Hi Douglas,
The autobuilder covers enough target platforms that are close enough to
what you need.
The problems you're running into are very basic setup problems (e.g. no
network), so before trying to debug ltib itself, get the basic setup
working.
You should be able to select any platform your want to build and run
it. If you can't download from the GPP, you're dead in the water.
Regards, Stuart
On 03/08/11 19:19, Douglas Peterson wrote:
I noticed that neither of the two packages that use the
'tc-fsl-x86lnx-e300c3-4.1.78-1.i386.rpm' toolchain are built by this
autobuilder.
Freescale MPC837xE MDS development board (config/platform/mpc837xemds)
Freescale MPC512x based boards (config/platform/mpc5121ads)
Is it possible to get one of these added?
Douglas
From: [email protected]
[mailto:[email protected]] On Behalf Of
autobuilder
Sent: Wednesday, August 03, 2011 10:51 AM
To: ltib-users
Subject: [Ltib] Build results for 20110803
ep93xx
imx31ads
mpc5200
mpc82xx
mpc8349itx
mpc8548cds
phy3250
qs875s
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/ltib
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/ltib
