Hi,
The following Patch adds the option to run filecaps tests from
runalltests.sh and also provisions for installation of required
libraries not present in the system. Also systematic execution of all
tests run through runalltests.sh is added.
Signed-Of-By: Subrata Modak <[EMAIL PROTECTED]>,
--
--- ltp-full-20081031/runalltests.sh.orig 2008-11-04 16:22:00.000000000
+0530
+++ ltp-full-20081031/runalltests.sh 2008-11-04 16:21:41.000000000 +0530
@@ -42,17 +42,31 @@ echo -e "******************************
echo -e
"*******************************************************************"
export LTPROOT=${PWD}
+export RUN_BALLISTA=0
+export RUN_OPENPOSIX=0
## Set this to 1 if mm-1.4.2.tar.gz is already installed in your system
## from ftp://ftp.ossp.org/pkg/lib/mm/mm-1.4.2.tar.gz
+export RUN_MM_CORE_APIS=0
export LIBMM_INSTALLED=0
## This is required if already not set to /usr/local/lib/ as
## mm-1.4.2.tar.gz gets installed at /usr/local/lib/
-export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib/
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib/:/lib/
+export PATH=$PATH:/sbin/
## Set this to 1 if libaio-0.3.92.tar.gz is already installed in your
system
## from
http://www.kernel.org/pub/linux/kernel/people/bcrl/aio/libaio-0.3.92.tar.gz
+export RUN_AIOTESTS=0
export LIBAIO_INSTALLED=0
+## Set this to 1 if libcaps-2.11 or newer is already installed in your
system
+## from
ftp://ftp.kernel.org/pub/linux/libs/security/linux-privs/libcap2, as
well as,
+## the libattr is available in the system. The kernel should also have
been built
+## with the following option: CONFIG_SECURITY_CAPABILITIES=y
+export RUN_FILECAPS=0
+export LIBCAPS_INSTALLED=0
+export LIBATTR_INSTALLED=0
+
+
export LTP_VERSION=`./runltp -e`
export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
export HARDWARE_TYPE=$(uname -i)
@@ -70,84 +84,130 @@ echo -e "Completed running Default LTP\n
## The next one i plan to run is ballista ##
## START => Test Series 2 ##
-echo -e "Running Ballista..."
-export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
-./runltp -f ballista -o
$LTP_VERSION-BALLISTA_RUN_ON-$HOSTNAME-$KERNEL_VERSION-$HARDWARE_TYPE-$TEST_START_TIME.out
-echo -e "Completed running Ballista\n\n"
+if [ $RUN_BALLISTA -eq 1 ]
+then
+ echo -e "Running Ballista..."
+ export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
+ ./runltp -f ballista -o
$LTP_VERSION-BALLISTA_RUN_ON-$HOSTNAME-$KERNEL_VERSION-$HARDWARE_TYPE-$TEST_START_TIME.out
+ echo -e "Completed running Ballista\n\n"
+fi
## END => Test Series 2 ##
## The next one i plan to run is open_posix_testsuite ##
## START => Test Series 3 ##
-echo -e "Running Open Posix Tests..."
-(cd testcases/open_posix_testsuite; make)
-echo -e "Completed running Open Posix Tests\n\n"
+if [ $RUN_OPENPOSIX -eq 1 ]
+then
+ echo -e "Running Open Posix Tests..."
+ (cd testcases/open_posix_testsuite; make)
+ echo -e "Completed running Open Posix Tests\n\n"
+fi
## END => Test Series 3 ##
## The next one i plan to run is ##
## ltp/testcases/kernel/mem/libmm/mm_core_apis ##
## START => Test Series 4 ##
-echo -e "Initializing ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
-# Check to see if User is Root
-if [ $EUID -ne 0 ]
+if [ $RUN_MM_CORE_APIS -eq 1 ]
then
- echo You need to be root to Install libmm and run
mem/libmm/mm_core_apis
- echo Aborting ltp/testcases/kernel/mem/libmm/mm_core_apis
-else
-
- if [ $LIBMM_INSTALLED -ne 1 ]
+ echo -e "Initializing
ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
+ # Check to see if User is Root
+ if [ $EUID -ne 0 ]
then
- echo Installing libmm-1.4.2 .............
- (cd /tmp; \
- wget -c ftp://ftp.ossp.org/pkg/lib/mm/mm-1.4.2.tar.gz; \
- tar -xzf mm-1.4.2.tar.gz; \
- cd mm-1.4.2; \
- ./configure && make && make install )
- rm -rf /tmp/mm-1.4.2*
- echo libmm-1.4.2 Installed .............
+ echo You need to be root to Install libmm and run
mem/libmm/mm_core_apis
+ echo Aborting ltp/testcases/kernel/mem/libmm/mm_core_apis
else
- echo libmm-1.4.2 already installed in your system
- fi
+ if [ $LIBMM_INSTALLED -ne 1 ]
+ then
+ echo Installing libmm-1.4.2 .............
+ (cd /tmp; \
+ wget -c ftp://ftp.ossp.org/pkg/lib/mm/mm-1.4.2.tar.gz; \
+ tar -xzf mm-1.4.2.tar.gz; \
+ cd mm-1.4.2; \
+ ./configure && make && make install )
+ rm -rf /tmp/mm-1.4.2*
+ echo libmm-1.4.2 Installed .............
+ else
+ echo libmm-1.4.2 already installed in your system
+ fi
echo -e "Running
ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
- (cd testcases/kernel/mem/libmm; \
- make; \
- make install; \
- $LTPROOT/testcases/bin/mm_core_apis; )
+ (cd testcases/kernel/mem/libmm; \
+ make; \
+ make install; \
+ $LTPROOT/testcases/bin/mm_core_apis; )
+ fi
+ echo -e "Completed running
ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n"
fi
-echo -e "Completed running
ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n"
## END => Test Series 4 ##
## The next one i plan to run is ##
## ltp/testcases/kernel/io/aio ##
## START => Test Series 5 ##
-echo -e "Initializing ltp/testcases/kernel/io/aio ..."
-# Check to see if User is Root
-if [ $EUID -ne 0 ]
-then
- echo You need to be root to Install libaio-0.3.92 and run
ltp/testcases/kernel/io/aio
- echo Aborting ltp/testcases/kernel/io/aio
-else
- if [ $LIBAIO_INSTALLED -ne 1 ]
+if [ $RUN_AIOTESTS -eq 1 ]
then
- echo Installing libaio-0.3.92.............
- (cd /tmp; \
- wget -c
http://www.kernel.org/pub/linux/kernel/people/bcrl/aio/libaio-0.3.92.tar.gz; \
- tar -xzf libaio-0.3.92.tar.gz; \
- cd libaio-0.3.92; \
- make > /dev/null && make install > /dev/null)
- rm -rf /tmp/libaio-0.3.92*
- echo libaio-0.3.92 Installed .............
+ echo -e "Initializing ltp/testcases/kernel/io/aio ..."
+ # Check to see if User is Root
+ if [ $EUID -ne 0 ]
+ then
+ echo You need to be root to Install libaio-0.3.92 and run
ltp/testcases/kernel/io/aio
+ echo Aborting ltp/testcases/kernel/io/aio
else
- echo libaio-0.3.92 already installed in your system
- fi
+ if [ $LIBAIO_INSTALLED -ne 1 ]
+ then
+ echo Installing libaio-0.3.92.............
+ (cd /tmp; \
+ wget -c
http://www.kernel.org/pub/linux/kernel/people/bcrl/aio/libaio-0.3.92.tar.gz; \
+ tar -xzf libaio-0.3.92.tar.gz; \
+ cd libaio-0.3.92; \
+ make > /dev/null && make install > /dev/null)
+ rm -rf /tmp/libaio-0.3.92*
+ echo libaio-0.3.92 Installed .............
+ else
+ echo libaio-0.3.92 already installed in your system
+ fi
echo -e "Building & Running ltp/testcases/kernel/io/aio..."
(cd testcases/kernel/io/aio; \
make > /dev/null; \
./aio01/aio01; \
./aio02/runfstests.sh -a aio02/cases/aio_tio; \
make clean 1>&2 > /dev/null )
- echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ fi
fi
## END => Test Series 5 ##
+
+
+## The next one i plan to run is ##
+## ltp/testcases/kernel/security/filecaps ##
+## START => Test Series 6 ##
+if [ $RUN_FILECAPS -eq 1 ]
+then
+ echo -e "Initializing ltp/testcases/kernel/security/filecaps ..."
+ # Check to see if User is Root
+ if [ $EUID -ne 0 ]
+ then
+ echo You need to be root to Install libcaps and run
ltp/testcases/kernel/security/filecaps
+ echo Aborting ltp/testcases/kernel/security/filecaps
+ else
+ if [ $LIBCAPS_INSTALLED -ne 1 ]
+ then
+ echo Installing libcaps.............
+ (cd /tmp; \
+ wget -c
ftp://ftp.kernel.org/pub/linux/libs/security/linux-privs/libcap2/libcap-2.14.tar.gz;
\
+ tar -xzf libcap-2.14.tar.gz; \
+ cd libcap-2.14; \
+ make > /dev/null && make install > /dev/null)
+ rm -rf /tmp/libcap-2.14*
+ echo libcaps Installed .............
+ else
+ echo libcaps already installed in your system
+ fi
+ echo -e "Building & Running
ltp/testcases/kernel/security/filecaps"
+ (cd ltp/testcases/kernel/security/filecaps; \
+ make && make install > /dev/null; )
+ ./runltp -f filecaps
+ echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ fi
+fi
+## END => Test Series 6 ##
Regards--
Subrata
--- ltp-full-20081031/runalltests.sh.orig 2008-11-04 16:22:00.000000000 +0530
+++ ltp-full-20081031/runalltests.sh 2008-11-04 16:21:41.000000000 +0530
@@ -42,17 +42,31 @@ echo -e "******************************
echo -e "*******************************************************************"
export LTPROOT=${PWD}
+export RUN_BALLISTA=0
+export RUN_OPENPOSIX=0
## Set this to 1 if mm-1.4.2.tar.gz is already installed in your system
## from ftp://ftp.ossp.org/pkg/lib/mm/mm-1.4.2.tar.gz
+export RUN_MM_CORE_APIS=0
export LIBMM_INSTALLED=0
## This is required if already not set to /usr/local/lib/ as
## mm-1.4.2.tar.gz gets installed at /usr/local/lib/
-export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib/
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib/:/lib/
+export PATH=$PATH:/sbin/
## Set this to 1 if libaio-0.3.92.tar.gz is already installed in your system
## from http://www.kernel.org/pub/linux/kernel/people/bcrl/aio/libaio-0.3.92.tar.gz
+export RUN_AIOTESTS=0
export LIBAIO_INSTALLED=0
+## Set this to 1 if libcaps-2.11 or newer is already installed in your system
+## from ftp://ftp.kernel.org/pub/linux/libs/security/linux-privs/libcap2, as well as,
+## the libattr is available in the system. The kernel should also have been built
+## with the following option: CONFIG_SECURITY_CAPABILITIES=y
+export RUN_FILECAPS=0
+export LIBCAPS_INSTALLED=0
+export LIBATTR_INSTALLED=0
+
+
export LTP_VERSION=`./runltp -e`
export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
export HARDWARE_TYPE=$(uname -i)
@@ -70,84 +84,130 @@ echo -e "Completed running Default LTP\n
## The next one i plan to run is ballista ##
## START => Test Series 2 ##
-echo -e "Running Ballista..."
-export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
-./runltp -f ballista -o $LTP_VERSION-BALLISTA_RUN_ON-$HOSTNAME-$KERNEL_VERSION-$HARDWARE_TYPE-$TEST_START_TIME.out
-echo -e "Completed running Ballista\n\n"
+if [ $RUN_BALLISTA -eq 1 ]
+then
+ echo -e "Running Ballista..."
+ export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
+ ./runltp -f ballista -o $LTP_VERSION-BALLISTA_RUN_ON-$HOSTNAME-$KERNEL_VERSION-$HARDWARE_TYPE-$TEST_START_TIME.out
+ echo -e "Completed running Ballista\n\n"
+fi
## END => Test Series 2 ##
## The next one i plan to run is open_posix_testsuite ##
## START => Test Series 3 ##
-echo -e "Running Open Posix Tests..."
-(cd testcases/open_posix_testsuite; make)
-echo -e "Completed running Open Posix Tests\n\n"
+if [ $RUN_OPENPOSIX -eq 1 ]
+then
+ echo -e "Running Open Posix Tests..."
+ (cd testcases/open_posix_testsuite; make)
+ echo -e "Completed running Open Posix Tests\n\n"
+fi
## END => Test Series 3 ##
## The next one i plan to run is ##
## ltp/testcases/kernel/mem/libmm/mm_core_apis ##
## START => Test Series 4 ##
-echo -e "Initializing ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
-# Check to see if User is Root
-if [ $EUID -ne 0 ]
+if [ $RUN_MM_CORE_APIS -eq 1 ]
then
- echo You need to be root to Install libmm and run mem/libmm/mm_core_apis
- echo Aborting ltp/testcases/kernel/mem/libmm/mm_core_apis
-else
-
- if [ $LIBMM_INSTALLED -ne 1 ]
+ echo -e "Initializing ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
+ # Check to see if User is Root
+ if [ $EUID -ne 0 ]
then
- echo Installing libmm-1.4.2 .............
- (cd /tmp; \
- wget -c ftp://ftp.ossp.org/pkg/lib/mm/mm-1.4.2.tar.gz; \
- tar -xzf mm-1.4.2.tar.gz; \
- cd mm-1.4.2; \
- ./configure && make && make install )
- rm -rf /tmp/mm-1.4.2*
- echo libmm-1.4.2 Installed .............
+ echo You need to be root to Install libmm and run mem/libmm/mm_core_apis
+ echo Aborting ltp/testcases/kernel/mem/libmm/mm_core_apis
else
- echo libmm-1.4.2 already installed in your system
- fi
+ if [ $LIBMM_INSTALLED -ne 1 ]
+ then
+ echo Installing libmm-1.4.2 .............
+ (cd /tmp; \
+ wget -c ftp://ftp.ossp.org/pkg/lib/mm/mm-1.4.2.tar.gz; \
+ tar -xzf mm-1.4.2.tar.gz; \
+ cd mm-1.4.2; \
+ ./configure && make && make install )
+ rm -rf /tmp/mm-1.4.2*
+ echo libmm-1.4.2 Installed .............
+ else
+ echo libmm-1.4.2 already installed in your system
+ fi
echo -e "Running ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
- (cd testcases/kernel/mem/libmm; \
- make; \
- make install; \
- $LTPROOT/testcases/bin/mm_core_apis; )
+ (cd testcases/kernel/mem/libmm; \
+ make; \
+ make install; \
+ $LTPROOT/testcases/bin/mm_core_apis; )
+ fi
+ echo -e "Completed running ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n"
fi
-echo -e "Completed running ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n"
## END => Test Series 4 ##
## The next one i plan to run is ##
## ltp/testcases/kernel/io/aio ##
## START => Test Series 5 ##
-echo -e "Initializing ltp/testcases/kernel/io/aio ..."
-# Check to see if User is Root
-if [ $EUID -ne 0 ]
-then
- echo You need to be root to Install libaio-0.3.92 and run ltp/testcases/kernel/io/aio
- echo Aborting ltp/testcases/kernel/io/aio
-else
- if [ $LIBAIO_INSTALLED -ne 1 ]
+if [ $RUN_AIOTESTS -eq 1 ]
then
- echo Installing libaio-0.3.92.............
- (cd /tmp; \
- wget -c http://www.kernel.org/pub/linux/kernel/people/bcrl/aio/libaio-0.3.92.tar.gz; \
- tar -xzf libaio-0.3.92.tar.gz; \
- cd libaio-0.3.92; \
- make > /dev/null && make install > /dev/null)
- rm -rf /tmp/libaio-0.3.92*
- echo libaio-0.3.92 Installed .............
+ echo -e "Initializing ltp/testcases/kernel/io/aio ..."
+ # Check to see if User is Root
+ if [ $EUID -ne 0 ]
+ then
+ echo You need to be root to Install libaio-0.3.92 and run ltp/testcases/kernel/io/aio
+ echo Aborting ltp/testcases/kernel/io/aio
else
- echo libaio-0.3.92 already installed in your system
- fi
+ if [ $LIBAIO_INSTALLED -ne 1 ]
+ then
+ echo Installing libaio-0.3.92.............
+ (cd /tmp; \
+ wget -c http://www.kernel.org/pub/linux/kernel/people/bcrl/aio/libaio-0.3.92.tar.gz; \
+ tar -xzf libaio-0.3.92.tar.gz; \
+ cd libaio-0.3.92; \
+ make > /dev/null && make install > /dev/null)
+ rm -rf /tmp/libaio-0.3.92*
+ echo libaio-0.3.92 Installed .............
+ else
+ echo libaio-0.3.92 already installed in your system
+ fi
echo -e "Building & Running ltp/testcases/kernel/io/aio..."
(cd testcases/kernel/io/aio; \
make > /dev/null; \
./aio01/aio01; \
./aio02/runfstests.sh -a aio02/cases/aio_tio; \
make clean 1>&2 > /dev/null )
- echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ fi
fi
## END => Test Series 5 ##
+
+
+## The next one i plan to run is ##
+## ltp/testcases/kernel/security/filecaps ##
+## START => Test Series 6 ##
+if [ $RUN_FILECAPS -eq 1 ]
+then
+ echo -e "Initializing ltp/testcases/kernel/security/filecaps ..."
+ # Check to see if User is Root
+ if [ $EUID -ne 0 ]
+ then
+ echo You need to be root to Install libcaps and run ltp/testcases/kernel/security/filecaps
+ echo Aborting ltp/testcases/kernel/security/filecaps
+ else
+ if [ $LIBCAPS_INSTALLED -ne 1 ]
+ then
+ echo Installing libcaps.............
+ (cd /tmp; \
+ wget -c ftp://ftp.kernel.org/pub/linux/libs/security/linux-privs/libcap2/libcap-2.14.tar.gz; \
+ tar -xzf libcap-2.14.tar.gz; \
+ cd libcap-2.14; \
+ make > /dev/null && make install > /dev/null)
+ rm -rf /tmp/libcap-2.14*
+ echo libcaps Installed .............
+ else
+ echo libcaps already installed in your system
+ fi
+ echo -e "Building & Running ltp/testcases/kernel/security/filecaps"
+ (cd ltp/testcases/kernel/security/filecaps; \
+ make && make install > /dev/null; )
+ ./runltp -f filecaps
+ echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
+ fi
+fi
+## END => Test Series 6 ##
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
