HI,

      here i am sending the log of the problem so that you can sugggest some
method to solve this issue.




INFO: creating /opt/ltp/results directory
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

STMicroelectronics Base Distribution 2.4
Linux 192.168.1.10 2.6.32 #2 SMP Tue Oct 19 17:34:35 IST 2010 armv7l unknown
unknown GNU/Linux

Gnu C                  gcc (GCC) 4.5.0
Gnu make               3.81
util-linux             ng 2.16.1)
mount                  ng 2.16.1 (with libblkid support)
modutils               3.1
e2fsprogs              1.41.9
PPP                    2.4.4
Linux C Library        2.10.1
Dynamic linker (ldd)   2.10.1
Linux C++ Library      6.0.14
Procps                 3.2.7
Net-tools              1.60
iproute2              iproute2-ss100224
Console-tools          0.2.3
Sh-utils               5.2.1
Modules Loaded
free reports:
             total       used       free     shared    buffers     cached
Mem:        255368      20632     234736          0          0      10948
-/+ buffers/cache:       9684     245684
Swap:            0          0          0
/proc/cpuinfo
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 996.14
processor : 1
BogoMIPS : 996.14
Features : swp half thumb fastmult vfp edsp vfpv3 vfpv3d16
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x1
CPU part : 0xc09
CPU revision : 1
Hardware : ST-SPEAR1310-EVB
Revision : 0000
Serial  : 0000000000000000
remove test cases which require the block device.
You can specify it with option -b
COMMAND:    /opt/ltp/bin/ltp-pan  -e -S   -a 1241     -n 1241  -p  -f
/tmp/ltp-HcxbKw1247/alltests -l
/opt/ltp/results/network_stress.broken_ip.result  -C
/opt/ltp/output/LTP_RUN_ON-network_stress.broken_ip.result.failed
LOG File: /opt/ltp/results/network_stress.broken_ip.result
FAILED COMMAND File:
/opt/ltp/output/LTP_RUN_ON-network_stress.broken_ip.result.failed
Running tests.......
<<<test_start>>>
tag=broken_ip4-version stime=278
cmdline="broken_ip4-version"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-version01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in
version field.
broken_ip4-version01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-version01    1  TBROK  :  Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=8 cstime=19
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-ihl stime=279
cmdline="broken_ip4-ihl"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-ihl01    0  TINFO  :  Verify that the kernel is not crashed with
receiving a large number of IPv4 packets that have wrong value in the header
length field.
broken_ip4-ihl01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-ihl01    1  TBROK  :  Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=11 cstime=21
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-totlen stime=279
cmdline="broken_ip4-totlen"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-totlen01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in the
total length field.
broken_ip4-totlen01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-totlen01    1  TBROK  :  Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=10 cstime=24
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-fragment stime=280
cmdline="broken_ip4-fragment"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-fragment01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong fragment
information
broken_ip4-fragment01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-fragment01    1  TBROK  :  Failed to get the interface name at
the remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=11 cstime=14
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-protcol stime=280
cmdline="broken_ip4-protcol"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-protocol01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in the
protocol field
broken_ip4-protocol01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-protocol01    1  TBROK  :  Failed to get the interface name at
the remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=7 cstime=21
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-checksum stime=280
cmdline="broken_ip4-checksum"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-checksum01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in the
checksum field
broken_ip4-checksum01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-checksum01    1  TBROK  :  Failed to get the interface name at
the remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=6 cstime=22
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-dstaddr stime=281
cmdline="broken_ip4-dstaddr"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-dstaddr01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv4 packets whose destination address is
wrong (destination MAC address is correct)
broken_ip4-dstaddr01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-dstaddr01    1  TBROK  :  Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=9 cstime=18
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-dstaddr stime=281
cmdline="broken_ip6-dstaddr"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-dstaddr01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv6 packets whose destination address is
wrong (destination MAC address is correct)
broken_ip6-dstaddr01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-dstaddr01    1  TBROK  :  Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=6 cstime=20
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-nexthdr stime=281
cmdline="broken_ip6-nexthdr"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-nexthdr01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv6 packets that have wrong value in the
next header field.
broken_ip6-nexthdr01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-nexthdr01    1  TBROK  :  Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=6 cstime=18
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-plen stime=282
cmdline="broken_ip6-plen"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-plen01    0  TINFO  :  Verify that the kernel is not crashed with
receiving a large number of IPv6 packets that have wrong value in the
payload length field.
broken_ip6-plen01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-plen01    1  TBROK  :  Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=5 cstime=23
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-version stime=282
cmdline="broken_ip6-version"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-version01    0  TINFO  :  Verify that the kernel is not crashed
with receiving a large number of IPv6 packets that have wrong value in
version field.
broken_ip6-version01    0  TINFO  :  - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-version01    1  TBROK  :  Failed to get the interface name at the
remote host
incrementing stop
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=11 cstime=22
<<<test_end>>>
INFO: ltp-pan reported some tests FAIL
LTP Version: LTP-20100131

       ###############################################################"

            Done executing testcases."
            LTP Version:  LTP-20100131
       ###############################################################"









On Tue, Nov 9, 2010 at 2:16 PM, ARJIT SHARMA <[email protected]> wrote:

> Hi Garrett,
>
>                  As i am running LTP on embedded system ie. on the board
> through network file system(NFS).
>
>                  I have ARM architechture and STlinux-2.4 Distribution.
>
>                 so, i cannot give remote acess of my environment, and these
> tests are very important to execute, i tried with many changes for these
> tests, but cant get a way out.
>
>                 Although i can send u log of the testcase.
>
>                 please suggest me some way to resolve this problem.
> --
> Best Regards,
> Arjit Sharma.
>
>


-- 
Best Regards,
Arjit Sharma.
------------------------------------------------------------------------------
The Next 800 Companies to Lead America's Growth: New Video Whitepaper
David G. Thomson, author of the best-selling book "Blueprint to a 
Billion" shares his insights and actions to help propel your 
business during the next growth cycle. Listen Now!
http://p.sf.net/sfu/SAP-dev2dev
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Reply via email to