On Fri, May 24, 2013 at 10:39 AM, Stuart Hughes <[email protected]> wrote: > Hi Mike, > > Sorry for not replying earlier, the build results get filtered and put > into a separate folder. > > The way the auto-builder works, all packages (nearly) are enable for all > platforms in the auto-builder. That explains why they are not enabled > in your default configuration (they are not in the defaults). > > I need to look into what the exact failure is for that board (or at > least refresh my memory). Some of the issues are related to the build > environment; we deliberately use an old host OS which IIRC causes some > failures. If I get a chance I'll get back to you and try to resolve > what I'm seeing. > > BTW: it's helpful to get feedback on this.
How old is this build environment? The oldest machine I run it on is OpenSuse 10.2 from 2006. No need to poke into this particular platform, as it seems that avahi fails on all platforms and likely just missing a host package. Nothing critical, just had a few minutes to try it out. Tried the gstreamer stuff also, and it appears to have ordering issues. Plus, I'm seeing a few packages that are testing host side items instead of using a proper cross-compile test in configure, but I suspect this fairly typical. > Regards, Stuart > > > On 21/05/13 15:04, Mike Goins wrote: >> I was curious about the failure list from the autobuilder. Since we >> use an mpc837x based system and a user of avahi, I thought I would try >> to see the error(s). >> >> When I selected the mpc837xemds platform, avahi was not selected by >> default and had no issues building. clamav and the others marked x >> were not selected either. >> >> >> On Sun, May 19, 2013 at 10:31 AM, autobuilder <[email protected]> wrote: >>> BSP package build failures on Sun May 19 13:11:59 2013 GMT from skywalker >>> start time end time elapsed >>> Fri May 17 23:03:00 2013 GMT Sun May 19 13:11:59 2013 GMT 137339 seconds >>> For full build results and other information click here and then navigate to >>> Resources/Autobuilder Results >>> KEY: x : Failed, failed last time, + : Failed, new failure, - : Changed from >>> fail to pass >>> Package >>> ep93xximx31adsmpc5200mpc82xxmpc8349itxmpc837xemdsmpc8548cdsphy3250qs875s >>> DirectFB x >>> DirectFB-examples x >>> alsa-libx x >>> avahixxxxxxxxx >>> btcs x >>> clamavxxxxxxxxx >>> dbus x >>> e2fsprogs x >>> gst-plugins-badxxxxxxxxx >>> gst-plugins-basexxxxxxxxx >>> gst-plugins-goodxxxxxxxxx >>> gst-plugins-uglyxxxxxxxxx >>> iozonex x >>> kernel-2.6.23-mpc8548 x >>> liboil x >>> microwindowsxx x >>> nss-mdnsx x >>> peak-linux-driver x >>> rpmx x >>> samba x >>> util-linux x >>> >>> _______________________________________________ >>> LTIB home page: http://ltib.org >>> >>> Ltib mailing list >>> [email protected] >>> https://lists.nongnu.org/mailman/listinfo/ltib >>> >> >> _______________________________________________ >> LTIB home page: http://ltib.org >> >> Ltib mailing list >> [email protected] >> https://lists.nongnu.org/mailman/listinfo/ltib >> _______________________________________________ LTIB home page: http://ltib.org Ltib mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/ltib
