Hey,
Subrata Modak wrote:
> Yes, that should be the way i think. Whenever there is some patch
> regarding openposix or openhpi, please send the same to their
> development mailing list, so that they can apply the same. Once, they do
> it, then in LTP we can follow suit. But, nevertheless, keep sending the
> patches to ltp as well. We will see that the changes in Openposix or
> Openhpi are not lost even if they are not timely applied their in their
> respective development lists. We will synchronize the changes here.
Well, I had no luck with the patches at mailinglist posixtest-discuss.
It seems nobody cares. However can you apply the patches to your LTP?
I attached the patch again, now in a better format :)
Regards,
--
Patrick Kirsch - Quality Assurance Department
SUSE Linux Products GmbH GF: Markus Rex, HRB 16746 (AG Nuernberg)
--- testcases/open_posix_testsuite/conformance/interfaces/sem_close/1-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_close/1-1.c
@@ -28,7 +28,7 @@
int main()
{
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_close/2-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_close/2-1.c
@@ -28,7 +28,7 @@
int main()
{
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_close/3-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_close/3-1.c
@@ -30,7 +30,7 @@
int main()
{
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/1-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/1-1.c
@@ -29,7 +29,7 @@
int main() {
- char semname[20];
+ char semname[28];
sem_t *mysemp;
int val;
--- testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/2-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/2-1.c
@@ -26,7 +26,7 @@
int main() {
- char semname[20];
+ char semname[28];
sem_t *mysemp;
int val;
--- testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/4-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/4-1.c
@@ -28,7 +28,7 @@
int main() {
- char semname[20];
+ char semname[28];
sem_t *mysemp;
int val;
--- testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/5-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_getvalue/5-1.c
@@ -27,7 +27,7 @@
int main() {
- char semname[20];
+ char semname[28];
sem_t *mysemp;
int val;
--- testcases/open_posix_testsuite/conformance/interfaces/sem_open/1-4.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_open/1-4.c
@@ -28,7 +28,7 @@
int main()
{
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_post/1-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_post/1-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
int val;
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_post/1-2.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_post/1-2.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
int val;
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_post/2-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_post/2-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_post/4-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_post/4-1.c
@@ -28,7 +28,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_post/5-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_post/5-1.c
@@ -38,7 +38,7 @@
sem_t *gsemp;
int main() {
- char semname[20];
+ char semname[28];
int val;
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_post/6-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_post/6-1.c
@@ -45,7 +45,7 @@
}
int main() {
- char semname[20];
+ char semname[28];
struct sigaction act;
int val;
--- testcases/open_posix_testsuite/conformance/interfaces/sem_post/8-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_post/8-1.c
@@ -47,8 +47,8 @@
#define FUNCTION "sem_wait"
#define ERROR_PREFIX "unexpected error: " FUNCTION " " TEST ": "
-static char semname[20];
-static char semname_1[20]; /* Used to record state */
+static char semname[28];
+static char semname_1[28]; /* Used to record state */
/* set my schedule priority to @priority */
int set_my_prio(int priority)
--- testcases/open_posix_testsuite/conformance/interfaces/sem_unlink/1-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_unlink/1-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_unlink/2-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_unlink/2-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_unlink/4-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_unlink/4-1.c
@@ -29,7 +29,7 @@
int main() {
- char semname[20];
+ char semname[28];
sem_unlink(semname);
--- testcases/open_posix_testsuite/conformance/interfaces/sem_wait/1-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_wait/1-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
int val;
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_wait/1-2.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_wait/1-2.c
@@ -30,7 +30,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
int value = 10;
int val;
--- testcases/open_posix_testsuite/conformance/interfaces/sem_wait/11-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_wait/11-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
int val;
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_wait/12-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_wait/12-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_wait/3-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_wait/3-1.c
@@ -30,7 +30,7 @@
int main()
{
sem_t *mysemp;
- char semname[20];
+ char semname[28];
int val;
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_wait/5-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_wait/5-1.c
@@ -29,7 +29,7 @@
int main() {
sem_t *mysemp;
- char semname[20];
+ char semname[28];
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
--- testcases/open_posix_testsuite/conformance/interfaces/sem_wait/7-1.c
+++ testcases/open_posix_testsuite/conformance/interfaces/sem_wait/7-1.c
@@ -36,7 +36,7 @@
int main()
{
sem_t *mysemp;
- char semname[20];
+ char semname[28];
int pid, status;
sprintf(semname, "/" FUNCTION "_" TEST "_%d", getpid());
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
