******************************************************************************************************************** 1) This is the uboot error I get by just copying the imx directory to the CVS tree:
Processing: u-boot ==================== Build path taken because: no prebuilt rpm, Testing network connectivity for gpp OK GPP: is available Try u-boot-2009.08.tar.bz2.md5 from the GPP 21:04:08 URL:http://bitshrine.org/gpp/u-boot-2009.08.tar.bz2.md5 [56/56] -> "u-boot-2009.08.tar.bz2.md5" [1] Try u-boot-2009.08.tar.bz2 from the GPP 21:05:06 URL:http://bitshrine.org/gpp/u-boot-2009.08.tar.bz2 [8736849/8736849] -> "u-boot-2009.08.tar.bz2" [1] Try u-boot-v2009.08-imx_11.09.01.tar.bz2.md5 from the GPP http://bitshrine.org/gpp/u-boot-v2009.08-imx_11.09.01.tar.bz2.md5: 21:05:06 ERROR 404: Not Found. Try u-boot-v2009.08-imx_11.09.01.tar.bz2 from the GPP http://bitshrine.org/gpp/u-boot-v2009.08-imx_11.09.01.tar.bz2: 21:05:07 ERROR 404: Not Found. Can't get: u-boot-v2009.08-imx_11.09.01.tar.bz2 at ./ltib line 834. f_buildrpms() returned an error, exiting traceback: main:580 Started: Wed Aug 29 21:01:27 2012 Ended: Wed Aug 29 21:05:07 2012 Elapsed: 220 seconds VERSION : 11.4.1 CVS_VERSION : $Revision: 1.88 $ (Savannah) PLATFORM : imx51 GNUTARCH : arm TOOLCHAIN : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp These packages failed to build: u-boot ******************************************************************************************************************** 2) Next I copy from BSP packages directory (uboot and kernel files) to the CVS tree (Sources) and I u-boot appear to build and the kernel bulds for quite some time prior to failing with the following message: Assembler messages: Error: unknown architecture `armv7-a' Error: unrecognized option -march=armv7-a make[2]: *** [scripts/mod/empty.o] Error 1 make[2]: *** Waiting for unfinished jobs.... HOSTCC scripts/genksyms/parse.o HOSTLD scripts/genksyms/genksyms make[1]: *** [scripts/mod] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [scripts] Error 2 error: Bad exit status from /home/rich/imx53/ltib/tmp/rpm-tmp.3262 (%build) RPM build errors: Bad exit status from /home/rich/imx53/ltib/tmp/rpm-tmp.3262 (%build) Build time for kernel-2.6.35: 361 seconds Failed building kernel-2.6.35 f_buildrpms() returned an error, exiting traceback: main:580 Started: Wed Aug 29 21:20:06 2012 Ended: Wed Aug 29 21:27:19 2012 Elapsed: 433 seconds VERSION : 11.4.1 CVS_VERSION : $Revision: 1.88 $ (Savannah) PLATFORM : imx51 GNUTARCH : arm TOOLCHAIN : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp These packages failed to build: kernel-2.6.35 Build Failed On Wed, Aug 29, 2012 at 1:47 PM, Bair, Richard <[email protected]> wrote: > Hello and thanks for reading! > > I'm new to the imx53 QSB and that processor family in general. I have two > questions/issues: > > ITEM 1 > ====== > I've successfully installed the CVS update of LTIB on Ubuntu 12.04 based on > support from this list. I was able to successfully build uboot and a > 2.6.22-mx kernel selecting one of the supported platforms (imx31 ads). > > The issue I have is that the platform for the imx53 is not available by > default in the CVS and that's my current target. I've been somewhat > successful getting the imx53 and im5x "menu items" to appear when I copy from > the BSP tree to the CVS tree. Specifically, I copy: > > /home/rich/imx53/L2.6.35_11.09.01_ER/L2.6.35_11.09.01_ER_source/ltib/config/platform/imx > > to the CVS build tree. Again, this allows me to pick "imx Reference Boards" > and an "im5x" platform when I run ./ltib. However, typically uboot will > build and the kernel will fail (I'll post the message later today). > > a) Is there a process for integrating imx53 BSP support into the main CVS? > How? The integration may have to come from Freescale due to license restrictions. Even if you wanted to integrate it, you may not be allowed to distribute it [to us]. Now that Freescale requires a login to get to their bsp's, I would not give out whatever I downloaded unless I had specific permission to do so (that's just me). Stuart may be able to provide some more insight to the process if one exists. > b) I also request support on the error message (again, will post near-term) > > ITEM 2 > ====== > Once I have built /rootfs, is there a script for copying to the uSD card? So > far I've only created the uSD card using the windows application: > MCIMX535-START-R-BSP-11-09_C.exe. You may have to dig into your bsp package but for my board there were instructions on how to format and copy files-systems to flash, sd or hd. i've use one called /root/diskinit-1.2.sh. Generally these type of short scripts either tftp the disk image or mount the host nfs share and the contents are simply copied. Nothing special about it. > > Any advice you could offer would be appreciated. > > Thanks, > Rich _______________________________________________ LTIB home page: http://ltib.org Ltib mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/ltib _______________________________________________ LTIB home page: http://ltib.org Ltib mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/ltib
