Acee, I believe Les and I have agreed to the text that I added and his comments are closed. Les, let me know if you don't agree.
I don't agree with Ketan's comment on removing code points from OSPF TE opaque LSAs. Early code points are already taken and implementations underway. If he can elaborate his concern With having generic metric in opaque LSA We can see what details need to be added in the draft. I got some more comments from Peter. Will publish -12 soon. Rgds Shraddha Juniper Business Use Only -----Original Message----- From: Acee Lindem <acee.lin...@gmail.com> Sent: Friday, May 10, 2024 12:29 AM To: Acee Lindem <acee.lin...@gmail.com> Cc: Shraddha Hegde <shraddha=40juniper....@dmarc.ietf.org>; Ketan Talaulikar <ketant.i...@gmail.com>; lsr <lsr@ietf.org>; draft-ietf-lsr-flex-algo-bw-...@ietf.org; Les Ginsberg (ginsberg) <ginsb...@cisco.com> Subject: Re: [Lsr] Working Group Last Call for "Flexible Algorithms: Bandwidth, Delay, Metrics and Constraints" - draft-ietf-lsr-flex-algo-bw-con-07 [External Email. Be cautious of content] Any update? Thanks, Acee > On Apr 26, 2024, at 11:53 AM, Acee Lindem <acee.lin...@gmail.com> wrote: > > Hi Ketan, Shraddha and Les, > > > I’m trying to conclude this thread and send this document to the AD. I’ve > read the Emails but I must admit I don’t understand all the arguments. > > > Ketan - if we have the generic-metric in IS-IS, why wouldn’t define it in > OSPF as well? If you cannot provide a compelling argument, I ‘m going to > request publication of the document send it to the actual LSR AD. > > Shraddha - I see that you included similar text in section 4.3.1 to address > Les’s comment. I guess the example referring to Flex algo 128/129 is not > needed. > > Les - I’m sure what the I-bit but I don’t see that adding it at this juncture > is a good idea unless the described protocol enhancements don’t work without > it. > > Thanks, > Acee > > > >> On Apr 15, 2024, at 02:46, Shraddha Hegde >> <shraddha=40juniper....@dmarc.ietf.org> wrote: >> >> Hi Ketan, >> Thanks for reply. >> Pls see inline.. >> >> Juniper Business Use Only >> From: Ketan Talaulikar <ketant.i...@gmail.com> >> Sent: Monday, April 8, 2024 2:25 PM >> To: Shraddha Hegde <shrad...@juniper.net> >> Cc: Acee Lindem <acee.lin...@gmail.com>; lsr <lsr@ietf.org>; >> draft-ietf-lsr-flex-algo-bw-...@ietf.org >> Subject: Re: [Lsr] Working Group Last Call for "Flexible Algorithms: >> Bandwidth, Delay, Metrics and Constraints" - >> draft-ietf-lsr-flex-algo-bw-con-07 >> [External Email. Be cautious of content] Hi Shraddha, Thanks for >> your responses. Please check inline below for clarifications with KT. >> On Thu, Apr 4, 2024 at 9:49 AM Shraddha Hegde <shrad...@juniper.net> wrote: >> Hi Ketan, >> Thanks for the review and comments. >> Pls see inline for replies. >> Juniper Business Use Only >> From: Ketan Talaulikar <ketant.i...@gmail.com> >> Sent: Thursday, March 21, 2024 10:07 PM >> To: Acee Lindem <acee.lin...@gmail.com> >> Cc: lsr <lsr@ietf.org>; draft-ietf-lsr-flex-algo-bw-...@ietf.org >> Subject: Re: [Lsr] Working Group Last Call for "Flexible Algorithms: >> Bandwidth, Delay, Metrics and Constraints" - >> draft-ietf-lsr-flex-algo-bw-con-07 >> [External Email. Be cautious of content] Hi All, I have reviewed >> this document and believe it needs some further work before publication. >> I am sharing my comments below: >> 1) There is the following text in sec 2.1 and 2.2 for Generic Metric. >> A metric value of 0xFFFFFF is considered as maximum link metric and a link >> having this metric value MUST NOT be used during Flex-algorithm calculations >> [RFC9350]. The link with maximum generic metric value is not available for >> the use of Flexible Algorithms but is availble for other use cases. >> I believe the FlexAlgo reference here is to >> https://urldefense.com/v3/__https://www.rfc-editor.org/rfc/rfc9350.html*name-max-metric-consideration__;Iw!!NEt6yMaO-gk!BeudAtZGk7-XssYqte2dyPuiegf-oXoroaYsXYyIEJLEdZf1Bh4Jn5Mopid4VlitSAJoWvYiC0bPAdcSDIhyKQ$ >> But the above text does not align with the RFC9350. If a link is to be >> made unavailable for FlexAlgos operating with a specific Generic Metric, >> then the way to do that is to omit that specific Generic Metric TLV from the >> ASLA for flex-algo application. The same would apply for other applications >> - just omit the metric. Why do we need a special MAX-LINK-METRIC value for >> generic metric given that it is a new thing we are introducing? >> <SH> I see what you are saying. Text is updated as below for ISIS and >> similar for OSPF. >> “A metric value of >> 0xFFFFFF is considered as maximum link metric and a link having >> this metric value MUST be used during Flex-algorithm calculations >> as a last resort link as described in sec 15.3 of RFC[9350] KT> >> Thanks - that works. Perhaps also clarify that to make the link unusable by >> FlexAlgo using that generic metric, the advertisement of the particular >> generic metric can be skipped. >> <SH2> ok >> 2) This comment is specific to OSPF given the encoding differences it has >> with ISIS. Section 2.2 allows for Generic Metric TLV to be used in too many >> places without clear specification of what it is used for - this is a >> potential pitfall for interop issues. RFC9492 provides helpful directions >> for us here. >> a) This draft specifies FlexAlgo extensions, it is natural that Generic >> Metric be advertised under ASLA TLV. No issues here. >> b) This draft does not specify anything about use of generic metric in base >> OSPF and as a reminder there is nothing like L-bit in OSPF encoding. >> Therefore, it does not make sense to advertise Generic Metric outside of >> ASLA and under the OSPFv2 Extended Link TLV or OSPFv3 Router Link TLV. >> c) This draft does not specify anything about use of generic metric with >> RSVP-TE/GMPLS. Therefore, it does not make sense to advertise Generic Metric >> in the TE Opaque LSAs. >> We can have specific documents that introduce (b) or (c) when there is a >> proper specification. >> <SH> Generic metric is a link attribute and can be used by other >> applications apart from Flex-algo. >> I don’t see a reason to not take code-points under other applicable LSAs. >> KT> I disagree on this one. There is a reason why what is proposed in the >> draft for ISIS is OK - due to the L-bit in ASLA, we need codepoints both >> under ASLA and at the top level for FlexAlgo. There is no L-bit in OSPF and >> therefore this does not apply. The code-points can be allocated when the >> behavior is specified for those other LSAs and applications (beyond >> FlexAlgo) in OSPF. We should not set the precedent for allocating >> code-points for TLVs without any defined use or behavior. >> <SH2> Early code points are taken and implementations underway for other >> applications. >> “Implementations MUST support sending and receiving generic metric >> sub-TLV in ASLA encodings as well as in the TLV 22/extended link LSA/TE-LSAs. >> The usage of a generic metric by an individual application is subject >> to the same rules that apply to other link attributes defined in respective >> standards.” >> The above text clarifies the use of generic metric by individual >> application. >> 3) Please introduce a reserved field to pad the OSPF FAEMD sub-TLV >> to a 4 octet boundary as is the convention in OSPF - >> https://urldefense.com/v3/__https://www.ietf.org/archive/id/draft-iet >> f-lsr-flex-algo-bw-con-08.html*section-3.2.2__;Iw!!NEt6yMaO-gk!BeudAt >> ZGk7-XssYqte2dyPuiegf-oXoroaYsXYyIEJLEdZf1Bh4Jn5Mopid4VlitSAJoWvYiC0b >> PAdftNfDjHQ$ >> <SH> OK >> KT> Thanks. >> 4) In section 3.2.2 there is the following text for OSPF. Could you >> please use the TLV/sub-TLV name? OSPF folks are not good at remembering >> numbers ;-) The Min Unidirectional Link Delay as advertised by sub-sub-TLV >> 12 of ASLA sub-TLV [RFC8920], MUST be compared against the Maximum delay >> advertised in the FAEMD sub-TLV. >> <SH> changed to “The Unidirectional Link Delay as advertised by sub-sub-TLV >> 12” >> KT> Perhaps my comment was not clear. The following text would be more >> accurate: >> The Min Delay value advertised via the Min/Max Unidirectional Link Delay >> sub-TLV [RFC7471] of the ASLA sub-TLV [RFC8920], MUST be compared against >> the Maximum delay advertised in the FAEMD sub-TLV. >> <SH2> I think there is a misunderstanding here. You are proposing to use >> sub-tlv 13 where as the text in the draft clearly proposes to use sub-tlv >> 12. This probably justifies why it is important to specify sub-tlv number >> And not just name. 5) Do we want to call out that the reference bandwidth >> approach requires a router to compute and maintain a per link per algo >> bandwidth metric for every link in that algo topology. It may not be very >> obvious to some. >> <SH> updated as below >> “Advertising >> the reference bandwidth in the FAD constraints allows the metric >> computation to be done on every node for each link. >> The metric is computed using reference bandwidth and the advertised link >> bandwidth. >> Centralized control of this >> reference bandwidth simplifies management in the case that the >> reference bandwidth changes” >> KT> The above text is not really needed IMHO. My point was more about the >> implementation detail - for the flexalgo computation, we need to maintain >> this info on a per link per algo topology basis in the link-state data store >> used for path computation. I will leave it to the authors if this is needed >> or is obviously clear to implementers. >> <SH2> I don’t see the need to add implementation specific details. >> 6) There are a lot of procedures which are common to both OSPF and ISIS >> and are repeated in each section instead of a common section. It would be >> easier (and avoid errors) if there was some consolidation. >> https://urldefense.com/v3/__https://www.rfc-editor.org/rfc/rfc9350.html*section-5__;Iw!!NEt6yMaO-gk!BeudAtZGk7-XssYqte2dyPuiegf-oXoroaYsXYyIEJLEdZf1Bh4Jn5Mopid4VlitSAJoWvYiC0bPAdfXkvmp9A$ >> provides a good reference for such an organization of text. >> <SH> There is repetition in some cases but its not much so it seems to me >> leaving it as is for clarity may be better. >> KT> This is an editorial comment so I leave it to the authors. My concern >> is that great care/diligence is required through the rest of the publication >> process to ensure that when anything is changed or updated for one IGP, it >> is done appropriately for the other as well - it may be copy/paste case when >> the change is IGP agnostic but may need careful consideration when related >> to the specific IGP mechanics. >> 7) Regarding >> https://urldefense.com/v3/__https://www.ietf.org/archive/id/draft-ietf-lsr-flex-algo-bw-con-08.html*section-6__;Iw!!NEt6yMaO-gk!BeudAtZGk7-XssYqte2dyPuiegf-oXoroaYsXYyIEJLEdZf1Bh4Jn5Mopid4VlitSAJoWvYiC0bPAdezMO9Now$ >> , it seems like we want to retain a numbering ordering of rules/sequence >> for flex-algo as extension documents are introduced. Am I correct? If so, >> then this document should formally "update" RFC9350 since it is changing the >> "set of rules/sequence" for FlexAlgo computations. Further such extensions >> will also need to keep updating the base spec similarly. I would suggest >> that a full set of rules that is a union of what is in RFC9350 and rules >> added by this draft are maintained in an Appendix section. Other documents >> in the future can similarly maintain the latest set of rules. >> <SH> This draft is adding 2 new rules at the end of existing rules. Its not >> modifying or changing the order. >> I don’t see what value it is going to add by repeating the set of rules in >> Appendix. >> KT> What happens when another FlexAlgo document adds more rules? What >> happens when some FlexAlgo document wants to insert rules in the middle of >> existing ones instead of appending at the end? My point is that if there is >> a desire to establish a "live" set of rules in specific orders, then we need >> to leave a trail of document "updates" on the base FlexAlgo that one can >> refer to know how these "live set of rules" are getting "updated" by this >> and future documents. I am thinking of this on lines similar to an update >> for an FSM. >> <SH2> It’s a matter of choice. For ex RFC 8029 >> Has so many updates to the Rules but each update only lists the >> changes. >> I am fine with whatever WG decides to do. >> I want to hear if anyone in WG has an opinion on adding Appendix. >> Thanks, >> Ketan >> 8) Please fix idnits warnings - some are related to obsolete references >> while others are related to formatting. There are also some spelling/grammar >> errors. >> <SH> ok >> Thanks, >> Ketan >> On Tue, Feb 20, 2024 at 3:56 AM Acee Lindem <acee.lin...@gmail.com> wrote: >> >> This starts the Working Group Last call for >> draft-ietf-lsr-flex-algo-bw-con-07. At least some of the flex algorithm >> enhancements described in the document have been implemented. >> >> Please send your support or objection to this before March 5th, 2024. >> >> Thanks, >> Acee >> _______________________________________________ >> Lsr mailing list >> Lsr@ietf.org >> https://urldefense.com/v3/__https://www.ietf.org/mailman/listinfo/lsr >> __;!!NEt6yMaO-gk!BeudAtZGk7-XssYqte2dyPuiegf-oXoroaYsXYyIEJLEdZf1Bh4J >> n5Mopid4VlitSAJoWvYiC0bPAdfJo6SZLw$ >> _______________________________________________ >> Lsr mailing list >> Lsr@ietf.org >> https://urldefense.com/v3/__https://www.ietf.org/mailman/listinfo/lsr >> __;!!NEt6yMaO-gk!BeudAtZGk7-XssYqte2dyPuiegf-oXoroaYsXYyIEJLEdZf1Bh4J >> n5Mopid4VlitSAJoWvYiC0bPAdfJo6SZLw$ > > _______________________________________________ > Lsr mailing list > Lsr@ietf.org > https://urldefense.com/v3/__https://www.ietf.org/mailman/listinfo/lsr_ > _;!!NEt6yMaO-gk!BeudAtZGk7-XssYqte2dyPuiegf-oXoroaYsXYyIEJLEdZf1Bh4Jn5Mopid4VlitSAJoWvYiC0bPAdfJo6SZLw$ _______________________________________________ Lsr mailing list -- lsr@ietf.org To unsubscribe send an email to lsr-le...@ietf.org
