* Delete trace_logic that is used to debug.
* Use test.sh script and use tst_* instead of end_testcase.
* Delete some unuseful comments.
* Fix old-style function definition.
Signed-off-by: Zeng Linggang <zenglg...@cn.fujitsu.com>
---
testcases/network/multicast/mc_member/mc_member | 238 +++++++++---------------
testcases/network/multicast/mc_member/member.c | 21 +--
2 files changed, 92 insertions(+), 167 deletions(-)
diff --git a/testcases/network/multicast/mc_member/mc_member
b/testcases/network/multicast/mc_member/mc_member
index 3ffdc99..d24690a 100755
--- a/testcases/network/multicast/mc_member/mc_member
+++ b/testcases/network/multicast/mc_member/mc_member
@@ -33,188 +33,116 @@ unset LIBPATH
# -Ported
#
#******************************************************************************
-#Uncomment the line below for debug output
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
TC=mc_member
TCsrc=${TCsrc:-`pwd`}
-TCtmp=${TCtmp:-$TCsrc/$TC$$}
-CLEANUP=${CLEANUP:-ON}
-EXECUTABLES=${EXECUTABLES:-"member"}
-NUMLOOPS=${NUMLOOPS:-2}
-INTERFACE=${INTERFACE:-$(mc_gethost `hostname`| grep address |awk '{ print $2
}')}
+INTERFACE=${INTERFACE:-$(mc_gethost `hostname`|grep address|awk '{ print $2
}')}
GLIST=${GLIST:-$TCsrc/ManyGroups}
TooManyGLIST=${TooManyGLIST:-$TCsrc/TooManyGroups}
-ERRFILE=${ERRFILE:-$TCtmp/errors}
+ERRFILE=${ERRFILE:-errors}
export TCID=$TC
export TST_TOTAL=1
export TST_COUNT=1
-this_file=${0##*/}
-trap "interrupt_test" 2
+. test.sh
setup()
{
- mkdir -p $TCtmp
+ tst_tmpdir
}
get_address()
{
- DIGIT=`ps -ef | grep mc_member | grep -v grep | wc -l`
- ADDRESS=$DIGIT.$DIGIT.$DIGIT.$DIGIT
+ DIGIT=`ps -ef | grep mc_member | grep -v grep | wc -l`
+ ADDRESS=$DIGIT.$DIGIT.$DIGIT.$DIGIT
}
-#******************************************************************************
-#
-# FUNCTION: do_test
-# PURPOSE: Executes the testcases.
-# INPUT: Number of iterations
-# OUTPUT: Error messages are logged when any verification test
-# fails.
-#
-#-----------------------------------------------------------------------
-
do_test()
{
- $trace_logic
- echo "$this_file: doing $0."
-
- COUNT=1
- while [ $COUNT -le $NUMLOOPS ]
- do
- # Run setsockopt test with bogus network
- get_address
- echo "Running mc_member_e on $ADDRESS"
- $TCsrc/$EXECUTABLES -j -g $GLIST -s 30 -i $ADDRESS >/dev/null 2>&1
-
- # Run setsockopt/getsockopt test
-
- $TCsrc/$EXECUTABLES -g $GLIST -s 80 -i $INTERFACE > $ERRFILE 2>&1 &
-
- # Join twice and leave once and see if the groups are still joined on
- # all specified interfaces.
-
- for agroup in `cat $GLIST`
- do
- echo "Running (1st) member on $INTERFACE"
- $TCsrc/$EXECUTABLES -j -g $GLIST -s 30 -i $INTERFACE > $ERRFILE 2>&1 &
- sleep 5
- grep "cannot join group" $ERRFILE
- [ $? = 0 ] && end_testcase "MC group could NOT join $INTERFACE"
-
- echo "Running (2nd) member on $INTERFACE"
- $TCsrc/$EXECUTABLES -g $GLIST -s 60 -i $INTERFACE > $ERRFILE 2>&1 &
- sleep 5
- grep "cannot join group" $ERRFILE
- [ $? = 0 ] && end_testcase "MC group could NOT join $INTERFACE"
- done
-
- # See if the groups are joined
-
- for agroup in `cat $GLIST`
- do
- netstat -gn | grep $agroup
- [ $? = 0 ] || end_testcase "$agroup NOT joined to $INTERFACE"
-
- # See if they respond to a ping.
- #ping -c 3 -I $INTERFACE $agroup
- #[ $? != 0 ] && { echo "Error - $TC: $agroup NOT responding over
$INTERFACE" ;}
-
- done
-
- echo "Waiting 60 seconds! Do not interrupt!"
- sleep 60 # Make sure the first process has stopped
-
- for agroup in `cat $GLIST`
- do
- netstat -gn | grep $agroup
- if [ $? != 1 ]; then
- end_testcase "$agroup still joined on $INTERFACE"
- fi
- done
-
- # Test the membership boundaries
-
- echo "Running member on too many groups over $INTERFACE"
- $TCsrc/$EXECUTABLES -j -g $TooManyGLIST -i $INTERFACE > $ERRFILE 2>&1 &
-
- count=`grep 105 $ERRFILE | wc -l`
-
- [ $count -gt 3 ] && end_testcase "Could not join members!"
-
- COUNT=$(( $COUNT + 1 ))
-
- done # end of while numloop
+ tst_resm TINFO "doing test."
+
+ COUNT=1
+ while [ $COUNT -le 2 ]
+ do
+ # Run setsockopt test with bogus network
+ get_address
+ tst_resm TINFO "Running mc_member_e on $ADDRESS"
+ member -j -g $GLIST -s 30 -i $ADDRESS >/dev/null 2>&1
+
+ # Run setsockopt/getsockopt test
+ member -g $GLIST -s 80 -i $INTERFACE > $ERRFILE 2>&1 &
+
+ # Join twice and leave once and see if the groups are still
+ # joined on all specified interfaces.
+ for agroup in `cat $GLIST`
+ do
+ tst_resm TINFO "Running (1st) member on $INTERFACE"
+ member -j -g $GLIST -s 30 -i $INTERFACE \
+ > $ERRFILE 2>&1 &
+ sleep 5
+ grep "cannot join group" $ERRFILE
+ if [ $? -eq 0 ]; then
+ tst_brkm FAIL "MC group could NOT join "\
+ "$INTERFACE"
+ fi
+
+ tst_resm TINFO "Running (2nd) member on $INTERFACE"
+ member -g $GLIST -s 60 -i $INTERFACE > $ERRFILE 2>&1 &
+ sleep 5
+ grep "cannot join group" $ERRFILE
+ if [ $? -eq 0 ]; then
+ tst_brkm FAIL "MC group could NOT join "\
+ "$INTERFACE"
+ fi
+ done
+
+ # See if the groups are joined
+ for agroup in `cat $GLIST`
+ do
+ netstat -gn | grep $agroup
+ if [ $? -ne 0 ]; then
+ tst_brkm FAIL "$agroup NOT joined to $INTERFACE"
+ fi
+ done
+
+ tst_resm TINFO "Waiting 60 seconds! Do not interrupt!"
+ sleep 60 # Make sure the first process has stopped
+
+ for agroup in `cat $GLIST`
+ do
+ netstat -gn | grep $agroup
+ if [ $? -ne 1 ]; then
+ tst_brkm FAIL "$agroup still joined on "\
+ "$INTERFACE"
+ fi
+ done
+
+ # Test the membership boundaries
+ tst_resm TINFO "Running member on too many groups over "\
+ "$INTERFACE"
+ member -j -g $TooManyGLIST -i $INTERFACE > $ERRFILE 2>&1 &
+
+ count=`grep 105 $ERRFILE | wc -l`
+ if [ $count -gt 3 ]; then
+ tst_brkm FAIL "Could not join members!"
+ fi
+
+ COUNT=$(( $COUNT + 1 ))
+
+ done
+
+ tst_resm TPASS "Test Successful"
+ tst_exit
}
-#-----------------------------------------------------------------------
-#
-# FUNCTION: do_cleanup
-# PURPOSE: Called when the testcase is interrupted by the user
-# or by interrupt_testcase() when time limit expired
-# INPUT: None.
-# OUTPUT: None.
-#
-#-----------------------------------------------------------------------
-
do_cleanup()
{
- $trace_logic
- echo "$this_file: doing $0."
-
- rm -rf $TCtmp
-}
-
-#=============================================================================
-# FUNCTION NAME: end_testcase
-#
-# FUNCTION DESCRIPTION: Clean up
-#
-# PARAMETERS: string, IF AND ONLY IF the testcase fails
-#
-# RETURNS: None.
-#=============================================================================
-
-end_testcase()
-{
- $trace_logic
- echo "$this_file: doing $0."
-
- # Call other cleanup functions
- [ $CLEANUP = "ON" ] && do_cleanup
-
- [ $# = 0 ] && { tst_resm TPASS "Test Successful"; exit 0; }
- tst_resm TFAIL "Test Failed: $@"
- exit 1
-}
-
-#******************************************************************************
-#
-# FUNCTION: interrupt_test
-# PURPOSE: Handle process interrupts set by trap.
-# INPUT: none
-# OUTPUT: none
-#
-#******************************************************************************
-
-interrupt_test()
-{
- echo "test interrupted"
- end_testcase
+ tst_rmdir
}
-#******************************************************************************
-#
-# FUNCTION: MAIN
-# PURPOSE: To invoke functions that perform the tasks as described in
-# the design in the prolog above.
-# INPUT: See SETUP in the prolog above.
-# OUTPUT: Logged run results written to testcase run log
-#
-#******************************************************************************
setup
+TST_CLEANUP=do_cleanup
+
do_test
-end_testcase
diff --git a/testcases/network/multicast/mc_member/member.c
b/testcases/network/multicast/mc_member/member.c
index 5b51dbe..810b786 100644
--- a/testcases/network/multicast/mc_member/member.c
+++ b/testcases/network/multicast/mc_member/member.c
@@ -9,17 +9,14 @@
#include <netdb.h>
#include <unistd.h>
-char *prog;
-int errors = 0;
-int ttl_no = 255;
+static char *prog;
+static int errors;
-int join_group(int, char *, struct ip_mreq *);
-int leave_group(int, char *, struct ip_mreq *);
-void usage(void);
+static int join_group(int, char *, struct ip_mreq *);
+static int leave_group(int, char *, struct ip_mreq *);
+static void usage(void);
-int main(argc, argv)
-int argc;
-char *argv[];
+int main(int argc, char *argv[])
{
int s;
struct ip_mreq imr;
@@ -111,7 +108,7 @@ char *argv[];
return (0);
}
-int join_group(int s, char *glist, struct ip_mreq *imr)
+static int join_group(int s, char *glist, struct ip_mreq *imr)
{
char buf[40];
unsigned g1, g2, g3, g4;
@@ -145,7 +142,7 @@ int join_group(int s, char *glist, struct ip_mreq *imr)
return (0);
}
-int leave_group(int s, char *glist, struct ip_mreq *imr)
+static int leave_group(int s, char *glist, struct ip_mreq *imr)
{
char buf[40];
unsigned g1, g2, g3, g4;
@@ -178,7 +175,7 @@ int leave_group(int s, char *glist, struct ip_mreq *imr)
return (0);
}
-void usage()
+static void usage(void)
{
fprintf(stderr,
"usage: %s [ -j -l ] -g group_list [-s time_to_sleep] -i
interface_name (or i.i.i.i)\n",
--
1.9.3
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
