Hi Subrata,
I am not sure someone has reported this problem or not, but i am getting
this error while running connectors.
Below i am providing the result for different kernel version and for
different machine with last three month LTP released.
=====================================With June release
==================================
Test Start Time: Tue Sep 2 21:12:02 2008
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
Test Start Time: Tue Sep 2 21:12:02 2008
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
-----------------------------------------------
Total Tests: 1
Total Failures: 0
Kernel Version: 2.6.27-rc3-ext4-1
Machine Architecture: i686
Hostname: x330e
===========
LOG
File: /root/ltp-full-20080630/results/LTP_RUN_ON-2008_Sep_02-21h_12m_02s.log
FAILED COMMAND
File: /root/ltp-full-20080630/output/LTP_RUN_ON-2008_Sep_02-21h_12m_02s.failed
Running tests.......
<<<test_start>>>
tag=Connectors stime=1220370122
cmdline="connector_test.sh"
contacts=""
analysis=exit
initiation_status="pan(17234): execvp of 'connector_test.sh' (tag
Connectors) failed. errno:2 No such file or directory"
<<<test_output>>>
<<<execution_status>>>
duration=0 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=0
<<<test_end>>>
incrementing stop
INFO: pan reported all tests PASS
LTP Version: LTP-20080630
===================================================================
Here is the second kernel
=============================With July
Release======================================
Test Start Time: Tue Sep 2 18:58:19 2008
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
Test Start Time: Tue Sep 2 18:58:19 2008
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
-----------------------------------------------
Total Tests: 1
Total Failures: 0
Kernel Version: 2.6.27-rc3
Machine Architecture: i686
Hostname: hs40
LOG
File: /root/ltp-full-20080731/results/LTP_RUN_ON-2008_Sep_02-18h_58m_19s.log
FAILED COMMAND
File: /root/ltp-full-20080731/output/LTP_RUN_ON-2008_Sep_02-18h_58m_19s.failed
Running tests.......
<<<test_start>>>
tag=Connectors stime=1220362099
cmdline="connector_test.sh"
contacts=""
analysis=exit
initiation_status="pan(27263): execvp of 'connector_test.sh' (tag
Connectors) failed. errno:2 No such file or directory"
<<<test_output>>>
<<<execution_status>>>
duration=0 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=0
<<<test_end>>>
incrementing stop
INFO: pan reported all tests PASS
LTP Version: LTP-20080731
==========================With Latest
Release=========================================
LOG
File: /root/ltp-full-20080831/results/LTP_RUN_ON-2008_Sep_02-14h_23m_09s.log
FAILED COMMAND
File: /root/ltp-full-20080831/output/LTP_RUN_ON-2008_Sep_02-14h_23m_09s.failed
Running tests.......
<<<test_start>>>
tag=Connectors stime=1220345590
cmdline="connector_test.sh"
contacts=""
analysis=exit
initiation_status="pan(13770): execvp of 'connector_test.sh' (tag
Connectors) failed. errno:2 No such file or directory"
<<<test_output>>>
<<<execution_status>>>
duration=0 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=0
<<<test_end>>>
incrementing stop
INFO: pan reported all tests PASS
LTP Version: LTP-20080831
=======================================================================
Thanks
Rishi
On Thu, 2008-06-26 at 17:25 +0530, Subrata Modak wrote:
> Well,
>
> I just discovered something else instead. The statement:
>
> if ../../bin/tst_kvercmp 2 6 15; then \
>
> in testcases/kernel/connectors/Makefile, will not work as the
> directory:
> testcases/bin and itś corresponding contents (which also includes
> tst_kvercmp) will not be available until:
>
> make install
>
> is done.
>
> So, although the logic for
> 1) make install
> 2) ./runltp -f connectors,
>
> make work out for kernels below 2.6.15, But 1) make, will not work for
> kernels below 2.6.15
>
> I have however merged your topup patch. Since it is not included in
> default build/install/run, so it will not pose any problem presently.
> People who are sure that the corresponding libraries and the kernel
> version supports PEC, can easily go and do the build and run for the
> same.
>
> Meanwhile i also noticed some build failures even on machines which
> has kernel above 2.6.15. I hope you will also fix the same when your
> kernel patch is accepted. Till then we will test PEC as standalone
> tests. Thanks for providing such wonderful tests. This patch is also
> merged.
>
> Regards--
> Subrata
>
>
> On Thu, Jun 26, 2008 at 3:20 PM, Li Zefan <[EMAIL PROTECTED]> wrote:
>
> Subrata Modak wrote:
> > Thanks Li.
> >
> > But somehow i am not able to apply this Patch cleanly. I
> have just merged
> > your last updated Patch which adds these tests. But i have
> removed it´s
> > compilation from testcases/kernel/Makefile. Can you quickly
> take a diff of
> > the latest(now) LTP CVS and send across this patch once
> again, which
> > according to you will solve the below problems:
> >
>
>
>
> Sorry, but I can't check out LTP CVS in my company. :(
>
> And note that this patch doesn't touch
> testcases/kernel/Makefile at all.
>
>
>
> > - building failure on 2.6.16 should be fixed
> > - fix "make install" if kernel version < 2.6.15
> > - abort tests if kernel version < 2.6.15
> >
> > Regards--
> > Subrata
> >
> >
> >
> > On Thu, Jun 26, 2008 at 1:33 PM, Li Zefan
> <[EMAIL PROTECTED]> wrote:
> >
> >>>> So how about put the tests into LTP but not run by
> default, and when my
> >> patch
> >>>> is accepted (but I'm not optimistic) or Evgeniy has done
> the extension,
> >> we
> >>>> can update the tests and make it run by default.
> >>> That would be really great, rather than holding it off
> from LTP
> >>> inclusion. I would merge your last updated patch with
> little
> >>> modifications from your side. I will make sure that it
> does not run by
> >>> default until your kernel patch is through, and in that
> case, you can
> >>> send me an updated patch.
> >>>
> >> Here it is. Based on my last patch.
> >>
> >> - building failure on 2.6.16 should be fixed
> >> - fix "make install" if kernel version < 2.6.15
> >> - abort tests if kernel version < 2.6.15
> >>
> >> Signed-off-by: Li Zefan <[EMAIL PROTECTED]>
> >> ---
> >> runtest/connectors | 2 +-
> >> testcases/kernel/connectors/Makefile | 12
> ++++++++----
> >> testcases/kernel/connectors/connector_test.sh | 15
> +++++++++++++++
> >> testcases/kernel/connectors/pec/Makefile | 1 +
> >> testcases/kernel/connectors/pec/pec_listener.c | 1 +
> >> 5 files changed, 26 insertions(+), 5 deletions(-)
> >>
> >> diff -Nurp ltp-full-20080531.orig/runtest/connectors
> >> ltp-full-20080531/runtest/connectors
> >> --- ltp-full-20080531.orig/runtest/connectors 2008-06-26
> >> 15:03:31.000000000 +0800
> >> +++ ltp-full-20080531/runtest/connectors 2008-06-26
> >> 15:15:24.000000000 +0800
> >> @@ -1,2 +1,2 @@
> >> #DESCRIPTION:Netlink Connector tests
> >> -Connectors run_pec_test
> >> +Connectors connector_test.sh
> >> diff -Nurp
> >>
> ltp-full-20080531.orig/testcases/kernel/connectors/connector_test.sh
> >>
> ltp-full-20080531/testcases/kernel/connectors/connector_test.sh
> >> ---
> ltp-full-20080531.orig/testcases/kernel/connectors/connector_test.sh
> >> 1970-01-01 08:00:00.000000000 +0800
> >> +++
> ltp-full-20080531/testcases/kernel/connectors/connector_test.sh
> >> 2008-06-26 15:55:42.000000000 +0800
> >> @@ -0,0 +1,15 @@
> >> +#! /bin/sh
> >> +
> >> +if [ -z $LTPROOT ]; then
> >> + export LTPROOT="`cd ../../.. && pwd`"
> >> + export PATH="$PATH:$LTPROOT/testcases/bin"
> >> +fi
> >> +
> >> +tst_kvercmp 2 6 15
> >> +if [ $? -eq 0 ]; then
> >> + echo "Connectors 0 CONF : system doesn't support
> execution of the
> >> test"
> >> + exit 0
> >> +fi
> >> +
> >> +$LTPROOT/testcases/bin/run_pec_test
> >> +
> >> diff -Nurp
> ltp-full-20080531.orig/testcases/kernel/connectors/Makefile
> >> ltp-full-20080531/testcases/kernel/connectors/Makefile
> >> ---
> ltp-full-20080531.orig/testcases/kernel/connectors/Makefile
> 2008-06-26
> >> 15:03:31.000000000 +0800
> >> +++ ltp-full-20080531/testcases/kernel/connectors/Makefile
> 2008-06-26
> >> 15:35:32.000000000 +0800
> >> @@ -2,12 +2,16 @@ SUBDIRS = pec
> >>
> >> all:
> >> @set -e; \
> >> - if ./tst_kvercmp 2 6 15; then \
> >> + if ../../bin/tst_kvercmp 2 6 15; then \
> >> echo "system does not support process event
> connector"; \
> >> - else $(MAKE) -C pec; true; fi
> >> + else for i in $(SUBDIRS); do $(MAKE) -C $$i $@;
> done; true; fi
> >>
> >> install:
> >> - @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i
> install ; done
> >> -
> >> + @set -e; \
> >> + ln -f
> connector_test.sh ../../bin/connector_test.sh; \
> >> + chmod ugo+x connector_test.sh; \
> >> + if ../../bin/tst_kvercmp 2 6 15; then \
> >> + echo "system does not support process event
> connector"; \
> >> + else for i in $(SUBDIRS); do $(MAKE) -C $$i
> install; done; true; fi
> >> clean:
> >> @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i
> clean ; done
> >> diff -Nurp
> ltp-full-20080531.orig/testcases/kernel/connectors/pec/Makefile
> >> ltp-full-20080531/testcases/kernel/connectors/pec/Makefile
> >> ---
> ltp-full-20080531.orig/testcases/kernel/connectors/pec/Makefile
> >> 2008-06-26 15:03:31.000000000 +0800
> >> +++
> ltp-full-20080531/testcases/kernel/connectors/pec/Makefile
> 2008-06-26
> >> 15:48:44.000000000 +0800
> >> @@ -9,5 +9,6 @@ all: $(TARGETS)
> >> install:
> >> @set -e; for i in $(TARGETS) ; do ln -f
> $$i ../../../bin/$$i ; chmod
> >> +x run_pec_test ; done ;
> >> ln -f run_pec_test ../../../bin/
> >> + chmod +x run_pec_test
> >> clean:
> >> rm -f $(TARGETS)
> >> diff -Nurp
> >>
> ltp-full-20080531.orig/testcases/kernel/connectors/pec/pec_listener.c
> >>
> ltp-full-20080531/testcases/kernel/connectors/pec/pec_listener.c
> >> ---
> ltp-full-20080531.orig/testcases/kernel/connectors/pec/pec_listener.c
> >> 2008-06-26 15:03:31.000000000 +0800
> >> +++
> ltp-full-20080531/testcases/kernel/connectors/pec/pec_listener.c
> >> 2008-06-26 15:03:50.000000000 +0800
> >> @@ -31,6 +31,7 @@
> >>
> >> #include <linux/netlink.h>
> >> #include <linux/connector.h>
> >> +#define _LINUX_TIME_H
> >> #include <linux/cn_proc.h>
> >>
> >> #define PEC_MSG_SIZE (sizeof(struct cn_msg) +
> sizeof(struct proc_event))
> >>
> >>
> >>
> >>
>
> -------------------------------------------------------------------------
> >> Check out the new SourceForge.net Marketplace.
> >> It's the best place to buy or sell services for
> >> just about anything Open Source.
> >> http://sourceforge.net/services/buy/index.php
> >> _______________________________________________
> >> Ltp-list mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/ltp-list
> >>
> >>
> >
> >
>
>
>
>
>
> --
> Regards & Thanks--
> Subrata
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________ Ltp-list mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ltp-list
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
