html/draft-ietf-lsr-ip-flexalgo#section-6.3>, 
its length is again 32-bit, will you define another LSInfinity value later?
    > 
    > 0xFFFFFFFF seems like a good candidate for the unreachable metric for the 
IP flex-algo.
    > 
    >>
    >> Won’t you think the above special rule complex the whole situation?
    > 
    > not at all.
    > 
    >>
    >> I think we should seek other methods to achieve the necessary goals.
    > 
    > I do not see a problem
    > 
    > thanks,
    > Peter
    >>
    >> Best Regards
    >>
    >> Aijun Wang
    >>
    >> China Telecom
    >>
    >> *From:* [email protected] <[email protected]> *On Behalf Of
    >> *Acee Lindem (acee)
    >> *Sent:* Saturday, October 8, 2022 4:03 AM
    >> *To:* Ketan Talaulikar <[email protected]>; Peter Psenak
    >> <[email protected]>
    >> *Cc:* [email protected]
    >> *Subject:* Re: [Lsr] RFC 8362 and LSInfinity
    >>
    >> Hi Peter, Ketan,
    >>
    >> We’ll do another WG last call on the updated IP Flex Algo document and
    >> it will update RFC 8362. As you probably surmised, this is useful for
    >> OSPFv3 IP Flex Algorithm when you want don’t want to use the prefix
    >> with the base algorithm.
    >>
    >> *From: *Lsr <[email protected] <mailto:[email protected]>> on
    >> behalf of Ketan Talaulikar <[email protected]
    >> <mailto:[email protected]>>
    >> *Date: *Thursday, October 6, 2022 at 3:35 AM
    >> *To: *Peter Psenak <[email protected]
    >> <mailto:[email protected]>>
    >> *Cc: *"[email protected] <mailto:[email protected]>" <[email protected]
    >> <mailto:[email protected]>>
    >> *Subject: *Re: [Lsr] RFC 8362 and LSInfinity
    >>
    >> Hi Peter,
    >>
    >> I support this "update" - not sure if it qualifies as a "clarification".
    >> Also, this obviously is doable only when the network has migrated to
    >> use only Extended LSAs (i.e., legacy LSAs are removed) as indicated in
    >> https://www.rfc-editor.org/rfc/rfc8362.html#section-6.1
    >> <https://www.rfc-editor.org/rfc/rfc8362.html#section-6.1>
    >>
    >> In sparse-mode, the legacy LSAs are used. So if you want a prefix to
    >> be unreachable with the base algorithm, simply omit it from the legacy
    >> Intra-Area-Prefix LSA.
    >>
    >> Thanks,
    >> Acee
    >>
    >> Thanks,
    >>
    >> Ketan
    >>
    >> On Wed, Oct 5, 2022 at 3:01 PM Peter Psenak
    >> <[email protected]
    >> <mailto:[email protected]>>
    >> wrote:
    >>
    >>      Hi Folks,
    >>
    >>      metric of LSInfinity (0xFFFFFF) has been defined in RFC2328:
    >>
    >>      LSInfinity
    >>                The metric value indicating that the destination described
    >>      by an
    >>                LSA is unreachable. Used in summary-LSAs and
    >>      AS-external-LSAs as
    >>                an alternative to premature aging (see Section 14.1). It 
is
    >>                defined to be the 24-bit binary value of all ones: 
0xffffff.
    >>
    >>      RFC5340 inherited it from RFC2328:
    >>
    >>      Appendix B.  Architectural Constants
    >>
    >>           Architectural constants for the OSPF protocol are defined in
    >>      Appendix
    >>           B of [OSPFV2].  The only difference for OSPF for IPv6 is that
    >>           DefaultDestination is encoded as a prefix with length 0 (see
    >>           Appendix A.4.1).
    >>
    >>      Both RFC2328 and RFC5340 used 16 bits metric for intra-area prefix
    >>      reachability, so the LSInfinity was not applicable for intra-area
    >>      prefixes.
    >>
    >>      RFC8362 defines 24-bit metric for all prefix reachability TLVs -
    >>      Intra-Area-Prefix TLV, Inter-Area-Prefix TLV, External-Prefix TLV.
    >>      Although it is silent about the LSInfinity as such, it is assumed 
that
    >>      such metric means unreachability for Inter-Area-Prefix TLV and
    >>      External-Prefix TLV. Given that Intra-Area-Prefix TLV now has 24 
bits
    >>      metric as well, it would make sense to define the LSInfinity as
    >>      unreachable for Intra-Area-Prefix TLV as well.
    >>
    >>      Would anyone object such a clarification in RFC8362?
    >>
    >>      thanks,
    >>      Peter
    >>
    >>      _______________________________________________
    >>      Lsr mailing list
    >>      [email protected] <mailto:[email protected]>
    >>      https://www.ietf.org/mailman/listinfo/lsr
    >>      <https://www.ietf.org/mailman/listinfo/lsr>
    >>
    > 
    > _______________________________________________
    > Lsr mailing list
    > [email protected]
    > https://www.ietf.org/mailman/listinfo/lsr
    > 
    > 


_______________________________________________
Lsr mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/lsr

Reply via email to