Actually Network related tests are failing, like :--
network_stress.broken_ip
network_stress.icmp
network_stress.interface
network_stress.multicast
network_stress.tcp
here I am sending you the log of "network_stress.broken.ip" testcase...
similar error is come in all the above mentioned tests
"TBROK: Failed to get the interface name at the remote host.".
INFO: creating /opt/ltp/results directory
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
STMicroelectronics Base Distribution 2.4
Linux 192.168.1.10 2.6.32 #2 SMP Tue Oct 19 17:34:35 IST 2010 armv7l unknown
unknown GNU/Linux
Gnu C gcc (GCC) 4.5.0
Gnu make 3.81
util-linux ng 2.16.1)
mount ng 2.16.1 (with libblkid support)
modutils 3.1
e2fsprogs 1.41.9
PPP 2.4.4
Linux C Library 2.10.1
Dynamic linker (ldd) 2.10.1
Linux C++ Library 6.0.14
Procps 3.2.7
Net-tools 1.60
iproute2 iproute2-ss100224
Console-tools 0.2.3
Sh-utils 5.2.1
Modules Loaded
free reports:
total used free shared buffers cached
Mem: 255368 20632 234736 0 0 10948
-/+ buffers/cache: 9684 245684
Swap: 0 0 0
/proc/cpuinfo
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 996.14
processor : 1
BogoMIPS : 996.14
Features : swp half thumb fastmult vfp edsp vfpv3 vfpv3d16
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x1
CPU part : 0xc09
CPU revision : 1
Hardware : ST-SPEAR1310-EVB
Revision : 0000
Serial : 0000000000000000
remove test cases which require the block device.
You can specify it with option -b
COMMAND: /opt/ltp/bin/ltp-pan -e -S -a 1241 -n 1241 -p -f
/tmp/ltp-HcxbKw1247/alltests -l
/opt/ltp/results/network_stress.broken_ip.result -C
/opt/ltp/output/LTP_RUN_ON-network_stress.broken_ip.result.failed
LOG File: /opt/ltp/results/network_stress.broken_ip.result
FAILED COMMAND File:
/opt/ltp/output/LTP_RUN_ON-network_stress.broken_ip.result.failed
Running tests.......
<<<test_start>>>
tag=broken_ip4-version stime=278
cmdline="broken_ip4-version"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-version01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in
version field.
broken_ip4-version01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-version01 1 TBROK : Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=8 cstime=19
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-ihl stime=279
cmdline="broken_ip4-ihl"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-ihl01 0 TINFO : Verify that the kernel is not crashed with
receiving a large number of IPv4 packets that have wrong value in the header
length field.
broken_ip4-ihl01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-ihl01 1 TBROK : Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=11 cstime=21
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-totlen stime=279
cmdline="broken_ip4-totlen"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-totlen01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in the
total length field.
broken_ip4-totlen01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-totlen01 1 TBROK : Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=10 cstime=24
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-fragment stime=280
cmdline="broken_ip4-fragment"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-fragment01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong fragment
information
broken_ip4-fragment01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-fragment01 1 TBROK : Failed to get the interface name at
the remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=11 cstime=14
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-protcol stime=280
cmdline="broken_ip4-protcol"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-protocol01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in the
protocol field
broken_ip4-protocol01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-protocol01 1 TBROK : Failed to get the interface name at
the remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=7 cstime=21
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-checksum stime=280
cmdline="broken_ip4-checksum"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-checksum01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv4 packets that have wrong value in the
checksum field
broken_ip4-checksum01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-checksum01 1 TBROK : Failed to get the interface name at
the remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=6 cstime=22
<<<test_end>>>
<<<test_start>>>
tag=broken_ip4-dstaddr stime=281
cmdline="broken_ip4-dstaddr"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip4-dstaddr01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv4 packets whose destination address is
wrong (destination MAC address is correct)
broken_ip4-dstaddr01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip4-dstaddr01 1 TBROK : Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=9 cstime=18
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-dstaddr stime=281
cmdline="broken_ip6-dstaddr"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-dstaddr01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv6 packets whose destination address is
wrong (destination MAC address is correct)
broken_ip6-dstaddr01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-dstaddr01 1 TBROK : Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=6 cstime=20
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-nexthdr stime=281
cmdline="broken_ip6-nexthdr"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-nexthdr01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv6 packets that have wrong value in the
next header field.
broken_ip6-nexthdr01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-nexthdr01 1 TBROK : Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=1 corefile=no
cutime=6 cstime=18
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-plen stime=282
cmdline="broken_ip6-plen"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-plen01 0 TINFO : Verify that the kernel is not crashed with
receiving a large number of IPv6 packets that have wrong value in the
payload length field.
broken_ip6-plen01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-plen01 1 TBROK : Failed to get the interface name at the
remote host
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=5 cstime=23
<<<test_end>>>
<<<test_start>>>
tag=broken_ip6-version stime=282
cmdline="broken_ip6-version"
contacts=""
analysis=exit
<<<test_output>>>
broken_ip6-version01 0 TINFO : Verify that the kernel is not crashed
with receiving a large number of IPv6 packets that have wrong value in
version field.
broken_ip6-version01 0 TINFO : - Test duration is 3600 [sec]
cut: option requires an argument -- 'f'
Try `cut --help' for more information.
HWaddr list () is something wrong.
broken_ip6-version01 1 TBROK : Failed to get the interface name at the
remote host
incrementing stop
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=1 corefile=no
cutime=11 cstime=22
<<<test_end>>>
INFO: ltp-pan reported some tests FAIL
LTP Version: LTP-20100131
###############################################################"
Done executing testcases."
LTP Version: LTP-20100131
###############################################################"
On Mon, Nov 29, 2010 at 7:07 PM, Serge E. Hallyn <[email protected]
> wrote:
> Quoting ARJIT SHARMA ([email protected]):
> > Hi,
> >
> > I was trying to run network stress tests on my side, but none of
> them
> > is passing.
> >
> > it is not able to find the harware address at remote host, altough
> the
> > settings and configurations are as required and as mentioned in README
> and
> > INSTALL files.
> >
> > So can u please tell me that whether these stress tests are meant
> to
> > be run on embedded boards, do they always cause problems, if u have
> executed
> > them?
>
> Which tests exactly are failing? (You say network stress tests, but cc:d
> me implying you meant netns netsts) Can you send us the relevant logs?
>
--
Best Regards,
Arjit Sharma.
------------------------------------------------------------------------------
Increase Visibility of Your 3D Game App & Earn a Chance To Win $500!
Tap into the largest installed PC base & get more eyes on your game by
optimizing for Intel(R) Graphics Technology. Get started today with the
Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs.
http://p.sf.net/sfu/intelisp-dev2dev
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
