Most of the testcases, have an option (-j) which runs
the jvmsim as a background load so as to simulate the
behavior of the JVM.
This patch removes the references of jvmsim from all
the testcases.
Signed-Off-By: Chirag <[EMAIL PROTECTED]>
Acked-by: Sripathi Kodi <[EMAIL PROTECTED]>
func/async_handler/async_handler.c | 15 +--------------
func/async_handler/async_handler_jk.c | 15 +--------------
func/async_handler/async_handler_tsc.c | 16 +---------------
func/gtod_latency/gtod_infinite.c | 16 +---------------
func/gtod_latency/gtod_latency.c | 1 -
func/hrtimer-prio/hrtimer-prio.c | 14 --------------
func/matrix_mult/matrix_mult.c | 16 +---------------
func/measurement/preempt_timing.c | 16 +---------------
func/periodic_cpu_load/periodic_cpu_load.c | 15 +--------------
func/periodic_cpu_load/periodic_cpu_load_single.c | 16 +---------------
func/pi-tests/sbrk_mutex.c | 16 +---------------
func/pi-tests/test-skeleton.c | 16 +---------------
func/pi-tests/testpi-0.c | 1 -
func/pi-tests/testpi-1.c | 16 +---------------
func/pi-tests/testpi-2.c | 16 +---------------
func/pi-tests/testpi-4.c | 16 +---------------
func/pi-tests/testpi-5.c | 1 -
func/pi-tests/testpi-6.c | 1 -
func/pi-tests/testpi-7.c | 16 +---------------
func/prio-preempt/prio-preempt.c | 8 +-------
func/prio-wake/prio-wake.c | 16 +---------------
func/pthread_kill_latency/pthread_kill_latency.c | 15 +--------------
func/sched_football/sched_football.c | 16 +---------------
func/sched_jitter/sched_jitter.c | 16 +---------------
func/sched_latency/sched_latency.c | 16 +---------------
func/thread_clock/tc-2.c | 16 +---------------
perf/latency/pthread_cond_latency.c | 16 +---------------
stress/pi-tests/lookup_pi_state.c | 18 +-----------------
stress/pi-tests/testpi-3.c | 17 +----------------
29 files changed, 24 insertions(+), 369 deletions(-)
Index: ltp/testcases/realtime/func/async_handler/async_handler.c
===================================================================
--- ltp.orig/testcases/realtime/func/async_handler/async_handler.c
+++ ltp/testcases/realtime/func/async_handler/async_handler.c
@@ -26,7 +26,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -40,7 +39,6 @@
#include <stdlib.h>
#include <math.h>
#include <librttest.h>
-#include <libjvmsim.h>
#include <libstats.h>
#include <getopt.h>
@@ -53,7 +51,6 @@
static nsec_t start;
static nsec_t end;
static int iterations = 0;
-static int run_jvmsim = 0;
#define CHILD_START 0
#define CHILD_WAIT 1
@@ -70,7 +67,6 @@ void usage(void)
{
rt_help();
printf("async_handler specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -iITERATIONS number of iterations to calculate the average
over\n");
}
@@ -79,9 +75,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -181,18 +174,12 @@ int main(int argc, char *argv[])
printf("-----------------------------------\n\n");
pass_criteria = PASS_US;
- rt_init("ji:h", parse_args, argc, argv);
+ rt_init("i:h", parse_args, argc, argv);
init_pi_mutex(&mutex);
atomic_set(CHILD_START, &step);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
if (iterations == 0)
iterations = DEFAULT_ITERATIONS;
printf("Running %d iterations\n", iterations);
Index: ltp/testcases/realtime/func/async_handler/async_handler_jk.c
===================================================================
--- ltp.orig/testcases/realtime/func/async_handler/async_handler_jk.c
+++ ltp/testcases/realtime/func/async_handler/async_handler_jk.c
@@ -29,7 +29,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* John Kacur <[EMAIL PROTECTED]>
@@ -43,7 +42,6 @@
#include <stdlib.h>
#include <math.h>
#include <librttest.h>
-#include <libjvmsim.h>
#include <libstats.h>
// This is the normal priority for an event handler if not specified.
@@ -52,7 +50,6 @@
#define PASS_US 100
long start, end;
-static int run_jvmsim = 0;
/* Function Prototypes */
void *async_event_server(void *arg);
@@ -62,7 +59,6 @@ void usage(void)
{
rt_help();
printf("async_handler_jk specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -70,9 +66,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -149,13 +142,7 @@ int main(int argc, char* argv[])
setup();
pass_criteria = PASS_US;
- rt_init("jh", parse_args, argc, argv);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("h", parse_args, argc, argv);
aes_id = create_fifo_thread(async_event_server, (void*)0, 83);
server = get_thread(aes_id);
Index: ltp/testcases/realtime/func/async_handler/async_handler_tsc.c
===================================================================
--- ltp.orig/testcases/realtime/func/async_handler/async_handler_tsc.c
+++ ltp/testcases/realtime/func/async_handler/async_handler_tsc.c
@@ -29,7 +29,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -45,7 +44,6 @@
#include <stdint.h>
#include <pthread.h>
#include <librttest.h>
-#include <libjvmsim.h>
#include <libstats.h>
#define HANDLER_PRIO 98
@@ -71,13 +69,11 @@ pthread_cond_t cond = PTHREAD_COND_INITI
pthread_mutex_t mutex;
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("async_handler_tsc specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -85,9 +81,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -199,7 +192,7 @@ int main(int argc, char *argv[])
int signal_id, handler_id;
setup();
- rt_init("jh", parse_args, argc, argv);
+ rt_init("h", parse_args, argc, argv);
printf("-------------------------------\n");
printf("Asynchronous Event Handling Latency\n");
@@ -213,13 +206,6 @@ int main(int argc, char *argv[])
init_pi_mutex(&mutex);
atomic_set(CHILD_START, &step);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
handler_id = create_fifo_thread(handler_thread, (void*)0, HANDLER_PRIO);
signal_id = create_fifo_thread(signal_thread, (void*)0, SIGNAL_PRIO);
Index: ltp/testcases/realtime/func/gtod_latency/gtod_infinite.c
===================================================================
--- ltp.orig/testcases/realtime/func/gtod_latency/gtod_infinite.c
+++ ltp/testcases/realtime/func/gtod_latency/gtod_infinite.c
@@ -37,7 +37,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -52,7 +51,6 @@
#include <time.h>
#include <sched.h>
#include <librttest.h>
-#include <libjvmsim.h>
#include <sys/mman.h>
/* #define CLOCK_TO_USE CLOCK_MONOTONIC */
@@ -61,14 +59,12 @@
#define START_MAX 3000
#define REPORT_MIN 1000000
-static int run_jvmsim = 0;
static unsigned int max_window = 0; /* infinite, don't use a window */
void usage(void)
{
rt_help();
printf("gtod_infinite specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -wWINDOW iterations in max value window (default
inf)\n");
}
@@ -76,9 +72,6 @@ int parse_args(int c, char *v)
{
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -113,14 +106,7 @@ int main(int argc, char *argv[])
exit(1);
}
*/
- rt_init("jhw:", parse_args, argc, argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init();
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("hw:", parse_args, argc, argv);
mlockall(MCL_CURRENT|MCL_FUTURE);
Index: ltp/testcases/realtime/func/gtod_latency/gtod_latency.c
===================================================================
--- ltp.orig/testcases/realtime/func/gtod_latency/gtod_latency.c
+++ ltp/testcases/realtime/func/gtod_latency/gtod_latency.c
@@ -30,7 +30,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
Index: ltp/testcases/realtime/func/hrtimer-prio/hrtimer-prio.c
===================================================================
--- ltp.orig/testcases/realtime/func/hrtimer-prio/hrtimer-prio.c
+++ ltp/testcases/realtime/func/hrtimer-prio/hrtimer-prio.c
@@ -29,7 +29,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -43,7 +42,6 @@
#include <stdlib.h>
#include <math.h>
#include <librttest.h>
-#include <libjvmsim.h>
#include <libstats.h>
#define DEF_MED_PRIO 60 // (softirqd-hrtimer,98)
@@ -53,7 +51,6 @@
#define DEF_SLEEP_TIME 10000 // Duration of nanosleep in nanoseconds
#define DEF_CRITERIA 10 // maximum timer latency in microseconds
-static int run_jvmsim = 0;
static int med_prio = DEF_MED_PRIO;
static int high_prio;
static int busy_time = DEF_BUSY_TIME;
@@ -69,7 +66,6 @@ void usage(void)
{
rt_help();
printf("hrtimer-prio specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -t# #:busy work time in ms, defaults to %d ms\n",
DEF_BUSY_TIME);
printf(" -i# #:number of iterations, defaults to %d\n",
DEF_ITERATIONS);
printf(" -n# #:number of busy threads, defaults to
NR_CPUS*2\n");
@@ -82,9 +78,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -175,13 +168,6 @@ int main(int argc, char *argv[])
printf("Busy thread priority: %d\n", med_prio);
printf("Timer thread priority: %d\n", high_prio);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
stats_container_t hist;
stats_quantiles_t quantiles;
if (stats_container_init(&dat, iterations)) {
Index: ltp/testcases/realtime/func/matrix_mult/matrix_mult.c
===================================================================
--- ltp.orig/testcases/realtime/func/matrix_mult/matrix_mult.c
+++ ltp/testcases/realtime/func/matrix_mult/matrix_mult.c
@@ -26,7 +26,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -41,7 +40,6 @@
#include <stdlib.h>
#include <math.h>
#include <librttest.h>
-#include <libjvmsim.h>
#include <libstats.h>
#define MAX_CPUS 8192
@@ -60,7 +58,6 @@
#define THREAD_SLEEP 1 * NS_PER_US
-static int run_jvmsim = 0;
static int ops = DEF_OPS;
static int numcpus;
static float criteria;
@@ -79,7 +76,6 @@ void usage(void)
{
rt_help();
printf("matrix_mult specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -l# #: number of multiplications per iteration
(load)\n");
printf(" -i# #: number of iterations\n");
}
@@ -88,9 +84,6 @@ int parse_args(int c, char *v)
{
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'i':
iterations = atoi(v);
break;
@@ -317,7 +310,7 @@ int main(int argc, char *argv[])
{
setup();
pass_criteria = PASS_CRITERIA;
- rt_init("jl:i:h", parse_args, argc, argv);
+ rt_init("l:i:h", parse_args, argc, argv);
numcpus = sysconf(_SC_NPROCESSORS_ONLN);
/* the minimum avg concurrent multiplier to pass */
criteria = pass_criteria * numcpus;
@@ -348,13 +341,6 @@ int main(int argc, char *argv[])
printf("Calculations per iteration: %d\n", ops);
printf("Number of CPUs: %u\n", numcpus);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); /* Start the JVM simulation */
- } else {
- printf("jvmsim disabled\n");
- }
-
set_priority(PRIO);
main_thread();
Index: ltp/testcases/realtime/func/measurement/preempt_timing.c
===================================================================
--- ltp.orig/testcases/realtime/func/measurement/preempt_timing.c
+++ ltp/testcases/realtime/func/measurement/preempt_timing.c
@@ -32,7 +32,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
@@ -53,19 +52,16 @@
#include <sys/mman.h>
#include <stdint.h>
#include <librttest.h>
-#include <libjvmsim.h>
#define ITERATIONS 1000000ULL
#define INTERVALS 10
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("preempt_timing specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -73,9 +69,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -97,14 +90,7 @@ int main(int argc, char *argv[])
min = -1;
setup();
- rt_init("jh",parse_args,argc,argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("h",parse_args,argc,argv);
/* switch to SCHED_FIFO 99 */
param.sched_priority = sched_get_priority_max(SCHED_FIFO);
Index: ltp/testcases/realtime/func/periodic_cpu_load/periodic_cpu_load.c
===================================================================
--- ltp.orig/testcases/realtime/func/periodic_cpu_load/periodic_cpu_load.c
+++ ltp/testcases/realtime/func/periodic_cpu_load/periodic_cpu_load.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -40,7 +39,6 @@
#include <math.h>
#include <librttest.h>
#include <libstats.h>
-#include <libjvmsim.h>
#define PRIO_A 63
#define PRIO_B 53
@@ -68,7 +66,6 @@ stats_container_t dat[THREADS_PER_GROUP
stats_quantiles_t quantiles[THREADS_PER_GROUP * NUM_GROUPS];
static const char groupname[NUM_GROUPS] = "ABC";
-static int run_jvmsim = 0;
static int iterations = ITERATIONS;
static int ret = 0;
@@ -77,15 +74,12 @@ void usage(void)
rt_help();
printf("periodic_cpu_load specific options:\n");
printf(" -iITERATIONS number of iterations to calculate the average
over\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
{
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
break;
case 'i':
iterations = atoi(v);
@@ -170,7 +164,7 @@ int main(int argc, char *argv[])
int i;
setup();
- rt_init("jhi:", parse_args, argc, argv);
+ rt_init("hi:", parse_args, argc, argv);
if (iterations < 100) {
fprintf(stderr, "Number of iteration cannot be less than
100.\n");
@@ -195,13 +189,6 @@ int main(int argc, char *argv[])
printf(" period: %d ms\n", PERIOD_C/NS_PER_MS);
printf("\n");
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
for (i=0; i<(THREADS_PER_GROUP * NUM_GROUPS); i++) {
stats_container_init(&dat[i], iterations);
stats_quantiles_init(&quantiles[i], (int)log10(iterations));
Index: ltp/testcases/realtime/func/periodic_cpu_load/periodic_cpu_load_single.c
===================================================================
---
ltp.orig/testcases/realtime/func/periodic_cpu_load/periodic_cpu_load_single.c
+++ ltp/testcases/realtime/func/periodic_cpu_load/periodic_cpu_load_single.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -40,7 +39,6 @@
#include <math.h>
#include <librttest.h>
#include <libstats.h>
-#include <libjvmsim.h>
#define HIST_BUCKETS 100
@@ -55,7 +53,6 @@
static int prio;
static int period;
static int calc_loops;
-static int run_jvmsim = 0;
static int ret = 0;
static char *filename_prefix = DEFAULT_FILENAME_PREFIX;
static int iterations = DEFAULT_ITERATIONS;
@@ -67,7 +64,6 @@ void usage(void)
printf(" -lCALC_LOOPS loops per iteration\n");
printf(" -fFILENAME_PREFIX filename prefix for plot output\n");
printf(" -iITERATIONS number of iterations to calculate the average
over\n");
- printf(" -j enable jvmsim\n");
printf(" -r[0-99] real-time priority\n");
printf(" -tPERIOD period in ms\n");
}
@@ -175,9 +171,6 @@ int parse_args(int c, char *v)
case 'i':
iterations = atoi(v);
break;
- case 'j':
- run_jvmsim = 1;
- break;
case 'r':
prio = atoi(v);
break;
@@ -198,7 +191,7 @@ int main(int argc, char *argv[])
calc_loops = DEFAULT_CALC_LOOPS;
setup();
- rt_init("f:jhi:r:t:l:", parse_args, argc, argv);
+ rt_init("f:hi:r:t:l:", parse_args, argc, argv);
if (iterations < 100) {
printf("Number of iterations cannot be less than 100\n");
@@ -221,13 +214,6 @@ int main(int argc, char *argv[])
printf(" loops: %d\n", calc_loops);
printf(" logs: %s*\n", filename_prefix);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
ret = periodic_thread(period, iterations, calc_loops);
return ret;
Index: ltp/testcases/realtime/func/pi-tests/testpi-0.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/testpi-0.c
+++ ltp/testcases/realtime/func/pi-tests/testpi-0.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
Index: ltp/testcases/realtime/func/pi-tests/testpi-1.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/testpi-1.c
+++ ltp/testcases/realtime/func/pi-tests/testpi-1.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
@@ -44,16 +43,13 @@
#include <sys/syscall.h>
#include <unistd.h>
#include <librttest.h>
-#include <libjvmsim.h>
-static int run_jvmsim=0;
pthread_barrier_t barrier;
void usage(void)
{
rt_help();
printf("testpi-1 specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -61,9 +57,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -204,20 +197,13 @@ int main(int argc, char* argv[]) {
CPU_SET(0, &mask);
setup();
- rt_init("jh",parse_args,argc,argv);
+ rt_init("h",parse_args,argc,argv);
if ((retc = pthread_barrier_init(&barrier, NULL, 5))) {
printf("pthread_barrier_init failed: %s\n", strerror(retc));
exit(retc);
}
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
retc = sched_setaffinity(0, sizeof(mask), &mask);
if (retc < 0) {
printf("Main Thread: Can't set affinity: %d %s\n", retc, strerror(retc));
Index: ltp/testcases/realtime/func/pi-tests/testpi-2.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/testpi-2.c
+++ ltp/testcases/realtime/func/pi-tests/testpi-2.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
@@ -44,16 +43,13 @@
#include <sys/syscall.h>
#include <unistd.h>
#include <librttest.h>
-#include <libjvmsim.h>
-static int run_jvmsim=0;
pthread_barrier_t barrier;
void usage(void)
{
rt_help();
printf("testpi-2 specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -61,9 +57,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -203,20 +196,13 @@ int main(int argc, char* argv[]) {
CPU_ZERO(&mask);
CPU_SET(0, &mask);
setup();
- rt_init("jh",parse_args,argc,argv);
+ rt_init("h",parse_args,argc,argv);
if ((retc = pthread_barrier_init(&barrier, NULL, 5))) {
printf("pthread_barrier_init failed: %s\n", strerror(retc));
exit(retc);
}
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
retc = sched_setaffinity(0, sizeof(mask), &mask);
if (retc < 0) {
printf("Main Thread: Can't set affinity: %d %s\n", retc, strerror(retc));
Index: ltp/testcases/realtime/func/pi-tests/testpi-4.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/testpi-4.c
+++ ltp/testcases/realtime/func/pi-tests/testpi-4.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
@@ -45,16 +44,13 @@
#include <sys/syscall.h>
#include <unistd.h>
#include <librttest.h>
-#include <libjvmsim.h>
-static int run_jvmsim=0;
pthread_barrier_t barrier;
void usage(void)
{
rt_help();
printf("testpi-4 specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -62,9 +58,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -204,20 +197,13 @@ int main(int argc, char* argv[]) {
CPU_SET(0, &mask);
setup();
- rt_init("jh",parse_args,argc,argv);
+ rt_init("h",parse_args,argc,argv);
if ((retc = pthread_barrier_init(&barrier, NULL, 5))) {
printf("pthread_barrier_init failed: %s\n", strerror(retc));
exit(retc);
}
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
retc = sched_setaffinity(0, sizeof(mask), &mask);
if (retc < 0) {
printf("Main Thread: Can't set affinity: %d %s\n", retc, strerror(retc));
Index: ltp/testcases/realtime/func/pi-tests/testpi-5.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/testpi-5.c
+++ ltp/testcases/realtime/func/pi-tests/testpi-5.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
Index: ltp/testcases/realtime/func/pi-tests/testpi-6.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/testpi-6.c
+++ ltp/testcases/realtime/func/pi-tests/testpi-6.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
Index: ltp/testcases/realtime/func/pi-tests/testpi-7.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/testpi-7.c
+++ ltp/testcases/realtime/func/pi-tests/testpi-7.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -42,7 +41,6 @@
#include <stdlib.h>
#include <math.h>
#include <librttest.h>
-#include <libjvmsim.h>
#define HIGH_PRIO 15
#define MED_PRIO 10
@@ -74,14 +72,12 @@ static volatile phase_t phase_flag = END
static pthread_mutex_t flag_mutex;
int med_threads = 0;
-static int run_jvmsim=0;
long iterations = ITERATIONS;
void usage(void)
{
rt_help();
printf("testpi-7 specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -i# #: number of iterations\n");
printf(" -f #: Use flag mutex\n");
printf(" -m# #:number of mid priority threads\n");
@@ -91,9 +87,6 @@ int parse_args(int c, char *v)
{
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim=1;
- break;
case 'h':
usage();
exit(0);
@@ -253,14 +246,7 @@ int main(int argc, char *argv[])
int i,numcpus;
setup();
- rt_init("jhfi:m:", parse_args, argc, argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("hfi:m:", parse_args, argc, argv);
if (!med_threads) {
printf("This test requires that at least NRCPUS medium priority
threads run\n");
Index: ltp/testcases/realtime/func/pi-tests/sbrk_mutex.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/sbrk_mutex.c
+++ ltp/testcases/realtime/func/pi-tests/sbrk_mutex.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -45,7 +44,6 @@
#include <errno.h>
#include <unistd.h>
#include <librttest.h>
-#include <libjvmsim.h>
#define NUM_MUTEXES 5000
#define NUM_THREADS 50
@@ -54,13 +52,11 @@
static pthread_mutex_t *mutexes[NUM_MUTEXES];
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("sbrk_mutex specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -68,9 +64,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -110,14 +103,7 @@ int main(int argc, char* argv[])
pthread_mutexattr_t mutexattr;
setup();
- rt_init("jh",parse_args,argc,argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("h",parse_args,argc,argv);
if (pthread_mutexattr_init(&mutexattr) != 0) {
printf("Failed to init mutexattr\n");
Index: ltp/testcases/realtime/func/pi-tests/test-skeleton.c
===================================================================
--- ltp.orig/testcases/realtime/func/pi-tests/test-skeleton.c
+++ ltp/testcases/realtime/func/pi-tests/test-skeleton.c
@@ -25,7 +25,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
@@ -43,15 +42,12 @@
#include <sys/wait.h>
#include <time.h>
#include <librttest.h>
-#include <libjvmsim.h>
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("testpi-5 and 6 specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -59,9 +55,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -106,15 +99,8 @@ int main(int argc, char **argv)
int status;
setup();
- rt_init("jh",parse_args,argc,argv);
+ rt_init("h",parse_args,argc,argv);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
pid = fork();
if ( 0 == pid) {
//This is the child
Index: ltp/testcases/realtime/func/prio-preempt/prio-preempt.c
===================================================================
--- ltp.orig/testcases/realtime/func/prio-preempt/prio-preempt.c
+++ ltp/testcases/realtime/func/prio-preempt/prio-preempt.c
@@ -49,7 +49,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Dinakar Guniguntala <[EMAIL PROTECTED]>
@@ -85,7 +84,6 @@ static pthread_cond_t cond[NUM_WORKERS+1
static int t_after_wait[NUM_WORKERS];
static int ret = 0;
-static int run_jvmsim=0;
pthread_barrier_t barrier;
@@ -93,7 +91,6 @@ void usage(void)
{
rt_help();
printf("prio-preempt specific options:\n");
- printf(" -j # :enable jvmsim\n");
printf(" -i #: enable interrupter threads\n");
printf(" -n# #: number of busy threads\n");
}
@@ -103,9 +100,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -294,7 +288,7 @@ int main(int argc, char* argv[])
setup();
pass_criteria = CHECK_LIMIT;
- rt_init("jhin:", parse_args, argc, argv);
+ rt_init("hin:", parse_args, argc, argv);
numcpus = sysconf(_SC_NPROCESSORS_ONLN);
Index: ltp/testcases/realtime/func/prio-wake/prio-wake.c
===================================================================
--- ltp.orig/testcases/realtime/func/prio-wake/prio-wake.c
+++ ltp/testcases/realtime/func/prio-wake/prio-wake.c
@@ -54,8 +54,6 @@
#include <errno.h>
#include <sys/syscall.h>
#include <librttest.h>
-#include <libjvmsim.h>
-
volatile int running_threads = 0;
static int rt_threads = 0;
static pthread_cond_t cond = PTHREAD_COND_INITIALIZER;
@@ -63,13 +61,11 @@ static pthread_mutex_t mutex;
static volatile nsec_t beginrun;
static int ret = 0;
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("prio-wake specific options:\n");
- printf(" -j #: enable jvmsim\n");
printf(" -n# #: number of worker threads\n");
}
@@ -78,9 +74,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -168,14 +161,7 @@ int main(int argc, char* argv[])
int i;
setup();
- rt_init("jhn:", parse_args, argc, argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("hn:", parse_args, argc, argv);
if (rt_threads == 0) {
numcpus = sysconf(_SC_NPROCESSORS_ONLN);
Index: ltp/testcases/realtime/func/pthread_kill_latency/pthread_kill_latency.c
===================================================================
--- ltp.orig/testcases/realtime/func/pthread_kill_latency/pthread_kill_latency.c
+++ ltp/testcases/realtime/func/pthread_kill_latency/pthread_kill_latency.c
@@ -51,7 +51,6 @@
#include <signal.h>
#include <errno.h>
#include <librttest.h>
-#include <libjvmsim.h>
#include <libstats.h>
#define PRIO 89
@@ -69,13 +68,11 @@ int fail;
atomic_t flag;
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("pthread_kill_latency specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -l threshold trace latency with given threshold in us\n");
}
@@ -84,9 +81,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'l':
latency_threshold = strtoull(v, NULL, 0);
break;
@@ -281,7 +275,7 @@ int main(int argc, char *argv[])
setup();
pass_criteria = THRESHOLD;
- rt_init("jl:h", parse_args, argc, argv); /* we need the buffered
print system */
+ rt_init("l:h", parse_args, argc, argv); /* we need the buffered print
system */
printf("-------------------------------\n");
printf("pthread_kill Latency\n");
@@ -289,13 +283,6 @@ int main(int argc, char *argv[])
printf("Iterations: %d\n", ITERATIONS);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
debug(DBG_DEBUG, "Main creating threads\n");
fflush(stdout);
Index: ltp/testcases/realtime/func/sched_football/sched_football.c
===================================================================
--- ltp.orig/testcases/realtime/func/sched_football/sched_football.c
+++ ltp/testcases/realtime/func/sched_football/sched_football.c
@@ -41,7 +41,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* John Stultz <[EMAIL PROTECTED] >
@@ -66,7 +65,6 @@
#include <unistd.h>
#include <sys/time.h>
#include <librttest.h>
-#include <libjvmsim.h>
#define DEF_GAME_LENGTH 5
@@ -76,7 +74,6 @@ volatile int the_ball;
/* pthread_barrier for synchronization */
pthread_barrier_t barrier;
-static int run_jvmsim=0;
static int players_per_team = 0;
static int game_length = DEF_GAME_LENGTH;
@@ -84,7 +81,6 @@ void usage(void)
{
rt_help();
printf("sched_football specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -nPLAYERS players per team (defaults to num_cpus)\n");
printf(" -lGAME_LENGTH game length in seconds (defaults to %d s)\n",
DEF_GAME_LENGTH);
@@ -95,9 +91,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -171,18 +164,11 @@ int main(int argc, char* argv[])
int i;
setup();
- rt_init("n:l:jh",parse_args,argc,argv);
+ rt_init("n:l:h",parse_args,argc,argv);
if (players_per_team == 0)
players_per_team = sysconf(_SC_NPROCESSORS_ONLN);
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
if ((i = pthread_barrier_init(&barrier, NULL, players_per_team*2 + 1)))
{
printf("pthread_barrier_init failed: %s\n", strerror(i));
exit(i);
Index: ltp/testcases/realtime/func/sched_jitter/sched_jitter.c
===================================================================
--- ltp.orig/testcases/realtime/func/sched_jitter/sched_jitter.c
+++ ltp/testcases/realtime/func/sched_jitter/sched_jitter.c
@@ -31,7 +31,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* John Stultz <[EMAIL PROTECTED]>
@@ -49,7 +48,6 @@
#include <unistd.h>
#include <libstats.h>
#include <librttest.h>
-#include <libjvmsim.h>
#define NUMRUNS 1000
#define NUMLOOPS 1000000
@@ -61,13 +59,11 @@ int array[WORKLEN];
volatile int flag; /*let interrupter know we're done */
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("sched_jitter specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -75,9 +71,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -176,14 +169,7 @@ int main(int argc, char *argv[])
setup();
- rt_init("jh",parse_args,argc,argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("h",parse_args,argc,argv);
interrupter = create_fifo_thread(thread_interrupter, NULL, 80);
sleep(1);
Index: ltp/testcases/realtime/func/sched_latency/sched_latency.c
===================================================================
--- ltp.orig/testcases/realtime/func/sched_latency/sched_latency.c
+++ ltp/testcases/realtime/func/sched_latency/sched_latency.c
@@ -34,7 +34,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -51,7 +50,6 @@
#include <math.h>
#include <librttest.h>
#include <libstats.h>
-#include <libjvmsim.h>
#define PRIO 89
//#define PERIOD 17*NS_PER_MS
@@ -66,7 +64,6 @@
nsec_t start;
nsec_t end;
-static int run_jvmsim = 0;
static int ret = 0;
static int iterations = 0;
static unsigned long long latency_threshold = 0;
@@ -81,7 +78,6 @@ void usage(void)
{
rt_help();
printf("sched_latency specific options:\n");
- printf(" -j enable jvmsim\n");
printf(" -dLOAD periodic load in ms (default 1)\n");
printf(" -lTHRESHOLD trace latency, with given threshold in us\n");
printf(" -tPERIOD period in ms (default 5)\n");
@@ -94,9 +90,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -235,7 +228,7 @@ int main(int argc, char *argv[])
setup();
pass_criteria = PASS_US;
- rt_init("d:jl:ht:i:", parse_args, argc, argv);
+ rt_init("d:l:ht:i:", parse_args, argc, argv);
printf("-------------------------------\n");
printf("Scheduling Latency\n");
@@ -260,13 +253,6 @@ int main(int argc, char *argv[])
printf("Expected running time: %d s\n",
(int)(iterations*((float)period / NS_PER_SEC)));
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
-
if (stats_container_init(&dat, iterations))
exit(1);
Index: ltp/testcases/realtime/func/thread_clock/tc-2.c
===================================================================
--- ltp.orig/testcases/realtime/func/thread_clock/tc-2.c
+++ ltp/testcases/realtime/func/thread_clock/tc-2.c
@@ -31,7 +31,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Sripathi Kodi <[EMAIL PROTECTED]>
@@ -48,7 +47,6 @@
#include <stdlib.h>
#include <unistd.h>
#include <librttest.h>
-#include <libjvmsim.h>
#define NS_PER_SEC 1000000000
#define THRESHOLD 0.5 /* 500 milliseconds */
@@ -57,22 +55,17 @@
struct timespec sleepts[NUMSLEEP];
struct timespec workts[NUMWORK];
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("thread_clock specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
{
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -184,14 +177,7 @@ int main(int argc,char* argv[])
setup();
pass_criteria = THRESHOLD;
- rt_init("jht:",parse_args,argc,argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("ht:",parse_args,argc,argv);
/* Start sleeper threads */
for (i=0; i<NUMSLEEP; i++) {
Index: ltp/testcases/realtime/perf/latency/pthread_cond_latency.c
===================================================================
--- ltp.orig/testcases/realtime/perf/latency/pthread_cond_latency.c
+++ ltp/testcases/realtime/perf/latency/pthread_cond_latency.c
@@ -24,7 +24,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Paul E. McKenney <[EMAIL PROTECTED]>
@@ -43,19 +42,16 @@
#include <unistd.h>
#include <stdlib.h>
#include <librttest.h>
-#include <libjvmsim.h>
pthread_mutex_t child_mutex = PTHREAD_MUTEX_INITIALIZER;
volatile int child_waiting = 0;
double endtime;
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("testpi-1 specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -63,9 +59,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -206,14 +199,7 @@ main(int argc, char *argv[])
long iter;
setup();
- rt_init("jh", parse_args, argc, argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("h", parse_args, argc, argv);
sp.sched_priority = sched_get_priority_max(SCHED_FIFO);
if (sp.sched_priority == -1) {
Index: ltp/testcases/realtime/stress/pi-tests/lookup_pi_state.c
===================================================================
--- ltp.orig/testcases/realtime/stress/pi-tests/lookup_pi_state.c
+++ ltp/testcases/realtime/stress/pi-tests/lookup_pi_state.c
@@ -24,7 +24,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
* Darren Hart <[EMAIL PROTECTED]>
@@ -36,12 +35,10 @@
#include <stdio.h>
#include <librttest.h>
-#include <libjvmsim.h>
#define NUM_SLAVES 20
#define SLAVE_PRIO 89
-int enable_jvmsim = 0;
pthread_mutex_t MM;
pthread_mutex_t MS;
@@ -54,13 +51,11 @@ atomic_t slave_order_a = {0};
atomic_t slave_order_b = {0};
atomic_t slave_order_c = {0};
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("lookup_pi_state specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -68,9 +63,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -180,15 +172,7 @@ int main(int argc, char *argv[])
pthread_cond_init(&CS, NULL);
pthread_cond_init(&CT, NULL);
- rt_init("jh", parse_args, argc, argv);
-
- // -j to enable jvmsim
- if (run_jvmsim) {
- printf("jvmsim Enabled\n");
- jvmsim_init();
- } else {
- printf("jvmsim disabled \n");
- }
+ rt_init("h", parse_args, argc, argv);
create_other_thread(master_thread, (void *)0);
Index: ltp/testcases/realtime/stress/pi-tests/testpi-3.c
===================================================================
--- ltp.orig/testcases/realtime/stress/pi-tests/testpi-3.c
+++ ltp/testcases/realtime/stress/pi-tests/testpi-3.c
@@ -24,7 +24,6 @@
*
* USAGE:
* Use run_auto.sh script in current directory to build and run test.
- * Use "-j" to enable jvm simulator.
*
* AUTHOR
*
@@ -43,15 +42,11 @@
#include <sys/syscall.h>
#include <unistd.h>
#include <librttest.h>
-#include <libjvmsim.h>
-
-static int run_jvmsim=0;
void usage(void)
{
rt_help();
printf("testpi-3 specific options:\n");
- printf(" -j enable jvmsim\n");
}
int parse_args(int c, char *v)
@@ -59,9 +54,6 @@ int parse_args(int c, char *v)
int handled = 1;
switch (c) {
- case 'j':
- run_jvmsim = 1;
- break;
case 'h':
usage();
exit(0);
@@ -322,14 +314,7 @@ int main(int argc, char* argv[]) {
CPU_SET(0, &mask);
setup();
- rt_init("jh",parse_args,argc,argv);
-
- if (run_jvmsim) {
- printf("jvmsim enabled\n");
- jvmsim_init(); // Start the JVM simulation
- } else {
- printf("jvmsim disabled\n");
- }
+ rt_init("h",parse_args,argc,argv);
retc = sched_setaffinity(0, sizeof(mask), &mask);
if (retc < 0) {
--
-Thanks,Chirag
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
